3507 H JLG Telehandler Specs & Dimensions (2009 - 2015)

The JLG 3507 H telehandler, manufactured from 2009 to 2015, has a weight of 7.4 tons and a transport length of 5.02 meters. It has…

The JLG 3507 H telehandler, manufactured from 2009 to 2015, has a weight of 7.4 tons and a transport length of 5.02 meters. It has a nominal load at the center of gravity of 3.5 tons and a lifting height of 6.9 meters. The telehandler has a capacity of 1.35 tons at full forward reach and a capacity of 2.6 tons at full lift height. It has a transport width of 2.33 meters and a transport height of 2.45 meters. The special equipment included is the StVZO Equipment.

Technical specs - 3507 H JLG

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG
3.5 t
Model series
H
Centre of gravity
500 mm
Standard tyres
405/70-24
Transmission type
Hy
Max. Reach horizontal
3.9 m
Capacity at full forward reach
1.35 t
Lifting height
6.9 m
Capacity at full lift height
2.6 t
Weight
7.4 t
Transport length
5.02 m
Transport width
2.33 m
Transport height
2.45 m
Travel speed
35 km/h
max. climbing ability
45 %
Engine manuf.
Deutz
Engine type
TCD2012
Engine power
74.9 kW
Displacement
4.038 l
Revolutions at max torque
2100 rpm

More technical details, like: drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, max. torque, no. of cylinders, cylinder bore x stroke, emission level...

More technical details, like: drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, max. torque, no. of cylinders, cylinder bore x stroke, emission level, cab position, chassis type, stabilisers, drive - 2w / 4w, transmission type, telematics available, engine manufacturer, engine model, emission rating, aspiration, engine output - gross, tyre - front size, tyre - rear size, service brake - type, dimension configuration, length - at ground, length - front of carriage, height - over cab, width - operating, wheelbase, ground clearance, width - cab, boom angle - maximum, lift height - maximum, reach - maximum, reach - at maximum lift height, reach - ground with maximum capacity, unstabilised lift height - with maximum capacity, turning radius - over tyres, breakout force, lift capacity - maximum, lift capacity - to max height, lift capacity - to max reach, unstabilised lift capacity - maximum, unstabilised lift capacity - to max height, unstabilised lift capacity - to max reach, fuel tank, number of boom sections, load centre, lift capacity - fork maximum, raise time - boom, extend time - boom, speed - forward maximum, speed - reverse maximum, operating weight are available in the full technical specs.

All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

Special equipment

Diesel particulate filter
No
StVZO Equipment
Yes
Inclination correction
No
Side displacement
No

Download datasheets (PDF)

Buy & Rent

Used JLG Telehandlers for sale

LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.

Get in touch for more details:

Compare JLG 3507 H with similar Telehandlers

JLG 3507 H

JLG 3507 H

Nominal load at COG:
3.5 t
Model series:
H
Centre of gravity:
500 mm
Standard tyres:
405/70-24
Komatsu WH609

Komatsu WH609

Nominal load at COG:
3.5 t
Model series:
WH
Centre of gravity:
500 mm
Standard tyres:
405/70-24 PR14
Merlo TF 33.9 CS-120

Merlo TF 33.9 CS-120

Nominal load at COG:
3.3 t
Model series:
TF
Centre of gravity:
500 mm
Standard tyres:
405/70 R24 14 PR
Caterpillar TH 82

Caterpillar TH 82

Nominal load at COG:
4 t
Model series:
TH
Centre of gravity:
500 mm
Standard tyres:
15.5-25
Haulotte HTL4014

Haulotte HTL4014

Nominal load at COG:
4 t
Model series:
HTL
Centre of gravity:
500 mm
Standard tyres:
400/80-24

Do you want to see more detailed comparison?

Show me!

Sell JLG 3507 H

Telehandlers appraisal with LECTURA Valuation

Valuation

Whether you need to get value of your JLG 3507 H or valuation of your Telehandlers fleet, LECTURA Valuation will help. Simply fill the machine details and see the values for Telehandlers in few clicks.

Data provided by Lectura logo

Spare parts & Components

Get spare parts for JLG 3507 H easily from our partners

Spare parts

Do your lookup for high quality parts for JLG 3507 H online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Telehandlers spare parts easily today - worldwide.

Transport

Telehandlers Transport & Shipping Services

In case you look into transport options for your machine, take advantage of our services. Search for the ideal transport quotes for Telehandlers built on dimensions and weight. Our partners provide major options to meet your demands.

Data provided by Lectura logo

News

Material Handling News by LECTURA 21.06.2026