540-140 JCB Telehandler Specs & Dimensions (2004 - 2008)

The JCB 540-140 is a telehandler manufactured by JCB from 2004 to 2008. It weighs 10.86 tons and has a nominal load at the center …

The JCB 540-140 is a telehandler manufactured by JCB from 2004 to 2008. It weighs 10.86 tons and has a nominal load at the center of gravity of 4 tons. The lifting height of this telehandler is 14 meters. It has a capacity of 1.25 tons at full forward reach and a capacity of 4 tons at full lift height. The center of gravity is located at 500 millimeters.

Telehandlers JCB 540-140

Visit JCB live at

Technical specs - 540-140 JCB

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG
4 t
Model series
540
Centre of gravity
500 mm
Standard tyres
15.5-25
Transmission type
W
Max. Reach horizontal
9.25 m
Capacity at full forward reach
1.25 t
Lifting height
14 m
Capacity at full lift height
4 t
Weight
10.86 t
Engine manuf.
Perkins
Engine type
1104T
Engine power
74.6 kW

More technical details, like: transport length, transport width, transport height, travel speed, max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load...

More technical details, like: transport length, transport width, transport height, travel speed, max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, displacement, revolutions at max torque, max. torque, no. of cylinders, cylinder bore x stroke, emission level, cab position, chassis type, levelling - chassis, stabilisers, drive - 2w / 4w, transmission type, attachment quickhitch, telematics available, platform, engine manufacturer, engine model, emission rating, aspiration, rated speed, engine output - gross, torque, tyre - front size, tyre - rear size, service brake - type, service brake - location, length - front of carriage, height - over cab, width - operating, wheelbase, ground clearance, width - cab, width - stabiliser spread, boom angle - maximum, lift height - maximum, reach - maximum, reach - at maximum lift height, reach - ground with maximum capacity, unstabilised lift height - with maximum capacity, stabilised lift height - with maximum capacity, turning radius - over tyres, lift capacity - maximum, lift capacity - to max height, lift capacity - to max reach, unstabilised lift capacity - maximum, unstabilised lift capacity - to max height, unstabilised lift capacity - to max reach, stabilised lift capacity - maximum, stabilised lift capacity - to max height, stabilised lift capacity - to max reach, number of boom sections, load centre, lift capacity - fork maximum, raise time - boom, extend time - boom, speed - forward maximum, speed - reverse maximum, operating weight are available in the full technical specs.

All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

Special equipment

Diesel particulate filter
No
StVZO Equipment
No
Inclination correction
No
Side displacement
No

Download datasheets (PDF)

Events

Visit JCB live at

Buy & Rent

Used JCB Telehandlers for sale

LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.

Get in touch for more details:

Used JCB Telehandlers for sale | Forklift-International
Go to the offers

Compare JCB 540-140 with similar Telehandlers

JCB 540-140

JCB 540-140

Nominal load at COG:
4 t
Model series:
540
Centre of gravity:
500 mm
Standard tyres:
15.5-25
Komatsu WH609

Komatsu WH609

Nominal load at COG:
3.5 t
Model series:
WH
Centre of gravity:
500 mm
Standard tyres:
405/70-24 PR14
Merlo TF 33.9 CS-120

Merlo TF 33.9 CS-120

Nominal load at COG:
3.3 t
Model series:
TF
Centre of gravity:
500 mm
Standard tyres:
405/70 R24 14 PR
Sennebogen 305 XL

Sennebogen 305 XL

Nominal load at COG:
4.5 t
Model series:
XL
Centre of gravity:
600 mm
Standard tyres:
405/70 R10
Caterpillar TH 82

Caterpillar TH 82

Nominal load at COG:
4 t
Model series:
TH
Centre of gravity:
500 mm
Standard tyres:
15.5-25

Do you want to see more detailed comparison?

Show me!

Sell JCB 540-140

Telehandlers appraisal with LECTURA Valuation

Valuation

Whether you need to get value of your JCB 540-140 or valuation of your Telehandlers fleet, LECTURA Valuation will help. Simply fill the machine information and see the values for Telehandlers in few clicks.

Valuate right now!

Data provided by Lectura logo

Spare parts & Components

Get spare parts for JCB 540-140 easily from our partners

Spare parts

Do your lookup for high quality parts for JCB 540-140 online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Telehandlers spare parts easily today - worldwide.

Get parts for JCB 540-140 now!

Transport

Telehandlers Transport & Shipping Services

In case you look into transport options for your machine, take advantage of our services. Search for favourable transport quotes for Telehandlers built on machine's dimensions and weight. Our partners provide various options to fit your demands.

Ask for transport price

Data provided by Lectura logo

News

Material Handling News by LECTURA 16.06.2026

More industry news