Weidemann T 5625 CX 80
4.1t
12.5/80-20AS
500 mm
.png)
Weekly overview of interesting news from the heavy machinery industry.
Technical specs - T 5625 CX 80 Weidemann
Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.
| Nominal load at COG | 4.1 t |
|---|---|
| Standard tyres | 12.5/80-20AS |
| Centre of gravity | 500 mm |
| Transmission type | HY |
| Max. Reach horizontal | 3.42 m |
| Capacity at full forward reach | 1.25 t |
| Lifting height | 5.4 m |
| Weight | 5.2 t |
| Engine manuf. | Deutz |
| Engine type | BF4M2011 |
| Engine power | 56 kW |
| Capacity at full lift hight | ### |
| Transport length | ### |
| Transport width | ### |
| Transport height | ### |
| Travel speed | ### |
| max. climbing ability | ### |
| Engine power | ### |
| Dimension lxwxh | ### |
| Displacement | ### |
| Revolutions at max torque | ### |
| Max. torque | ### |
| No. of cylinders | ### |
| Cylinder bore x stroke | ### |
| Weight | ### |
| Emission level | ### |
| Engine Manufacturer | ### |
| Engine Model | ### |
| Rated Speed | ### |
| Engine Output - Net | ### |
| Transmission Type | ### |
| Tyre - Size | ### |
| Height - Over Cab | ### |
| Wheelbase | ### |
| Length - Shovel On Ground | ### |
| Ground Clearance | ### |
| Width - Over Tyres | ### |
| Shovel - Type | ### |
| Shovel - Width | ### |
| Full Lift Dump Height | ### |
| Full Lift Reach | ### |
| Loader - Arm Type | ### |
| Loader - Geometry | ### |
| Dump Angle - At Dump | ### |
| Dump Angle - Maximum | ### |
| Height - Pivot Pin | ### |
| Full Lift Dump Height - Maximum | ### |
| Height - Maximum | ### |
| Dig Depth | ### |
| Turning Radius - Over Shovel | ### |
| Fuel Tank | ### |
| Heaped Capacity | ### |
| Straight Tipping Load | ### |
| Breakout - Shovel | ### |
| Breakout - Shovel | ### |
| Operating Weight | ### |
All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel
T 5625 CX 80 Weidemann - Special equipment
- Diesel particulate filter
- StVZO Equipment
- Inclination correction
- Side displacement
RAVAS iForks-32 weight scaling solution for your Weidemann T 5625 CX 80
Successful RAVAS scale forks
Fit iForks for your Weidemann T 5625 CX 80 and realise immediate cost savings
Functions:
Gross/net weighing
Totalling with sequence number
Weight data transfer to smart phone, tablet, handheld and WMS/ERP system
Benefits:
Installation within 5 minutes
Completely wireless with digital calibration
X
What do you think about this machine?
.jpg)
Compare Weidemann T 5625 CX 80 with other models
Weidemann products
Check out 4 Weidemann products here