KX101-3α3 Kubota excavator specs & dimensions (2011 - 2016)

Strong digging force
A well-balanced arm and bucket guarantee superior digging power whenever you need it. The KX101-3α3 delivers an impressive shovel grab force. Its powerful and balanced arm and bucket allow the operator to finish work more effectively.
Working equipment
1350 mm Arm, auxiliary hydraulic circuit line to the arm end, 2 working lights on the cab and 1 light on the boom.

THE SYSTEM
The introduction of Kubota's new simple and safe anti-theft system. Our single key system features an IC chip that will only start the engine when the system detects the appropriate key. Standard equipment includes a red programming key, as well as two black operating buttons. And up to four Black keys can be programmed. In addition, you have peace of mind knowing your construction machines could not be in safer hands.
SAFETY/SECURITY
Only programmed keys allow the engine to start. Even identically shaped keys can only start the engine when they are programmed. In fact, trying to start the engine with an unprogrammed key activates the alarm of the system. This alarm is continued even after removing a non-programmed key. It stops only as soon as a programmed button is inserted into the ignition and engaged for starting the engine.
EASY OPERATION
No special procedures necessary. No PIN numbers required. Simply turn the key around. Plus, our simple single-key security system allows access to the cab door and engine hood as well as fuel tank.
EASY PROGRAMMING
A red programming key and two pre-programmed Black operating buttons are standard features. If a black key is wrongly placed, or if additional black keys are needed (maximum two can be added), Key Programming simply takes place. Simply insert the red key followed by the black pushbuttons.
The alarm sounds
Insert the Red programming button, then press the monitor button. Add new individual Black Operating button.
Kubota engine
Kubota's unique new 31.1 hp (Three Vortex Combustion System) E-TVCS enables high energy output, low vibration and low fuel consumption while minimizing exhaust emissions.

Load Sensing Hydraulic System
Kubota's improved 1-pump load sensing hydraulic system ensures smoother operation, regardless of the load size. It allows flow of the hydraulic oil according to the specific area of lever movement of the operator.
Adjustable maximum oil flow on auxiliary circuit
The maximum oil flow rate of the auxiliary circuit can be changed/adjusted by simply pushing a switch without needing additional tools. This simplifies the use of front attachments such as tilt shovels, brush cutters and hydraulic hammers so you can reduce or increase flow to get exactly the right level of control.
Any attachment that requires a constant oil flow, this ON/OFF press switch enables a simple operation.
When control levers are left neutral for more than 4 seconds Engine speed is automatically reduced to idle rpm The engine RPM is promptly reset to the selector U/min setting if the levers are moved again...
Hydraulic system
Adjustable maximum oil flow at auxiliary circuit (SP1), pressure accumulator, Hydraulic pressure check ports, Straight travel circuit, Third line hydraulic direct return for, auxiliary switch on right control lever.

Undercarriage
300 mm rubber track, 1 x upper track roller, 4 x outer flange type lower track roller, 2 speed travel switch on dozer lever.

Engine inspection
Primary points, such as the engine and air cleaner, can easily be inspected and serviced via the rear bonnet of the engine. Fuel filters and water separators are independently installed from each other both within the strong and durable steel reinforced hood which is widely opened for quick inspection and routine maintenance. An engine inspection window is also located behind the seat to facilitate access to the engine injection nozzles.
Control valve inspection
A quick and easy inspection of the control valve is possible by simply opening the locking on the bonnet located to the right of the cab. If more detailed maintenance or repairs are required, the remaining panels can be easily removed at the swing frame with standard tools.
Two-piece hose design
The two-piece hose design on dozer and boom cylinders reduces hose replacement time by 60% compared to nonjoint types. In addition, this design virtually eliminates the need to enter the machine for maintenance.

ROPS/FOPS (level, cabin and canopy
The cab and canopy offer maximum safety to the operator with their Rollover Protection Structure (ROPS) and Falling Object Protection Structure (FOPS).
Swivel negative brake
In the case of pivoting negative brake, the swing function is automatically locked when the engine is stopped or the control lever is raised. This feature eliminates the need for a moving transport lock pin.
Engine/Fuel system
Double Element Air Cleaner, Electric Fuel Pump, Auto Idling System, ROPS (Rollover Protective Structure, ISO3471), FOPS (Falling Object Protective Structure) Level 1, weight adjustable full suspension seat, seat belt, Hydraulic pilot control lever with wrist rests, travel lever with foot pedals, cab heater for defrost & dumping, emergency exit hammer, front window power assisted with 2 gas flaps, 12 V power source for Radiostereo, location for 2 speakers and radio antenna, cup bracket.
Canopy
ROPS (Roll-over Protective Structure, ISO3471), FOPS (Falling Object Protective Structure) Level 1, weight adjustable full suspension seat, seat belt, Hydraulic pilot control lever with wrist rests, travel lever with foot pedals.
Safety system
Anti-theft, engine start safety system on left console, Travel Lock System on left console, swing lock system, Boom anti-fall circuit in control valve.