Solar 225 LC-V Doosan excavator specs & Dimensions (2003 - 2008)

Good visibility

The enlarged right-hand glass and the minimized crosswise strut in windshield have been achieved to increase the visual range by 15% when compared to the previous machine.

Long wind shield wiper blade

Front visibility is further improved by using the lengthened wiper blade (wiper area increased 35% compared to previous machine.)

Large ceiling cover

The ceiling cover can be opened to confirm the bucket operation even at the maximum excavating height. (Visual range increased by 25% compared to previous machine.)

Simplified operation mode selection

The 3 work modes from the previous models have been reduced to digging and trenching modes for easy selection. Digging Mode: General Excavating, Ground Leveling, Loading Dump Truck, allows for versatility. Trenching Mode: trenching or excavating of side wall, operations which require heavy swing work.

Performance

This hydraulic excavator is equipped with the air-to-air intercooler engine, which has the greatest power output in its class and excellent fuel economy. It assures outstanding workability, productivity, and efficiency through the e-EPOS system, the new and improved version of EPOS System. This will assure an increase in operating capacity and a decrease in fuel consumption.

Air to Air Intercooler Engine

Greatest power output and high-efficiency engine in its class. Environmentally friendly, Green engine. This machine is equipped with the engine meeting the U.S. EPA Tier-II Regulations and European stage-II Regulations requiring the reduction of harmful NOx, PM, HC, and CO emissions. Compatible with the European New Noise Control Requirements.

Heat Shield Panel for Turbo Charger

The heat shield guard has been installed over the turbo charger to prevent the operator from inadvertently touching the hot surfaces while checking the engine area.

Emergency Throttle Cable

In the event of engine speed control dial malfunction, the emergency throttle cable mounted in the cabin can be used to manually control engine speed.

Water separator

The transparent glass water separator is mounted at a location easily accessible from the ground allowing easy maintenance of the fuel system.

Easy radiator cleaning

The clearance between the oil cooler and radiator has been widened for easy insertion of the air nozzle during cleaning.

Filter / oil operating hour display

The hours in use for 9 filters and oils can be displayed so that replacement intervals can be easily recognized.

Others

Double element air cleaner Pre-cleaner Water separator Dust screen for radiator Engine overheat prevention system Engine restart prevention system Self-diagnostic system Alternator (24V, 50 amps) Electric horn Halogen working lights (frame mounted 2, boom mounted 2) Hydraulic track adjuster Track guards Piping for hammer (one way) Piping for rotation Double fuel filter Greased and sealed track link Additional work lights on the cabin (2 front lamps, 4 front and 2 rear lamps) Large capacity alternator (24V, 80A) Electric fuel supply pump

Rubber pipe clamps

Improved material pipe clamps have been installed. This has resulted in noise reduction, increased vibration absorption and durability characteristics as well as preventing pipe cracks.

Improved stability

The center of gravity has lowered and optimized by the strengthened undercarriage. These have greatly improved the dynamic stability and side lifting capacity.

Improved swing mechanism

Swing anti-rebound valve is installed as standard equipment, which allows the operator to stop the upper structure at the desired position. As a result, operating efficiency has been greatly improved.

Standard equipment

Hydraulic system Boom and arm flow regeneration Boom and arm holding valves Swing anti-rebound valves Spare ports (valve) One-touch power boost

Working Environment

Wide operator cabin space meeting the ISO Standards and expanded all-round visibility. The low-noise, low-vibration type comfortable cabin provides the operator with safe and ergonomic operating environment.

Increased Foot Space

Instruments, controls, and accessories have been ergonomically located in the cabin, and a 300mm seat slide has been achieved to provide ample space for the operator’s feet and legs.

Low Vibration Cab Mounting System

By using a total isolating seal design (full sealing), outside noise has been drastically reduced to levels comparable to those in a modern car. A viscous sealed mounting system has been incorporated, and the frame, cabin, and seat have been designed to absorb major and minor vibrations, resulting in a significant decrease in vibration felt by the operator.

Fresh Air Type Air Conditioner

One touch selector switch for the air conditioner and heater output, featuring a multi-vent circulation system that allows for greater cooling/heating performance. An improved front window defroster system has been added to provide enhanced clarity and visibility during any working condition.Easy replaceable air filter.Larger cool air intake vents.Industry standard fresh air/recirculation control system incorporated.Modular electric fan condenser compartment.

Optional equipment

Safety Boom and arm hose rupture protection valve Overload warning device Cabin Top/Front guard (ISO 10262, FOGS standard) Travel alarm Travel & swing alarm Rotating beacon