Runner 30.9 TA Dieci Telehandler Specs & Dimensions (2004 - 2012)

The Dieci Runner 30.9 TA is a telehandler manufactured by Dieci from 2004 to 2012. It weighs 8.3 tons and has a transport length o…

The Dieci Runner 30.9 TA is a telehandler manufactured by Dieci from 2004 to 2012. It weighs 8.3 tons and has a transport length of 5.4 meters. The telehandler has a nominal load capacity of 3 tons at the center of gravity and can lift loads up to a height of 8.8 meters. It has a capacity of 1.2 tons at full forward reach and 3 tons at full lift height. The center of gravity is located at 500 millimeters. The transport width is 2.31 meters and the transport height is 2.5 meters.

Telehandlers Dieci Runner 30.9 TA

Technical specs - Runner 30.9 TA Dieci

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG
3 t
Model series
Runner
Centre of gravity
500 mm
Standard tyres
16/70X20
Transmission type
Hy
Max. Reach horizontal
5.35 m
Capacity at full forward reach
1.2 t
Lifting height
8.8 m
Capacity at full lift height
3 t
Weight
8.3 t
Transport length
5.4 m
Transport width
2.31 m
Transport height
2.5 m
Travel speed
30 km/h
max. climbing ability
40 %
Engine manuf.
Iveco
Engine type
F4GE0484C
Engine power
94 kW

More technical details, like: drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, displacement, revolutions at max torque, max. torque, no. of cylinders...

More technical details, like: drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, displacement, revolutions at max torque, max. torque, no. of cylinders, cylinder bore x stroke, emission level, cab position, chassis type, levelling - chassis, stabilisers, drive - 2w / 4w, transmission type, engine manufacturer, engine model, emission rating, aspiration, rated speed, engine output - gross, tyre - front size, tyre - rear size, tyre 2 - front size option, tyre 2 - rear size option, service brake - type, service brake - location, length - front of carriage, height - over cab, width - operating, wheelbase, ground clearance, width - cab, lift height - maximum, reach - maximum, reach - at maximum lift height, unstabilised lift height - with maximum capacity, stabilised lift height - with maximum capacity, turning radius - over tyres, breakout force, lift capacity - maximum, lift capacity - to max height, lift capacity - to max reach, unstabilised lift capacity - maximum, unstabilised lift capacity - to max height, unstabilised lift capacity - to max reach, stabilised lift capacity - maximum, stabilised lift capacity - to max height, stabilised lift capacity - to max reach, fuel tank, number of boom sections, lift capacity - fork maximum, speed - forward maximum, operating weight are available in the full technical specs.

All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

Special equipment

Diesel particulate filter
No
StVZO Equipment
No
Inclination correction
No
Side displacement
No

Download datasheets (PDF)

Buy & Rent

Used Dieci Telehandlers for sale

LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.

Get in touch for more details:

Used Dieci Telehandlers for sale | Forklift-International
Go to the offers

Compare Dieci Runner 30.9 TA with similar Telehandlers

Dieci Runner 30.9 TA

Dieci Runner 30.9 TA

Nominal load at COG:
3 t
Model series:
Runner
Centre of gravity:
500 mm
Standard tyres:
16/70X20
Bobcat T 2556

Bobcat T 2556

Nominal load at COG:
2.5 t
Centre of gravity:
500 mm
Standard tyres:
400/70x20
New Holland LM 410

New Holland LM 410

Nominal load at COG:
2.8 t
Model series:
LM
Centre of gravity:
500 mm
Standard tyres:
17.5 LR 24
Komatsu WH609

Komatsu WH609

Nominal load at COG:
3.5 t
Model series:
WH
Centre of gravity:
500 mm
Standard tyres:
405/70-24 PR14
Massey Ferguson MF 8925

Massey Ferguson MF 8925

Nominal load at COG:
2.5 t
Model series:
8900
Centre of gravity:
500 mm
Standard tyres:
400/70-20

Do you want to see more detailed comparison?

Show me!

Sell Dieci Runner 30.9 TA

Telehandlers appraisal with LECTURA Valuation

Valuation

Whether you need to calculate value of your Dieci Runner 30.9 TA or valuation of your Telehandlers fleet, LECTURA Valuation will help. Simply fill the equipment details and see the pricing information for Telehandlers in few clicks.

Valuate right now!

Data provided by Lectura logo

Spare parts & Components

Get spare parts for Dieci Runner 30.9 TA easily from our partners

Spare parts

Do your lookup for high quality parts for Dieci Runner 30.9 TA online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Telehandlers spare parts easily today - worldwide.

Get parts for Dieci Runner 30.9 TA now!

Transport

Telehandlers Transport & Shipping Services

In case you look for a transport your machine, apply our services. Ask for the most appropriate transport quotes for Telehandlers created on transport dimensions and weights. Our partners provide large-scale options to satisfy your requirements.

Ask for transport price

Data provided by Lectura logo

News