Runner 40.13-85 Dieci Telehandler Specs & Dimensions (2006 - 2017)

Name: Dieci Runner 40.13-85 Telehandlers
Brand: Dieci

The Dieci Runner 40.13-85 is a telehandler manufactured by Dieci from 2006 to 2017. It weighs 10.2 tons and has a transport length…

The Dieci Runner 40.13-85 is a telehandler manufactured by Dieci from 2006 to 2017. It weighs 10.2 tons and has a transport length of 5.56 meters. The telehandler has a nominal load capacity of 4 tons at the center of gravity and can lift loads up to a height of 12.1 meters. It has a capacity of 0.75 tons at full forward reach and 3 tons at full lift height. The center of gravity is located at 500 millimeters. The transport width is 2.31 meters and the transport height is 2.46 meters.

Runner 40.13-85

Years of manufacture: 2006—2017

Data sheet
Buy & Rent
Valuate & Sell
Spare parts
Transport
News

Technical specs - Runner 40.13-85 Dieci

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG: 4 t

Model series: Runner

Centre of gravity: 500 mm

Standard tyres: 405/70x20"

Transmission type: Hy

Max. Reach horizontal: 8.75 m

Capacity at full forward reach: 0.75 t

Lifting height: 12.1 m

Capacity at full lift height: 3 t

Weight: 10.2 t

Transport length: 5.56 m

Transport width: 2.31 m

Transport height: 2.46 m

Travel speed: 30 km/h

max. climbing ability: 40 %

Engine manuf.: FPT

Engine type: F 4 GE 0454 A

Engine power: 85 kW

More technical details, like: drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, displacement, revolutions at max torque, max. torque, no. of cylinders, cylinder bore x stroke, emission level, cab position, chassis type, levelling - chassis, stabilisers, transmission type, telematics available, engine manufacturer, aspiration, rated speed, engine output - net, tyre - front size, tyre - rear size, service brake - type, dimension configuration, length - front of carriage, height - over cab, width - operating, wheelbase, ground clearance, width - cab, width - stabiliser spread, lift height - maximum, reach - maximum, unstabilised lift height - with maximum capacity, stabilised lift height - with maximum capacity, turning radius - over tyres, breakout force, lift capacity - maximum, lift capacity - to max height, lift capacity - to max reach, unstabilised lift capacity - maximum, unstabilised lift capacity - to max height, unstabilised lift capacity - to max reach, stabilised lift capacity - maximum, stabilised lift capacity - to max height, stabilised lift capacity - to max reach, fuel tank, number of boom sections, load centre, lift capacity - fork maximum, raise time - boom, extend time - boom, speed - forward maximum, operating weight are available in the full technical specs.

All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

Special equipment

Diesel particulate filter: No
StVZO Equipment: No
Inclination correction: No
Side displacement: No

Download datasheets (PDF)

Buy & Rent

Used Dieci Telehandlers for sale

LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.

Get in touch for more details:

Go to the offers

Compare Dieci Runner 40.13-85 with similar Telehandlers

Dieci Runner 40.13-85

Nominal load at COG:: 4 t

Model series:: Runner

Centre of gravity:: 500 mm

Standard tyres:: 405/70x20"

Komatsu WH609

Nominal load at COG:: 3.5 t

Model series:: WH

Centre of gravity:: 500 mm

Standard tyres:: 405/70-24 PR14

Merlo TF 33.9 CS-120

Nominal load at COG:: 3.3 t

Model series:: TF

Centre of gravity:: 500 mm

Standard tyres:: 405/70 R24 14 PR

Sennebogen 305 XL

Nominal load at COG:: 4.5 t

Model series:: XL

Centre of gravity:: 600 mm

Standard tyres:: 405/70 R10

Caterpillar TH 82

Nominal load at COG:: 4 t

Model series:: TH

Centre of gravity:: 500 mm

Standard tyres:: 15.5-25

Do you want to see more detailed comparison?

Show me!

Sell Dieci Runner 40.13-85

Telehandlers appraisal with LECTURA Valuation

Whether you need to calculate value of your Dieci Runner 40.13-85 or valuation of your Telehandlers fleet, LECTURA Valuation will help. Simply fill the form and see the pricing information for Telehandlers in few clicks.

Valuate right now!

Data provided by

Spare parts & Components

Get spare parts for Dieci Runner 40.13-85 easily from our partners

Do your lookup for high quality parts for Dieci Runner 40.13-85 online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Telehandlers spare parts easily today - worldwide.

Get parts for Dieci Runner 40.13-85 now!

Transport

Telehandlers Transport & Shipping Services

In case you look for a transport your machine, apply our services. Seek for the best fitting transport quotes for Telehandlers created on transport dimensions and weight. Our partners provide comprehensive services to satisfy your requirements.

Ask for transport price

Data provided by

News

Material Handling News by LECTURA 19.06.2026