.jpg)
Beside the need of getting work done with the appropriate machines and equipment as simply and economically as possible, the current focus in agriculture is also on the protection of the environment and climate.
New Holland LM 410 telehandler specs (1998 - 2004)
The LM 410 telehandler model is manufactured by New Holland. Find and download detailed specs and data sheets for this machine her... Read more
The LM 410 telehandler model is manufactured by New Holland. Find and download detailed specs and data sheets for this machine here.
This telehandler is built to provide up to 78kW or 104 horse power, delivered from its powerful Iveco engine to the 6.45t LM 410 machine. The LM 410 is categorised in the smallest machine segment in the telehandlers category. 17.5 LR 24 is the size of standard tyres equipped on this New Holland LM 410 telehandler. Max. Horizontal reach of this LM 410 model from New Holland is 3.33m. With a center of gravity of 500mm, this model can lift a nominal load of 2.8t. This telehandler from New Holland is able to work with 2.8t capacity at up to 6m height. The capacity of this model at full forward reach is 1.6t.
Side displacement, Diesel particulate filter and Inclination correction are not provided on this model as of 2004. Find detailed specifications and machine details in the original New Holland LM 410 datasheet.
The production stopped in 2004, where this LM 410 was available at a new list price between €48,000 and €61,000. For more detailed information about pricing and current residual values, check out the LECTURA Valuation system.
Based on other telehandlers specifications and pricing variations, the New Holland LM 410 can be considered similar to the Manitou MLT 526 Compact T, Teletrac 627 T and Manitou MT 728-2. At present, 5 other telehandlers, which range from 3.2t up to 4.2t are produced by New Holland. Of these, LM 6.32, LM 7.35 and also LM 7.42 Elite are the most frequently visited on LECTURA Specs. Want more detailed specifications? Download the latest New Holland LM 410 specs data sheet on LECTURA Specs today!
Technical specs - LM 410 New Holland
Specification
Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur.Contact our team with any change suggestion.
- Nominal load at COG 2.8 t
- Standard tyres 17.5 LR 24
- Centre of gravity 500 mm
- Transmission type W
- Max. Reach horizontal 3.33 m
- Capacity at full forward reach 1.6 t
- Lifting height 6 m
- Capacity at full lift height 2.8 t
- Weight 6.45 t
- Engine manuf. Iveco
- Engine type 8045.25
- Engine power 78 kW
More technical details, like: model series, transport length, transport width, transport height, travel speed , max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load...
Show moreAll specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel
Special equipment
- Diesel particulate filter
- StVZO Equipment
- Inclination correction
- Side displacement
Carbon footprint calculator for Telehandlers
See the ERA equipment CO2 Calculator to estimate the CO2 footprint per hour of use of the New Holland LM 410 or other Telehandlers.
The footprint calculation can be carried out considering different energy consumption scenarios or other variables.
or go to the ERA Equipment CO2 Calculator to find out how to optimise your carbon footprint.
service provided by
Buy & Rent
Used New Holland Telehandlers for sale
LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.
Get in touch for more details:
Total Cost of Ownership for 3-4t Telehandlers
Find out if rental works for you:
Ownership cost (annual): 16730.79 EUR
Rental cost (annual): 15521.03 EUR
You can save 8 % by renting a telehandlers
*Presented prices are sample calculations.
Customize the calculation
service provided by
Compare New Holland LM 410 with similar Telehandlers
.jpg)
New Holland LM 410
Nominal load at COG: 2.8 t
Standard tyres: 17.5 LR 24
Centre of gravity: 500 mm
Transmission type: W
New Holland LM 410
Nominal load at COG: 2.8 t
Standard tyres: 17.5 LR 24
Centre of gravity: 500 mm
Transmission type: W
.png)
Bobcat T 2556
Nominal load at COG: 2.5 t
Standard tyres: 400/70x20
Centre of gravity: 500 mm
Transmission type: HY
Case IH Farmlift 525 Basis
Nominal load at COG: 2.5 t
Standard tyres: 12x18
Centre of gravity: 500 mm
Transmission type: HY
Massey Ferguson MF 8925
Nominal load at COG: 2.5 t
Standard tyres: 400/70-20
Centre of gravity: 500 mm
Transmission type: Hy
Spare parts & Components
Get spare parts for New Holland LM 410 easily from our partners
Inquire the spare part you search for from our partners with a few easy steps and choose the best offer. Wether you are a dealer or end user, LECTURA can navigate you to the right direction. Order the Telehandlers spare parts easily today - worldwide.
Events & News
Material Handling News by LECTURA 27.09.2023
.jpg)
TOBROCO-GIANT offers great variety of models at AGRITECHNICA
X
What do you think about this machine?
New Holland products
Check out 38 New Holland products here