Artison ZFG 50
5t
L2x/2
600 mm
.jpg)
.png)
Weekly overview of interesting news from the heavy machinery industry.
Technical specs - ZFG 50 Artison
Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.
| Nominal load at COG | 5 t |
|---|---|
| Standard tyres | L2x/2 |
| Centre of gravity | 600 mm |
| Transmission type | W |
| Weight | 6.75 t |
| Total width | 1450 mm |
| Construction height | 2340 mm |
| Turning radius | 3.05 m |
| Lifting height | 4 m |
| Travel speed with / without load | 27/29 km/h |
| Hoisting with / without load | 0.35/0.48 m/s |
| Lowering with load | 0.4/0.4 m/s |
| max. climbing ability | 20 % |
| Engine manuf. | k.A. |
| Engine type | k.A. |
| Engine power | 70 kW |
| Displacement | 4.294 l |
| Revolutions at max torque | 2600 rpm |
| No. of cylinders | 6 |
| Engine power | ### |
| Dimension lxwxh | ### |
| Max. torque | ### |
| Cylinder bore x stroke | ### |
| Weight | ### |
| Emission level | ### |
L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulics with Simplex mast (3,3m up to 10t • 5m > 10t load capacity)
RAVAS iForks-32 weight scaling solution for your Artison ZFG 50
Successful RAVAS scale forks
Fit iForks for your Artison ZFG 50 and realise immediate cost savings
Functions:
Gross/net weighing
Totalling with sequence number
Weight data transfer to smart phone, tablet, handheld and WMS/ERP system
Benefits:
Installation within 5 minutes
Completely wireless with digital calibration
X
What do you think about this machine?
.jpg)
Compare Artison ZFG 50 with other models
Artison products
Check out 3 Artison products here