3707 PS JLG Telehandler Specs & Dimensions (2013 - 2017)

The JLG 3707 PS telehandler, manufactured from 2013 to 2017, has a weight of 8.3 tons and a transport length of 5.15 meters. It ha…

The JLG 3707 PS telehandler, manufactured from 2013 to 2017, has a weight of 8.3 tons and a transport length of 5.15 meters. It has a nominal load at the center of gravity of 3.7 tons and a lifting height of 7.3 meters. The telehandler has a capacity of 1.5 tons at full forward reach and at full lift height. It has a center of gravity at 500 millimeters. The transport width and height are both 2.38 meters. The telehandler is equipped with StVZO equipment.

Technical specs - 3707 PS JLG

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG
3.7 t
Model series
PS
Centre of gravity
500 mm
Standard tyres
400/80-24
Transmission type
W
Max. Reach horizontal
3.8 m
Capacity at full forward reach
1.5 t
Lifting height
7.3 m
Capacity at full lift height
1.5 t
Weight
8.3 t
Transport length
5.15 m
Transport width
2.38 m
Transport height
2.38 m
Travel speed
40 km/h
max. climbing ability
51 %
Engine manuf.
Deutz
Engine type
TCD3.6 L4
Engine power
74 kW
Displacement
3.6 l
Revolutions at max torque
1600 rpm
No. of cylinders
4
Emission level
V/Tier 4 f

More technical details, like: drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, max. torque, cylinder bore x stroke, cab position, chassis type...

More technical details, like: drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, max. torque, cylinder bore x stroke, cab position, chassis type, levelling - chassis, stabilisers, drive - 2w / 4w, transmission type, telematics available, engine manufacturer, engine model, emission rating, aspiration, engine output - gross, torque, tyre - front size, tyre 2 - front size option, service brake - type, service brake - location, dimension configuration, length - front of carriage, height - over cab, width - operating, wheelbase, ground clearance, boom angle - maximum, lift height - maximum, reach - maximum, reach - at maximum lift height, reach - ground with maximum capacity, unstabilised lift height - with maximum capacity, turning radius - over tyres, breakout force, lift capacity - maximum, lift capacity - to max height, lift capacity - to max reach, unstabilised lift capacity - maximum, unstabilised lift capacity - to max height, unstabilised lift capacity - to max reach, fuel tank, number of boom sections, load centre, lift capacity - fork maximum, raise time - boom, extend time - boom, speed - forward maximum, operating weight are available in the full technical specs.

All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

Special equipment

Diesel particulate filter
No
StVZO Equipment
Yes
Inclination correction
No
Side displacement
No

Download datasheets (PDF)

Buy & Rent

Used JLG Telehandlers for sale

LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.

Get in touch for more details:

Compare JLG 3707 PS with similar Telehandlers

JLG 3707 PS

JLG 3707 PS

Nominal load at COG:
3.7 t
Model series:
PS
Centre of gravity:
500 mm
Standard tyres:
400/80-24
Komatsu WH609

Komatsu WH609

Nominal load at COG:
3.5 t
Model series:
WH
Centre of gravity:
500 mm
Standard tyres:
405/70-24 PR14
Merlo TF 33.9 CS-120

Merlo TF 33.9 CS-120

Nominal load at COG:
3.3 t
Model series:
TF
Centre of gravity:
500 mm
Standard tyres:
405/70 R24 14 PR
Caterpillar TH 82

Caterpillar TH 82

Nominal load at COG:
4 t
Model series:
TH
Centre of gravity:
500 mm
Standard tyres:
15.5-25
Haulotte HTL4014

Haulotte HTL4014

Nominal load at COG:
4 t
Model series:
HTL
Centre of gravity:
500 mm
Standard tyres:
400/80-24

Do you want to see more detailed comparison?

Show me!

Sell JLG 3707 PS

Telehandlers appraisal with LECTURA Valuation

Valuation

Whether you need to know price of your JLG 3707 PS or valuation of your Telehandlers fleet, LECTURA Valuation will help. Simply fill the machine details and see the values for Telehandlers in few clicks.

Data provided by Lectura logo

Spare parts & Components

Get spare parts for JLG 3707 PS easily from our partners

Spare parts

Do your lookup for high quality parts for JLG 3707 PS online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Telehandlers spare parts easily today - worldwide.

Transport

Telehandlers Transport & Shipping Services

In case you want to transport your machine, utilise our services. Check the ideal transport quotes for Telehandlers built on transport dimensions and machine weight. Our partners offer extensive services to meet your demands.

Data provided by Lectura logo

News