268B Caterpillar 268B Specifications & Technical Data (2004—2009)

The Caterpillar 268B is a skid steer loader manufactured by Caterpillar from 2004 to 2009. It has a weight of 3.6 tons and a bucke…

The Caterpillar 268B is a skid steer loader manufactured by Caterpillar from 2004 to 2009. It has a weight of 3.6 tons and a bucket capacity of 0.4 cubic meters. The rated operating capacity of this construction machine is 1225 kilograms.

Skid Steer Loaders Caterpillar 268B

Technical specs - 268B Caterpillar

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Weight
3.6 t
Rated operating capacity
1225 kg
Standard tyres
12x16.5
Bucket capacity
0.4 m³
Driver protection
Ü
Travel speed
12.1 km/h
Engine manuf.
Caterpillar
Engine type
3044 CT
Engine power
55 kW

More technical details, like: track width, bucket width, steering mode, transport length, transport width, transport height, max. discharge height, lifting force, model series, dimension lxwxh, displacement, revolutions at max torque...

More technical details, like: track width, bucket width, steering mode, transport length, transport width, transport height, max. discharge height, lifting force, model series, dimension lxwxh, displacement, revolutions at max torque, max. torque, no. of cylinders, cylinder bore x stroke, emission level, lift geometry, access, engine manufacturer, engine model, aspiration, rated speed, engine output - net, engine output - gross, transmission type, tyre size, length - no bucket, length - with bucket, width - no bucket, width - with bucket, height - top of cab, ground clearance, wheelbase, rear departure angle, height to hinge pin, dump angle, dump height - maximum, reach - max dump height, turning radius - rear corner, turning radius - bucket corner, fuel tank, tipping load, operating capacity, speed - maximum, breakout - lift, breakout - bucket, pump type, pump flow, system pressure, operating weight are available in the full technical specs.

Basic model with ROPS cabin and std. shovel with teeth

Special equipment

Diesel particulate filter
No
LPG motor
No
Burglar proof system
No

Download specalog and datasheets (PDF)

Caterpillar 268B FAQ

When was the Caterpillar 268B manufactured?

The Caterpillar 268B was manufactured from 2004 to 2009.

How much does the Caterpillar 268B skid steer loader weigh?

The Caterpillar 268B skid steer loader weighs 3.6 tons.

What is the travel speed of the Caterpillar 268B skid steer loader?

The Caterpillar 268B skid steer loader has a travel speed of 12.1 km/h.

What are the undercarriage tyre specifications of the Caterpillar 268B skid steer loader?

The Caterpillar 268B skid steer loader is equipped with standard tyres sized 12x16.5.

What is the material handling capacity of the Caterpillar 268B skid steer loader?

The Caterpillar 268B skid steer loader has a rated operating capacity of 1225 kilograms.

What is the bucket capacity of the Caterpillar 268B skid steer loader?

The Caterpillar 268B skid steer loader has a bucket capacity of 0.4 cubic meters.

What operator safety and support features does the Caterpillar 268B have?

The Caterpillar 268B is equipped with a roll-over bar for driver protection.

How much is a Caterpillar 268B Skid steer loader (2004u20132009) worth?

The residual value of the Caterpillar 268B depends on the machine's individual parameters. Visit the LECTURA Valuation to check it.

Machine inspection

Ask for inspection of your Caterpillar 268B from experts

Machine inspection

Mevas is an international operating inspection service for used heavy machinery. Construction machinery inspectors are available in more than 20 countries.

Use this service to minimise the risk when buying used equipment. An inspection by Mevas costs less than repairing a defective hydraulic cylinder.

Enquire machine inspection

Provided by: Mevas — The Heavy Equipment Inspectors

Buy & Rent

Compare Caterpillar 268B with similar Skid Steer Loaders

Caterpillar 268B

Caterpillar 268B

Weight:
3.6 t
Rated operating capacity:
1225 kg
Standard tyres:
12x16.5
Bucket capacity:
0.4 m³
Caterpillar 242D

Caterpillar 242D

Weight:
3.17 t
Rated operating capacity:
975 kg
Standard tyres:
12x16.5
Bucket capacity:
0.36 m³
Takeuchi TL 130

Takeuchi TL 130

Weight:
3.4 t
Rated operating capacity:
735 kg
Bucket capacity:
0.36 m³
XCMG XC740K

XCMG XC740K

Weight:
3.14 t
Rated operating capacity:
750 kg
Standard tyres:
10-16.5
Bucket capacity:
0.45 m³
Terex-Schaeff SCL 515

Terex-Schaeff SCL 515

Weight:
3.35 t
Rated operating capacity:
1100 kg
Standard tyres:
12-16.5 EM14
Bucket capacity:
0.5 m³

Do you want to see more detailed comparison?

Show me!

Sell Caterpillar 268B

Skid Steer Loaders appraisal with LECTURA Valuation

Valuation

Whether you need to calculate value of your Caterpillar 268B or valuation of your Skid Steer Loaders fleet, LECTURA Valuation will help. Simply fill the equipment details and see the values for Skid Steer Loaders in few clicks.

Valuate right now!

Data provided by Lectura logo

Spare parts & Components

Get spare parts for Caterpillar 268B easily from our partners

Spare parts

Do your lookup for high quality parts for Caterpillar 268B online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Skid Steer Loaders spare parts easily today - worldwide.

Get parts for Caterpillar 268B now!

Transport

Skid Steer Loaders Transport & Shipping Services

In case you look for a transport your machine, take advantage of our services. Query the most appropriate transport quotes for Skid Steer Loaders built on dimensions and weight. Our partners provide major services to satisfy your demands.

Ask for transport price

Data provided by Lectura logo

News