SK09J-2 Komatsu SK09J-2 Specifications & Technical Data (1999—2003)

The Komatsu SK09J-2 is a skid steer loader manufactured from 1999 to 2003. It has a weight of 3.4 tons and a transport length of 3…

The Komatsu SK09J-2 is a skid steer loader manufactured from 1999 to 2003. It has a weight of 3.4 tons and a transport length of 3.21 meters. The bucket capacity is 0.45 cubic meters, and it has a travel speed of 13 km/h. The transport width is 1.75 meters, and the transport height is 2.25 meters. The rated operating capacity is 870 kilograms.

Visit Komatsu live at

Technical specs - SK09J-2 Komatsu

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Weight
3.4 t
Rated operating capacity
870 kg
Standard tyres
12-16.5
Bucket capacity
0.45 m³
Driver protection
Kb
Transport length
3.21 m
Transport width
1.75 m
Transport height
2.25 m
Travel speed
13 km/h
Model series
SK
Engine manuf.
Komatsu
Engine type
4D98E 1FD
Engine power
50 kW

More technical details, like: track width, bucket width, steering mode, max. discharge height, lifting force, dimension lxwxh, displacement, revolutions at max torque, max. torque, no. of cylinders, cylinder bore x stroke, emission level...

More technical details, like: track width, bucket width, steering mode, max. discharge height, lifting force, dimension lxwxh, displacement, revolutions at max torque, max. torque, no. of cylinders, cylinder bore x stroke, emission level, access, engine manufacturer, engine model, aspiration, rated speed, engine output - net, transmission type, tyre size, length - with bucket, width - no bucket, width - with bucket, height - top of cab, ground clearance, wheelbase, height to hinge pin, dump angle, dump height - maximum, reach - max dump height, turning radius - rear corner, turning radius - bucket corner, fuel tank, heaped capacity, tipping load, operating capacity, speed - maximum, breakout - bucket, lift capacity, pump type, pump flow, system pressure, operating weight are available in the full technical specs.

Basic model with ROPS cabin and std. shovel with teeth

Special equipment

Diesel particulate filter
No
LPG motor
No
Burglar proof system
No

Download datasheets (PDF)

Komatsu SK09J-2 FAQ

When was the Komatsu SK09J-2 manufactured?

The Komatsu SK09J-2 was manufactured from 1999 to 2003.

How much does the Komatsu SK09J-2 weigh?

The Komatsu SK09J-2 weighs 3.4 tons.

What are the transport dimensions of the Komatsu SK09J-2 skid steer loader?

The Komatsu SK09J-2 has a transport length of 3.21 meters, a transport width of 1.75 meters, and a transport height of 2.25 meters.

What is the travel speed of the Komatsu SK09J-2 skid steer loader?

The Komatsu SK09J-2 has a travel speed of 13 km/h.

What are the undercarriage specifications of the Komatsu SK09J-2 skid steer loader?

The Komatsu SK09J-2 skid steer loader is equipped with standard tyres sized 12-16.5.

What is the rated operating capacity of the Komatsu SK09J-2 skid steer loader?

The Komatsu SK09J-2 skid steer loader has a rated operating capacity of 870 kilograms.

What is the bucket capacity of the Komatsu SK09J-2 skid steer loader?

The Komatsu SK09J-2 skid steer loader has a bucket capacity of 0.45 cubic meters.

What operator safety and support features does the Komatsu SK09J-2 have?

The Komatsu SK09J-2 has a driver protection cabin.

How much is a Komatsu SK09J-2 Skid steer loader (1999u20132003) worth?

The residual value of the Komatsu SK09J-2 depends on the machine's individual parameters. Visit the LECTURA Valuation to check it.

Komatsu SK09J-2 overview

Komatsu SK09J-2 features overview

Safety features

A sophisticated system of sensors disables the movement and functions of the compact Komatsu loader if the operator performs incorrect operations. This once again demonstrates the attention paid by the designers to ensuring maximum safety in the workplace. The SK09J-2 provides excellent all-round visibility even thanks to the special loader arm profile: the operator can at all times identify the position of the machine in respect to its surroundings, especially when working in restricted spaces.


