Manufacturer

    All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Construction machinery Crawler Excavators Crawler Excavators Komatsu Komatsu PC210LCi-11E0 specifications

    Technical specs - PC210LCi-11E0 Komatsu

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    Weight 23.60 t
    Transport length 9.62 m
    Transport width 3.18 m
    Transport height 3.18 m
    Bucket capacity 1.2 m³
    Undercarriage LC
    Track width 600 mm
    Boom MB
    Max. Reach horizontal 9.87 m
    Dredging depth 6.62 m
    Tear-out force 149 kN
    Bucket width 1.22 m
    Engine manuf. Komatsu
    Engine type SAA6D107E-2
    Engine power 118 kW
    Engine power 158 HP
    Displacement 6.69 l
    Revolutions at max torque 2000 rpm
    No. of cylinders 6
    Cylinder bore x stroke 107×124 mm
    Emission level IV
    Bucket capacity min. ###
    Bucket capacity max. ###
    Dimension lxwxh ###
    Max. torque ###
    Weight ###

    Basic model incl. ROPS cabin, traction drive, standard boom and standard bucket

    PC210LCi-11E0 Komatsu - Special equipment

    • Diesel particulate filter
    • Track adaption
    • Blade
    • Cabin adjustment
    • Overload alert
    • Material Handling Excavator
    • Aircondition
    • Quick hitch hydr.
    • Quick hitch mech.

    Download data sheets - Komatsu PC210LCi-11E0

    What Komatsu says about this machine

    • What are the key characteristics of this model?

      The intelligent machine control that was considered in the machine design, is fully integrated and installed in the factory. It is also fully covered by the factory warranty. Added to this is the robust sensor system, which also allows underwater work. The machine also has an auto-tilt bucket and Tier V compliant motors.

    • What type of job is the machine best suited to do?

      The machine can be used like a "standard" excavator without any restrictions, but is ideally suited for formation work. This starts with simple peeling work, but shows its full potential with complex landscape profiles.

    • Can you name features that differentiates this machine from others?

      The factory-installed intelligent machine control fully integrated into the machine, which enables the excavator to carry out construction tasks automatically and with the highest precision. At the operator's command, the spoon follows the stored target design and leaves an acceptable level. The operator should not be patronized, however, and is therefore always able to intervene.

    • What type of companies is this machine designed for?

      The primary development goal was to relieve the driver of his work. The full machine potential is shown by companies that are instructed to create surfaces and profiles quickly, cost-effectively and precisely. This begins with gardeners and landscapers and ends with the large corporation, which operates across Europe.

    X

    What do you think about this machine?

    Sell your Komatsu PC210LCi-11E0 for a good price

    Receive the best purchase offer² within 48 hours¹ from the network of WeBuyHeavyMachines.com with over 1,000 international dealers.

    Compare Komatsu PC210LCi-11E0 with other models

    Press 1 image

    Komatsu PC210LCi-11E0

    23.6t

    9.62 m

    3.18 m

    Komatsu products

    Check out 25 Komatsu products here

    More about Komatsu

    Visit Komatsu at