Panoramic P 38.13 Plus Merlo Telehandler Specs & Dimensions (2016 - 2019)

Name: Merlo Panoramic P 38.13 Plus Telehandlers
Brand: Merlo

The Merlo Panoramic P 38.13 Plus is a telehandler manufactured between 2016 and 2019. It weighs 8.65 tons and has a transport leng…

The Merlo Panoramic P 38.13 Plus is a telehandler manufactured between 2016 and 2019. It weighs 8.65 tons and has a transport length of 5.24 meters. The nominal load at the center of gravity is 3.8 tons, and it can lift loads up to a height of 12.6 meters. At full forward reach, it has a capacity of 0.8 tons. The center of gravity is located at 500 millimeters. It has a travel speed of 40 km/h and can climb slopes with a maximum gradient of 45 percent. The capacity at full lift height is 3.5 tons. The transport width is 2.22 meters, and the transport height is 2.44 meters. Special equipment includes inclination correction, side displacement, and StVZO equipment.

Telehandlers Merlo Panoramic P 38.13 Plus

Panoramic P 38.13 Plus

Years of manufacture: 2016—2019

Data sheet
Buy & Rent
Valuate & Sell
Spare parts
Transport
News

Technical specs - Panoramic P 38.13 Plus Merlo

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG: 3.8 t

Model series: Panasonic

Centre of gravity: 500 mm

Standard tyres: 405/70-20 (16/70-20) 14 PR

Max. Reach horizontal: 8.7 m

Capacity at full forward reach: 0.8 t

Lifting height: 12.6 m

Capacity at full lift height: 3.5 t

Weight: 8.65 t

Transport length: 5.24 m

Transport width: 2.22 m

Transport height: 2.44 m

Travel speed: 40 km/h

max. climbing ability: 45 %

Engine manuf.: k.A.

Engine type: k.A.

Engine power: 75 kW

Dimension lxwxh: 701 x 592 x 790 mm

Displacement: 3.6 l

Revolutions at max torque: 1600 rpm

Max. torque: 390 Nm

No. of cylinders: 4

Cylinder bore x stroke: 98 x 120 mm

Emission level: IV Final

More technical details, like: transmission type, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, cab position, chassis type, levelling - chassis, stabilisers, drive - 2w / 4w, transmission type, attachment quickhitch, telematics available, engine manufacturer, emission rating, aspiration, rated speed, engine output - gross, tyre - front size, tyre - rear size, service brake - type, service brake - location, length - front of carriage, height - over cab, width - operating, wheelbase, ground clearance, width - cab, width - stabiliser spread, boom angle - maximum, lift height - maximum, reach - maximum, reach - at maximum lift height, reach - ground with maximum capacity, unstabilised lift height - with maximum capacity, stabilised lift height - with maximum capacity, turning radius - over tyres, lift capacity - maximum, lift capacity - to max height, lift capacity - to max reach, unstabilised lift capacity - maximum, unstabilised lift capacity - to max height, unstabilised lift capacity - to max reach, stabilised lift capacity - maximum, stabilised lift capacity - to max height, stabilised lift capacity - to max reach, fuel tank, number of boom sections, load centre, lift capacity - fork maximum, speed - forward maximum, operating weight are available in the full technical specs.

All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

Special equipment

Diesel particulate filter: No
StVZO Equipment: Yes
Inclination correction: Yes
Side displacement: Yes

Download datasheets (PDF)

Panoramic P 38.13 Plus Merlo Specification for Europe (EN)

Buy & Rent

Used Merlo Telehandlers for sale

LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.

Get in touch for more details:

Go to the offers

Compare Merlo Panoramic P 38.13 Plus with similar Telehandlers

Merlo Panoramic P 38.13 Plus

Nominal load at COG:: 3.8 t

Model series:: Panasonic

Centre of gravity:: 500 mm

Standard tyres:: 405/70-20 (16/70-20) 14 PR

Komatsu WH609

Nominal load at COG:: 3.5 t

Model series:: WH

Centre of gravity:: 500 mm

Standard tyres:: 405/70-24 PR14

Merlo TF 33.9 CS-120

Nominal load at COG:: 3.3 t

Model series:: TF

Centre of gravity:: 500 mm

Standard tyres:: 405/70 R24 14 PR

Sennebogen 305 XL

Nominal load at COG:: 4.5 t

Model series:: XL

Centre of gravity:: 600 mm

Standard tyres:: 405/70 R10

Caterpillar TH 82

Nominal load at COG:: 4 t

Model series:: TH

Centre of gravity:: 500 mm

Standard tyres:: 15.5-25

Do you want to see more detailed comparison?

Show me!

Sell Merlo Panoramic P 38.13 Plus

Telehandlers appraisal with LECTURA Valuation

Whether you need to get price of your Merlo Panoramic P 38.13 Plus or valuation of your Telehandlers fleet, LECTURA Valuation will help. Simply fill the equipment details and see the values for Telehandlers in few clicks.

Valuate right now!

Data provided by

Spare parts & Components

Get spare parts for Merlo Panoramic P 38.13 Plus easily from our partners

Do your lookup for high quality parts for Merlo Panoramic P 38.13 Plus online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Telehandlers spare parts easily today - worldwide.

Get parts for Merlo Panoramic P 38.13 Plus now!

Transport

Telehandlers Transport & Shipping Services

In case you look into transport options for your machine, utilise our services. Look for the most appropriate transport quotes for Telehandlers built on transport dimensions and machine weight. Our partners provide extensive options to satisfy your demands.

Ask for transport price

Data provided by

News

Material Handling News by LECTURA 10.06.2026

LECTURA and Rental-Portal Announce Strategic Partnership to Simplify Equipment Rental

LECTURA, a heavy machinery intelligence leader and technical data expert, has entered into a strategic partnership with Rental-Portal, a specialised digital marketplace for machinery hire. The collaboration connects in-depth equipment research directly with rental availability, offering professionals a seamless route from machine comparison to immediate rental.