Manufacturer

    All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts Telehandlers Telehandlers Merlo Merlo MF 34.7 CS specifications

    Merlo MF 34.7 CS Specifications & Technical Data (2019-2021)

    Rate this machine now!

    Nominal load at COG: 3.4t – Standard tyres: 460/70-R24 – Centre of gravity: 500mm – Transmission type: HY – Max. Reach horizontal: 3.8m – Capacity at full forward reach: 1.7t

    Total Cost of Ownership for 3-4t Telehandlers

    BUY (Annual Ownership Cost): 16 730.79 € RENTAL COST (Annual Rental Cost): 15 521.03 €.

    Customize the calculation *Presented prices are sample calculations.

    Provided by

    Technical specs - MF 34.7 CS Merlo

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    Nominal load at COG 3.4 t
    Standard tyres 460/70-R24
    Centre of gravity 500 mm
    Transmission type HY
    Max. Reach horizontal 3.8 m
    Capacity at full forward reach 1.7 t
    Lifting height 6.8 m
    Capacity at full lift hight 3.4 t
    Weight 7.5 t
    Transport length 5.44 m
    Transport width 2.24 m
    Transport height 2.485 m
    Travel speed 40 km/h
    max. climbing ability 45 %
    Engine manuf. Deutz
    Engine type TCD3.6 L4
    Engine power 100 kW
    Engine power 136 HP
    Dimension lxwxh 701x592x790 mm
    Displacement 3.6 l
    Revolutions at max torque 1600 rpm
    Max. torque 480 Nm
    No. of cylinders 4
    Cylinder bore x stroke 98x120 mm
    Weight 350 kg
    Emission level IV Final

    All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

    MF 34.7 CS Merlo - Special equipment

    • Diesel particulate filter
    • StVZO Equipment
    • Inclination correction
    • Side displacement

    RAVAS iForks-32 weight scaling solution for your Merlo MF 34.7 CS

    RAVAS iForks-32

    Successful RAVAS scale forks

    Fit iForks for your Merlo MF 34.7 CS and realise immediate cost savings

    Functions:

    Gross/net weighing

    Totalling with sequence number

    Weight data transfer to smart phone, tablet, handheld and WMS/ERP system

    Benefits:

    Installation within 5 minutes

    Completely wireless with digital calibration

    More information

    Download data sheets - Merlo MF 34.7 CS

    X

    What do you think about this machine?


    Compare Merlo MF 34.7 CS with other models

    Press 1 image

    Merlo MF 34.7 CS

    3.4t

    460/70-R24

    500 mm

    Merlo products

    Check out 2 Merlo products here

    More about Merlo

    Visit Merlo at