LS-2650 C II Link-Belt excavator specs & Dimensions (1989 - 1991)

Link-Belt LS-2650 C II is a crawler excavator manufactured from 1989 to 1991. It has a weight of 12 tons and a track width of 600 …

Link-Belt LS-2650 C II is a crawler excavator manufactured from 1989 to 1991. It has a weight of 12 tons and a track width of 600 mm. The transport dimensions are 7 meters in length, 2 meters in width, and 2 meters in height. The excavator features a tear-out force of 74 kN, a dredging depth of 5 meters, and a maximum horizontal reach of 8 meters. It is equipped with track adjustment.

Crawler Excavators Link-Belt LS-2650 C II

Technical specs - LS-2650 C II Link-Belt

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Weight
12.1 t
Transport length
7.69 m
Transport width
2.59 m
Transport height
2.65 m
Bucket capacity min.
0.37 m³
Bucket capacity max.
0.48 m³
Undercarriage
SL
Track width
600 mm
Boom
MB
Max. Reach horizontal
8.54 m
Dredging depth
5.96 m
Tear-out force
74.53 kN
Bucket width
0.95 m
Engine manuf.
Isuzu
Engine type
4BD1T
Engine power
65 kW
Displacement
3852 l
Revolutions at max torque
1600 rpm
Max. torque
290 Nm
No. of cylinders
4
Cylinder bore x stroke
102 x 118 mm

More technical details, like: bucket capacity, model series, dimension lxwxh, emission level are available in the full technical specs.

Basic model incl. ROPS cabin, traction drive, standard boom and standard bucket

Special equipment

Diesel particulate filter
No
Track adjustment
Yes
Blade
No
Cabin adjustment
No
Overload alert
No
Material Handling Excavator
No
Aircondition
No
Quick hitch hydr.
No
Quick hitch mech.
No

Download datasheets (PDF)

Link-Belt LS-2650 C II FAQ

When was the Link-Belt LS-2650 C II manufactured?

The Link-Belt LS-2650 C II was manufactured from 1989 to 1991.

How much does the Link-Belt LS-2650 C II weigh?

The Link-Belt LS-2650 C II weighs 12.1 tons.

What are the transport dimensions of the Link-Belt LS-2650 C II crawler excavator?

The Link-Belt LS-2650 C II has a transport length of 7.69 meters, a transport width of 2.59 meters, and a transport height of 2.65 meters.

What are the undercarriage specifications of the Link-Belt LS-2650 C II?

The Link-Belt LS-2650 C II has a standard undercarriage with a track width of 600 mm.

What are the excavation performance specifications of the Link-Belt LS-2650 C II?

The Link-Belt LS-2650 C II has a dredging depth of 5.96 meters, a maximum horizontal reach of 8.54 meters, and features a monobloc boom.

What is the tear-out force of the Link-Belt LS-2650 C II?

The Link-Belt LS-2650 C II has a tear-out force of 74.53 kN.

What is the bucket width of the Link-Belt LS-2650 C II crawler excavator?

The bucket width of the Link-Belt LS-2650 C II is 0.95 meters.

How much is a Link-Belt LS-2650 C II Crawler excavator (1989u20131991) worth?

The residual value of the Link-Belt LS-2650 C II depends on the machine's individual parameters. Visit the LECTURA Valuation to check it.

Link-Belt LS-2650 C II overview

Engine

Control Panel

Conveniently located in the right side control console are ignition switch, engine throttle, service monitor check button, engine stop button, control shut down switch, AM-FM radio and switches for wiper, heater fan, working lights, selectable fine control, digging mode select, manual throttle and emergency bypass switches.


Mode Select

The mode selection system enables the operator to program the machine’s speed to the job application. The operator can select three modes according to the job conditions: H-Heavy Duty (digging in rocky conditions, dense material). 100% of the engine horsepower is made available for maximum power in the ditch. S-Standard (general excavation, loading trucks). 85% of the engine horsepower is made available to match the machine to the application and conserve fuel. L-Lifting (setting pipe, placing manholes). 65% of the engine horsepower is made available for jobs where accuracy and safety are valued over speed.


