440 Case 440 Specifications & Technical Data (2005—2008)

The Case 440 is a skid steer loader manufactured by Case from 2005 to 2008. It has a weight of 3.17 tons and a transport length of…

The Case 440 is a skid steer loader manufactured by Case from 2005 to 2008. It has a weight of 3.17 tons and a transport length of 3.38 meters. The bucket capacity is 0.52 cubic meters, with a transport width of 1.6 meters and a transport height of 1.95 meters. The rated operating capacity of this construction machine is 998 kilograms.

Skid Steer Loaders Case 440
Skid Steer Loaders Case 440
Skid Steer Loaders Case 440
Skid Steer Loaders Case 440
Skid Steer Loaders Case 440
Skid Steer Loaders Case 440
Skid Steer Loaders Case 440
Skid Steer Loaders Case 440

Technical specs - 440 Case

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Weight
3.17 t
Rated operating capacity
998 kg
Standard tyres
12.00x16.5
Bucket capacity
0.52 m³
Driver protection
Ü
Steering mode
AL
Transport length
3.38 m
Transport width
1.6 m
Transport height
1.95 m
Travel speed
19.2 km/h
Engine manuf.
Case
Engine type
T445M2
Engine power
66 kW

More technical details, like: track width, bucket width, max. discharge height, lifting force, model series, dimension lxwxh, displacement, revolutions at max torque, max. torque, no. of cylinders, cylinder bore x stroke, emission level...

More technical details, like: track width, bucket width, max. discharge height, lifting force, model series, dimension lxwxh, displacement, revolutions at max torque, max. torque, no. of cylinders, cylinder bore x stroke, emission level, lift geometry, access, engine manufacturer, engine model, aspiration, rated speed, engine output - net, engine output - gross, transmission type, tyre size, length - no bucket, length - with bucket, width - no bucket, width - with bucket, height - top of cab, ground clearance, wheelbase, rear departure angle, height to hinge pin, dump angle, dump height - maximum, reach - max dump height, turning radius - rear corner, turning radius - bucket corner, fuel tank, heaped capacity, tipping load, operating capacity, speed - maximum, breakout - bucket, lift capacity, pump type, pump flow, system pressure, operating weight are available in the full technical specs.

Basic model with ROPS cabin and std. shovel with teeth

Special equipment

Diesel particulate filter
No
LPG motor
No
Burglar proof system
No

Download datasheets (PDF)

Case 440 FAQ

When was the Case 440 skid steer loader manufactured?

The Case 440 skid steer loader was manufactured from 2005 to 2008.

How much does the Case 440 skid steer loader weigh?

The Case 440 skid steer loader weighs 3.17 tons.

What are the transport dimensions of the Case 440 skid steer loader?

The Case 440 skid steer loader has a transport length of 3.38 meters, a transport width of 1.6 meters, and a transport height of 1.95 meters.

What is the travel speed of the Case 440 skid steer loader?

The Case 440 skid steer loader has a travel speed of 19.2 km/h.

What are the undercarriage specifications of the Case 440 skid steer loader?

The Case 440 skid steer loader is equipped with standard tyres sized 12.00x16.5.

What is the steering mode of the Case 440 skid steer loader?

The Case 440 skid steer loader features all-wheel steering.

What is the material handling capacity of the Case 440 skid steer loader?

The Case 440 skid steer loader has a rated operating capacity of 998 kilograms.

What is the bucket capacity of the Case 440 skid steer loader?

The Case 440 skid steer loader has a bucket capacity of 0.52 cubic meters.

What operator safety feature does the Case 440 skid steer loader have?

The Case 440 skid steer loader is equipped with a roll-over bar for driver protection.

How much is a Case 440 Skid steer loader (2005u20132008) worth?

The residual value of the Case 440 depends on the machine's individual parameters. Visit the LECTURA Valuation to check it.

Machine inspection

Ask for inspection of your Case 440 from experts

Machine inspection

Mevas is an international operating inspection service for used heavy machinery. Construction machinery inspectors are available in more than 20 countries.

Use this service to minimise the risk when buying used equipment. An inspection by Mevas costs less than repairing a defective hydraulic cylinder.

Enquire machine inspection

Provided by: Mevas — The Heavy Equipment Inspectors

Buy & Rent

Compare Case 440 with similar Skid Steer Loaders

Case 440

Case 440

Weight:
3.17 t
Rated operating capacity:
998 kg
Standard tyres:
12.00x16.5
Bucket capacity:
0.52 m³
Caterpillar 242D

Caterpillar 242D

Weight:
3.17 t
Rated operating capacity:
975 kg
Standard tyres:
12x16.5
Bucket capacity:
0.36 m³
Volvo MC70C

Volvo MC70C

Weight:
2.84 t
Rated operating capacity:
703 kg
Standard tyres:
10x16.5-8PR
Bucket capacity:
0.39 m³
Takeuchi TL 130

Takeuchi TL 130

Weight:
3.4 t
Rated operating capacity:
735 kg
Bucket capacity:
0.36 m³
XCMG XC740K

XCMG XC740K

Weight:
3.14 t
Rated operating capacity:
750 kg
Standard tyres:
10-16.5
Bucket capacity:
0.45 m³

Do you want to see more detailed comparison?

Show me!

Sell Case 440

Skid Steer Loaders appraisal with LECTURA Valuation

Valuation

Whether you need to get value of your Case 440 or valuation of your Skid Steer Loaders fleet, LECTURA Valuation will help. Simply fill the form and see the pricing information for Skid Steer Loaders in few clicks.

Valuate right now!

Data provided by Lectura logo

Spare parts & Components

Get spare parts for Case 440 easily from our partners

Spare parts

Do your lookup for high quality parts for Case 440 online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Skid Steer Loaders spare parts easily today - worldwide.

Get parts for Case 440 now!

Transport

Skid Steer Loaders Transport & Shipping Services

In case you want a transport for your machine, apply our services. Ask for the best fitting transport quotes for Skid Steer Loaders formed on transport dimensions and weights. Our partners provide large-scale options to satisfy your wishes.

Ask for transport price

Data provided by Lectura logo

News

Construction News by LECTURA 09.06.2026

More industry news