SR 200 Case SR 200 Specifications & Technical Data (2009—2014)

The Case SR 200 is a skid steer loader manufactured by Case from 2009 to 2014. It has a weight of 3.13 tons and a transport length…

The Case SR 200 is a skid steer loader manufactured by Case from 2009 to 2014. It has a weight of 3.13 tons and a transport length of 2.67 meters. The transport height is 1.99 meters, and the rated operating capacity is 905 kilograms.

Technical specs - SR 200 Case

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Weight
3.13 t
Rated operating capacity
905 kg
Transport length
2.67 m
Transport height
1.99 m
Travel speed
11.6 km/h
Engine manuf.
Case
Engine type
422T-M3
Engine power
55 kW
Displacement
3.2 l
Revolutions at max torque
2500 rpm

More technical details, like: track width, standard tyres, bucket width, bucket capacity, driver protection, steering mode, transport width, max. discharge height, lifting force, model series, dimension lxwxh, max. torque...

More technical details, like: track width, standard tyres, bucket width, bucket capacity, driver protection, steering mode, transport width, max. discharge height, lifting force, model series, dimension lxwxh, max. torque, no. of cylinders, cylinder bore x stroke, emission level, lift geometry, access, telematics available, engine manufacturer, engine model, emission rating, aspiration, rated speed, engine output - net, engine output - gross, torque, transmission type, drive chain rating [ansi], tyre size, length - no bucket, length - with bucket, width - no bucket, width - with bucket, height - top of cab, ground clearance, wheelbase, rear departure angle, height to hinge pin, dump angle, dump height - maximum, reach - max dump height, lift height, turning radius - rear corner, turning radius - bucket corner, fuel tank, heaped capacity, tipping load, operating capacity, speed - maximum, breakout - lift, breakout - bucket, pump type, hydraulic power, hydraulic power - option, pump flow, system pressure, self levelling, operating weight are available in the full technical specs.

Basic model with ROPS cabin and std. shovel with teeth

Special equipment

Diesel particulate filter
No
LPG motor
No
Burglar proof system
No

Download datasheets (PDF)

Case SR 200 FAQ

When was the Case SR 200 manufactured?

The Case SR 200 was manufactured from 2009 to 2014.

How much does the Case SR 200 skid steer loader weigh?

The Case SR 200 skid steer loader weighs 3.13 tons.

What are the transport dimensions of the Case SR 200 skid steer loader?

The Case SR 200 skid steer loader has a transport length of 2.67 meters and a transport height of 1.99 meters.

What is the travel speed of the Case SR 200 skid steer loader?

The Case SR 200 skid steer loader has a travel speed of 11.6 km/h.

What is the rated operating capacity of the Case SR 200 skid steer loader?

The Case SR 200 skid steer loader has a rated operating capacity of 905 kilograms.

How much is a Case SR 200 Skid steer loader (2009u20132014) worth?

The residual value of the Case SR 200 depends on the machine's individual parameters. Visit the LECTURA Valuation to check it.

Machine inspection

Ask for inspection of your Case SR 200 from experts

Machine inspection

Mevas is an international operating inspection service for used heavy machinery. Construction machinery inspectors are available in more than 20 countries.

Use this service to minimise the risk when buying used equipment. An inspection by Mevas costs less than repairing a defective hydraulic cylinder.

Provided by: Mevas — The Heavy Equipment Inspectors

Buy & Rent

Compare Case SR 200 with similar Skid Steer Loaders

Case SR 200

Case SR 200

Weight:
3.13 t
Rated operating capacity:
905 kg
Transport length:
2.67 m
Transport height:
1.99 m
New Holland LS 170

New Holland LS 170

Weight:
2.51 t
Rated operating capacity:
800 kg
Transport length:
3.22 m
Transport height:
1.899 m
Caterpillar 242D

Caterpillar 242D

Weight:
3.17 t
Rated operating capacity:
975 kg
Transport length:
3.49 m
Transport height:
2.11 m
Volvo MC70C

Volvo MC70C

Weight:
2.84 t
Rated operating capacity:
703 kg
Transport length:
3.49 m
Transport height:
1.98 m
Takeuchi TL 130

Takeuchi TL 130

Weight:
3.4 t
Rated operating capacity:
735 kg
Transport length:
3.43 m
Transport height:
2.235 m

Do you want to see more detailed comparison?

Show me!

Sell Case SR 200

Skid Steer Loaders appraisal with LECTURA Valuation

Valuation

Whether you need to calculate value of your Case SR 200 or valuation of your Skid Steer Loaders fleet, LECTURA Valuation will help. Simply fill the equipment details and see the price for Skid Steer Loaders in few clicks.

Data provided by Lectura logo

Spare parts & Components

Get spare parts for Case SR 200 easily from our partners

Spare parts

Do your lookup for high quality parts for Case SR 200 online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Skid Steer Loaders spare parts easily today - worldwide.

Transport

Skid Steer Loaders Transport & Shipping Services

In case you look for a transport your machine, take advantage of our services. Search for the most appropriate transport quotes for Skid Steer Loaders based on dimensions and weight. Our partners provide major options to satisfy your needs.

Data provided by Lectura logo

News

Construction News by LECTURA 16.06.2026

Entegra Attachments, LLC announces purchase of TEI Rock Drills

Entegra Attachments, LLC announces purchase of TEI Rock Drills

Entegra Attachments, LLC, of Saint Charles, IL, is pleased to announce its acquisition of TEI Rock Drills, Inc., a Montrose, CO based manufacturer of specialized drilling machinery used in underground utilities, mining, tunneling, and construction applications.