Manufacturer

    All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts LPG Forklifts LPG Forklifts Crown Crown C-5 1000-40 specifications

    Technical specs - C-5 1000-40 Crown

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    Nominal load at COG 1.814 t
    Standard tyres Front: 21 x 7 x 15 / Rear: 16 x 6 x 10.5
    Centre of gravity 610 mm
    Weight 3.955 t
    Total width 1090 mm
    Construction height 2108 mm
    Turning radius 1.991 m
    Lifting height 7.467 m
    Travel speed with / without load 17.5 / 17.7 km/h
    Hoisting with / without load 0.65 / 0.66 m/s
    Lowering with load 0.47 m/s
    max. climbing ability 34.1 %
    Engine manuf. N/A
    Engine type N/A
    Engine power 44 kW
    Engine power 59 HP
    Displacement 2.4 l
    Revolutions at max torque 1400 rpm
    Max. torque 169.4 Nm
    No. of cylinders 4
    Transmission type ###
    Dimension lxwxh ###
    Cylinder bore x stroke ###
    Weight ###
    Emission level ###

    L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulics with Simplex mast (3,3m up to 10t • 5m > 10t load capacity)

    RAVAS iForks-32 weight scaling solution for your Crown C-5 1000-40

    RAVAS iForks-32

    Successful RAVAS scale forks

    Fit iForks for your Crown C-5 1000-40 and realise immediate cost savings

    Functions:

    Gross/net weighing

    Totalling with sequence number

    Weight data transfer to smart phone, tablet, handheld and WMS/ERP system

    Benefits:

    Installation within 5 minutes

    Completely wireless with digital calibration

    More information

    Download data sheets - Crown C-5 1000-40

    X

    What do you think about this machine?

    Compare Crown C-5 1000-40 with other models

    Press 1 image

    Crown C-5 1000-40

    1.814t

    Front: 21 x 7 x 15 / Rear: 16 x 6 x 10.5

    610 mm

    Crown products

    Check out 14 Crown products here

    More about Crown

    Material Handling News by LECTURA 09.08.2020

    Our collaboration with STILL Italia keeps going on
    Our collaboration with STILL Italia keeps going on

    Our collaboration with STILL Italia keeps going. They have entrusted us on developing and supplying two 8 tons at 900 mm electric forklifts compact on sizes, length from the fork face l2= 3350 mm only.

    More industry news