299C Caterpillar 299C Specifications & Technical Data (2009—2015)

The Caterpillar 299C is a skid steer loader manufactured by Caterpillar from 2009 to 2015. It has a weight of 5.12 tons and a buck…

The Caterpillar 299C is a skid steer loader manufactured by Caterpillar from 2009 to 2015. It has a weight of 5.12 tons and a bucket capacity of 0.63 cubic meters. The bucket width is 2.134 meters, and it has a travel speed of 14 km/h. The track width is 460 mm, and it has a rated operating capacity of 1882 kg.

Skid Steer Loaders Caterpillar 299C

Technical specs - 299C Caterpillar

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Weight
5.12 t
Rated operating capacity
1882 kg
Track width
460 mm
Bucket width
2.134 m
Bucket capacity
0.63 m³
Driver protection
Ü
Steering mode
AL
Travel speed
14 km/h
Engine manuf.
Caterpillar
Engine type
C3.4 T
Engine power
67 kW
Displacement
3.4 l
Revolutions at max torque
2500 rpm

More technical details, like: standard tyres, transport length, transport width, transport height, max. discharge height, lifting force, model series, dimension lxwxh, max. torque, no. of cylinders, cylinder bore x stroke, emission level...

More technical details, like: standard tyres, transport length, transport width, transport height, max. discharge height, lifting force, model series, dimension lxwxh, max. torque, no. of cylinders, cylinder bore x stroke, emission level, undercarriage type, lift geometry, access, suspension seat, engine manufacturer, engine model, emission rating, number of cylinders, aspiration, rated speed, engine output - net, engine output - gross, torque, transmission type, drive method, track rollers, length - no bucket, length - with bucket, width - no bucket, height - top of cab, ground clearance, track length on ground, height to hinge pin, dump angle, dump height - maximum, reach - max dump height, turning radius - rear corner, turning radius - bucket corner, fuel tank, tipping load, operating capacity, ground bearing pressure, speed - maximum, breakout - bucket, hydraulic power, hydraulic power - option, pump flow, pump flow - option, operating weight are available in the full technical specs.

Basic model with ROPS cabin and std. shovel with teeth

Special equipment

Diesel particulate filter
No
LPG motor
No
Burglar proof system
No

Download specalog and datasheets (PDF)

Caterpillar 299C FAQ

When was the Caterpillar 299C manufactured?

The Caterpillar 299C was manufactured from 2009 to 2015.

How much does the Caterpillar 299C skid steer loader weigh?

The Caterpillar 299C skid steer loader weighs 5.12 tons.

What is the travel speed of the Caterpillar 299C skid steer loader?

The Caterpillar 299C skid steer loader has a travel speed of 14 km/h.

What is the track width of the Caterpillar 299C skid steer loader?

The Caterpillar 299C skid steer loader has a track width of 460 mm.

What is the steering mode of the Caterpillar 299C skid steer loader?

The Caterpillar 299C skid steer loader has an all-wheel steering mode.

What is the material handling capacity of the Caterpillar 299C skid steer loader?

The Caterpillar 299C skid steer loader has a rated operating capacity of 1882 kg.

What are the specifications of the primary work tool bucket on the Caterpillar 299C skid steer loader?

The primary work tool bucket of the Caterpillar 299C has a capacity of 0.63 cubic meters and a width of 2.13 meters.

What operator safety features does the Caterpillar 299C skid steer loader have?

The Caterpillar 299C skid steer loader is equipped with a roll-over bar for driver protection.

How much is a Caterpillar 299C Skid steer loader (2009u20132015) worth?

The residual value of the Caterpillar 299C depends on the machine's individual parameters. Visit the LECTURA Valuation to check it.

Machine inspection

Ask for inspection of your Caterpillar 299C from experts

Machine inspection

Mevas is an international operating inspection service for used heavy machinery. Construction machinery inspectors are available in more than 20 countries.

Use this service to minimise the risk when buying used equipment. An inspection by Mevas costs less than repairing a defective hydraulic cylinder.

Enquire machine inspection

Provided by: Mevas — The Heavy Equipment Inspectors

Buy & Rent

Compare Caterpillar 299C with similar Skid Steer Loaders

Caterpillar 299C

Caterpillar 299C

Weight:
5.12 t
Rated operating capacity:
1882 kg
Track width:
460 mm
Bucket width:
2.134 m
Develon DTL35

Develon DTL35

Weight:
5.799 t
Rated operating capacity:
1.727 kg
Track width:
400 mm
Bucket width:
2.032 m

Do you want to see more detailed comparison?

Show me!

Sell Caterpillar 299C

Skid Steer Loaders appraisal with LECTURA Valuation

Valuation

Whether you need to get value of your Caterpillar 299C or valuation of your Skid Steer Loaders fleet, LECTURA Valuation will help. Simply fill the machine details and see the values for Skid Steer Loaders in few clicks.

Valuate right now!

Data provided by Lectura logo

Spare parts & Components

Get spare parts for Caterpillar 299C easily from our partners

Spare parts

Do your lookup for high quality parts for Caterpillar 299C online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Skid Steer Loaders spare parts easily today - worldwide.

Get parts for Caterpillar 299C now!

Transport

Skid Steer Loaders Transport & Shipping Services

In case you want a transport for your machine, take advantage of our services. Query the ideal transport quotes for Skid Steer Loaders built on dimensions and weight. Our partners provide major services to meet your demands.

Ask for transport price

Data provided by Lectura logo

News