GC15S-9 Doosan LPG Forklift Specs & Dimensions (2022 - 2026)

Nominal load at COG: 1.34t – Centre of gravity: 610mm – Standard tyres: 18 x 6 x 12.12/14 x 5 x 10 – Weight: 2.739t – Total width:…

Nominal load at COG: 1.34t – Centre of gravity: 610mm – Standard tyres: 18 x 6 x 12.12/14 x 5 x 10 – Weight: 2.739t – Total width: 940mm – Construction height: 2060mm

Doosan is the manufacturer of the GC15S-9 LPG forklift. The production years for this model are (2022 - 2026). Find here detailed specs for GC15S-9 LPG powered lift truck - in a form of table chart below and downloadable datasheet. Explore also the other forklift models produced by Doosan.

Technical specs - GC15S-9 Doosan

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG
1.34 t
Centre of gravity
610 mm
Standard tyres
18 x 6 x 12.12/14 x 5 x 10
Weight
2.739 t
Total width
940 mm
Construction height
2060 mm
Turning radius
1.826 m
Lifting height
3 m
Travel speed with / without load
17.8/17.8 km/h
Hoisting with / without load
0.64/0.66 m/s
Lowering with load
0.51 m/s
Model series
GC 9
Engine manuf.
PSI
Engine type
4G63
Engine power
37.7 kW
Displacement
2 l
Revolutions at max torque
1800 rpm
Max. torque
148.7 Nm
No. of cylinders
4

More technical details, like: transmission type, max. climbing ability, dimension lxwxh, cylinder bore x stroke, emission level are available in the full technical specs.

L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulics with Simplex mast (3,3m up to 10t • 5m > 10t load capacity)

Download datasheets (PDF)

Doosan GC15S-9 overview

Doosan GC15S-9 features overview

Packed with Features

The new 9 Series from Doosan continues our tradition of delivering heavy duty performance with low cost of ownership.


Fewer Recommended Service Intervals

Superior components and intelligent engineering allow these trucks to operate longer between recommended service intervals. This means increased run time and lower cost of ownership.


Drive

Ergonomic Steering Column

The telescopic steering column allows the operator to properly adjust for comfort. The steering wheel is sized for reduced operator fatigue.


Optimized Cooling System

Larger radiator offers increased cooling capacity. Structural design of the radiator fan maximizes airflow. Larger hydraulic reservoir helps dissipate engine heat. Greater cooling capacity equals increased versatility.


Heavy Duty Hydrostatic Steer Axle

No mechanical connections between steering wheel and steer axle. Low effort steering for operator comfort and reduced fatigue. Quick steering response for increased maneuverability and safety. Grease fittings on king pin and steer linkage for easy maintenance. Shock absorbing steer axle bushings extend service life.


Performance

The 9 Series

Power, performance, driving comfort, durability, and outstanding fuel efficiency are just a few reasons to choose 'The 9 Series'.


Productivity

Discs are submerged in oil, keeping them cool and limiting wear. 100% of friction material is used for superior stopping power. OCDB are more easily serviced in the field than traditional brakes. System is sealed for maximum protection against contamination.


Safety

New Instrument Panel

The full sized LED instrument panel is conveniently located to remain in full view of the operator at all times.


Safety Features

Doosan understands the importance you place on safety. That's why the 9 Series offers a large array of standard safety features.


Operator Sensing System - (OSS)

Should the operator not be seated, OSS automatically prohibits operations such as: Truck movement Lift, lower, tilt functions Seat belt warning light reminds the operator to fasten belt Directional lever must be in the neutral position to start the truck


Improved Visibility

The 9 series LP forklifts have hydraulic hoses and mast chains strategically placed for wide forward visibility. This is crucial for safe operation and increased productivity.


Rear Grab Handle w/ Horn

Allows the operator to sound the horn and still remain in control when traveling in reverse. The grab bar is placed so that the operator's hand is always inside the safety guard.


Cabin & Equipment

Excellent Serviceability

Daily safety and routine maintenance checks are easy thanks to logical placement of commonly checked items. Doosan maximizes run time.


Easy to access service areas

The engine cover opens extra wide to offer great access. Spring lock enabled for safety and convenience. Performing general maintenance is easy. Toolless floor plates provide easy access.


Well-positioned components make service a breeze

Air filter service display on dashboard for fast servicing. Easily accessed maintenance-related components. Centralized fuse & relay access.


Well-placed LED display keeps operators informed

Continuous monitoring of all vital systems. Service error codes on dashboard display. Easy to read large LED display.


Buy & Rent

Used Doosan LPG Forklifts for sale

We analyze attractive deals from many sources about LPG Forklifts.
Find current offers on often visited classified websites presenting second hand LPG Forklifts to buy in many countries.

Get in touch for more details:

Compare Doosan GC15S-9 with similar LPG Forklifts

Doosan GC15S-9

Doosan GC15S-9

Nominal load at COG:
1.34 t
Centre of gravity:
610 mm
Standard tyres:
18 x 6 x 12.12/14 x 5 x 10
Weight:
2.739 t
Yale GLP 16 AF

Yale GLP 16 AF

Nominal load at COG:
1.6 t
Centre of gravity:
500 mm
Standard tyres:
SE 4
Weight:
2.76 t
TCM FG 15 N 16 T

TCM FG 15 N 16 T

Nominal load at COG:
1.5 t
Centre of gravity:
500 mm
Standard tyres:
L 4
Still RC 40-16 T

Still RC 40-16 T

Nominal load at COG:
1.6 t
Centre of gravity:
500 mm
Standard tyres:
SE 2x/2
Weight:
2.77 t
Desta MV 12 B

Desta MV 12 B

Nominal load at COG:
1.2 t
Centre of gravity:
500 mm
Standard tyres:
L 4

Sell Doosan GC15S-9

LPG Forklifts appraisal with LECTURA Valuation

Valuation

Whether you need to get value of your Doosan GC15S-9 or valuation of your LPG Forklifts fleet, LECTURA Valuation will help. Simply fill the machine details and see the values for LPG Forklifts in few clicks.

Data provided by Lectura logo

Spare parts & Components

Get spare parts for Doosan GC15S-9 easily from our partners

Spare parts

Do your lookup for high quality parts for Doosan GC15S-9 online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the LPG Forklifts spare parts easily today - worldwide.

Transport

LPG Forklifts Transport & Shipping Services

In case you look into transport options for your machine, take advantage of our services. Check the ideal transport quotes for LPG Forklifts built on dimensions and weight. Our partners provide major services to meet your demands.

Data provided by Lectura logo

News

Material Handling News by LECTURA 10.06.2026

LECTURA and Rental-Portal Announce Strategic Partnership to Simplify Equipment Rental

LECTURA and Rental-Portal Announce Strategic Partnership to Simplify Equipment Rental

LECTURA, a heavy machinery intelligence leader and technical data expert, has entered into a strategic partnership with Rental-Portal, a specialised digital marketplace for machinery hire. The collaboration connects in-depth equipment research directly with rental availability, offering professionals a seamless route from machine comparison to immediate rental.