Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.
| Weight | 2.7 t |
|---|---|
| Rated operating capacity | 703 kg |
| Standard tyres | 10x16.5 |
| Bucket capacity | 0.4 m³ |
| Transport length | 3.12 m |
| Transport width | 1.56 m |
| Transport height | 1.96 m |
| Travel speed | 11,2 km/h |
| Engine manuf. | Yanmar |
| Engine type | 4TNE88 |
| Engine power | 37 kW |
| Track width | ### |
| Bucket width | ### |
| Driver protection | ### |
| Steering mode | ### |
| Max. discharge height | ### |
| Lifting force | ### |
| Engine power | ### |
| Dimension lxwxh | ### |
| Displacement | ### |
| Revolutions at max torque | ### |
| Max. torque | ### |
| No. of cylinders | ### |
| Cylinder bore x stroke | ### |
| Weight | ### |
| Emission level | ### |
| Access | ### |
| Engine Manufacturer | ### |
| Engine Model | ### |
| Aspiration | ### |
| Rated Speed | ### |
| Engine Output - Net | ### |
| Transmission Type | ### |
| Length - No Bucket | ### |
| Length - With Bucket Foundry | ### |
| Width - No Bucket | ### |
| Width - Bucket Foundry | ### |
| Height - Top Of Cab | ### |
| Ground Clearance | ### |
| Wheelbase | ### |
| Rear Departure Angle | ### |
| Height to Hinge Pin | ### |
| Dump Angle | ### |
| Dump Height - Maximum Foundry | ### |
| Reach - Max Dump Height Foundry | ### |
| Turning Radius - Rear Corner | ### |
| Turning Radius - Bucket Corner Foundry | ### |
| Rated Operating Capacity - Foundry | ### |
| Tipping Load - Foundry | ### |
| Speed - Maximum | ### |
| Breakout - Lift Foundry | ### |
| Breakout - Bucket Foundry | ### |
| Pump Type | ### |
| Pump Flow | ### |
| System Pressure | ### |
| Operating Weight - Foundry | ### |
Basic model with ROPS cabin and std. shovel with teeth
Receive the best purchase offer² within 48 hours¹ from the network of WeBuyHeavyMachines.com with over 1,000 international dealers.
2.7t
703 kg
10x16.5
Check out 4 Mustang products here
.jpg)
A fleet of Doosan excavators working with large breakers has been used by the company, Excavaciones Gaby, to clear space for a new site for building work in the centre of the city of Santander in Spain.