One Touch Decelerator

Increased fine control and fuel savings can be realized by using the exclusive fine control selection system. The operator can select from three engine idle speeds: 1000 rpm for fine inching, 1200 rpm for setting pipe, or 1500 rpm for fine grading. At the touch of a button, the engine will automatically return to high idle for power and speed when the operator is ready to return to normal digging.


Hydraulic and electronic system

SCM Monitor

The SCM (Service Check Maintenance) monitor advises the operator on all critical machine functions at a glance. Both audio and visual warnings indicate low water, high engine temperature and engine oil pressure. Indicator lights monitor mode selection system, fine control, swing brake, glow plug, air intake restriction, two-speed travel and battery fluid level. Three bar gauges monitor fuel level, water temperature and hydraulic oil temperature.


Computer Aided Power System (CAPS)

The LS-2650 C-Series II CAPS hydraulic system with its variable volume/pressure compensated piston pumps and pilot controls provide smooth operation and maximum horsepower utilization. Fuel consumption is minimized by the digging and fine control mode selection systems and the integral Automatic Pump Destroking (APD) feature. Pump flows are automatically reduced to minimum output when control levers are in the neutral position. These systems save fuel and eliminate wasted engine and hydraulic power plus extend component life. The CAPS system enables the operator to simultaneously operate the swing, travel and attachment for full function control of the machine. This feature plus the automatic high speed arm and boom-hoist result in fast cycle times and increased production.


Cab

Lift-up Arm Rest

Left arm rest lifts up out of the way providing outstanding operator ease in entering or exiting cab. For safety, when arm rest is raised all upper control functions become inactive.


Maximum Window Area

The C-Series II cab is designed to provide maximum visibility for the operator with its full view front window and lower right and left hand windows.


Equipment

Serviceability

Servicing the LS-2650 is simplified by the use of wide opening doors and a torsion bar assisted engine hood. Standard quick disconnects for pressure checking and lube fittings for attachment provide quick routine maintenance.


Machine inspection

Ask for inspection of your Link-Belt LS-2650 C II from experts

Machine inspection

Mevas is an international operating inspection service for used heavy machinery. Construction machinery inspectors are available in more than 20 countries.

Use this service to minimise the risk when buying used equipment. An inspection by Mevas costs less than repairing a defective hydraulic cylinder.

Enquire machine inspection

Provided by: Mevas — The Heavy Equipment Inspectors

Buy & Rent

Compare Link-Belt LS-2650 C II with similar Crawler Excavators

Link-Belt LS-2650 C II

Link-Belt LS-2650 C II

Weight:
12.1 t
Transport length:
7.69 m
Transport width:
2.59 m
Transport height:
2.65 m
Case CX 130

Case CX 130

Weight:
12.6 t
Transport length:
7.49 m
Transport width:
2.69 m
Transport height:
2.74 m
Fiat-Hitachi FH 120

Fiat-Hitachi FH 120

Weight:
12.6 t
Transport length:
7.69 m
Transport width:
2.59 m
Transport height:
2.71 m
Mecalac 10 MCR

Mecalac 10 MCR

Weight:
10 t
Transport length:
3.27 m
Transport width:
2.3 m
Transport height:
2.97 m

Spare parts & Components

Get spare parts for Link-Belt LS-2650 C II easily from our partners

Spare parts

Do your lookup for high quality parts for Link-Belt LS-2650 C II online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Crawler Excavators spare parts easily today - worldwide.

Get parts for Link-Belt LS-2650 C II now!

Transport

Crawler Excavators Transport & Shipping Services

In case you look into transport options for your machine, utilise our services. Seek for the most appropriate transport quotes for Crawler Excavators built on transport dimensions and machine weight. Our partners provide extensive services to satisfy your demands.

Ask for transport price

Data provided by Lectura logo

News

Construction News by LECTURA 10.06.2026

More industry news