Superior engine and hydraulic system

The new-generation Komatsu engine guarantees not only high power and low fuel consumption, but reduced gaseous emissions, low noise levels, limited vibrations, excellent reliability and easy accessibility for routine maintenance operations. The closed-centre hydraulic system, with direct discharge on the pump, ensures both smooth, progressive movements and hydraulic power.


Simplified maintenance

Special attention has been paid to making routine and specific maintenance operations as simple as possible. Routine maintenance operations can be performed by opening the rear door, allowing easy access to all the check points. For special maintenance operations, the tilting cab offers full access to the transmission and hydraulic system components.


Operator environment

Standard Equipment

ROPS-FOPS tip-up operator cabAdjustable seat with safety beltSafety bar and sensorsInstrument panel including: hour counter, generator pilot light, oil level indicator, fuel level indicator, air filter clogging warning light, hydraulic oil filter clogging warning light, engine water thermometer, safety warning lightsHydraulic kit (3rd element)Standard tyres 12 x 16,5Standard bucket with teethLifting hooksParking brakeWarning hornLoader self-leveling hydraulic valve


Drive system

Options

Cold planer Special buckets Forks Beacon Backhoe Auger Hydraulic hammer Angledozer blade Catalytic muffler for exhaust gas Road homologation with: directionals pilot light, dimmers pilot light, working lights pilot light Side windows Suspension seat Closed cab with heating Independent rear outriggers Airboss tyres 12 x 16,5 Floating element Additional rear counterweight


Events

Visit Komatsu live at

NordBau 2026

Holstenhallen Neumünster, Germany

September
NordBau 2026

GaLaBau 2026

Nürnberg, Germany

GaLaBau 2026

Machine inspection

Ask for inspection of your Komatsu SK09J-2 from experts

Machine inspection

Mevas is an international operating inspection service for used heavy machinery. Construction machinery inspectors are available in more than 20 countries.

Use this service to minimise the risk when buying used equipment. An inspection by Mevas costs less than repairing a defective hydraulic cylinder.

Provided by: Mevas — The Heavy Equipment Inspectors

Buy & Rent

Compare Komatsu SK09J-2 with similar Skid Steer Loaders

Komatsu SK09J-2

Komatsu SK09J-2

Weight:
3.4 t
Rated operating capacity:
870 kg
Standard tyres:
12-16.5
Bucket capacity:
0.45 m³
Caterpillar 242D

Caterpillar 242D

Weight:
3.17 t
Rated operating capacity:
975 kg
Standard tyres:
12x16.5
Bucket capacity:
0.36 m³
Volvo MC70C

Volvo MC70C

Weight:
2.84 t
Rated operating capacity:
703 kg
Standard tyres:
10x16.5-8PR
Bucket capacity:
0.39 m³
Takeuchi TL 130

Takeuchi TL 130

Weight:
3.4 t
Rated operating capacity:
735 kg
Bucket capacity:
0.36 m³
XCMG XC740K

XCMG XC740K

Weight:
3.14 t
Rated operating capacity:
750 kg
Standard tyres:
10-16.5
Bucket capacity:
0.45 m³

Do you want to see more detailed comparison?

Show me!

Sell Komatsu SK09J-2

Skid Steer Loaders appraisal with LECTURA Valuation

Valuation

Whether you need to get value of your Komatsu SK09J-2 or valuation of your Skid Steer Loaders fleet, LECTURA Valuation will help. Simply fill the machine details and see the pricing information for Skid Steer Loaders in few clicks.

Data provided by Lectura logo

Spare parts & Components

Get spare parts for Komatsu SK09J-2 easily from our partners

Spare parts

Do your lookup for high quality parts for Komatsu SK09J-2 online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Skid Steer Loaders spare parts easily today - worldwide.

Transport

Skid Steer Loaders Transport & Shipping Services

In case you look into transport options for your machine, apply our services. Seek for the ideal transport quotes for Skid Steer Loaders created on transport dimensions and weights. Our partners provide large-scale services to meet your requirements.

Data provided by Lectura logo

News