Panoramic P 37.12 Plus Merlo Telehandler Specs & Dimensions (2006 - 2015)

Name: Merlo Panoramic P 37.12 Plus Telehandlers
Brand: Merlo

The Merlo Panoramic P 37.12 Plus is a telehandler manufactured by Merlo from 2006 to 2015. It has a weight of 8.5 tons and a trans…

The Merlo Panoramic P 37.12 Plus is a telehandler manufactured by Merlo from 2006 to 2015. It has a weight of 8.5 tons and a transport length of 4.85 meters. The telehandler has a nominal load at the center of gravity of 3.7 tons and a lifting height of 11.5 meters. It has a capacity of 0.6 tons at full forward reach and 2 tons at full lift height. The center of gravity is located at 500 millimeters. The telehandler has a travel speed of 40 km/h and a transport width of 2.22 meters. The transport height is 2.44 meters. Special equipment includes inclination correction and side displacement.

Panoramic P 37.12 Plus

Years of manufacture: 2006—2015

Data sheet
Buy & Rent
Valuate & Sell
Spare parts
Transport
News

Technical specs - Panoramic P 37.12 Plus Merlo

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG: 3.7 t

Model series: Panasonic

Centre of gravity: 500 mm

Standard tyres: 16/70-20

Max. Reach horizontal: 7.6 m

Capacity at full forward reach: 0.6 t

Lifting height: 11.5 m

Capacity at full lift height: 2 t

Weight: 8.5 t

Transport length: 4.85 m

Transport width: 2.22 m

Transport height: 2.44 m

Travel speed: 40 km/h

Engine manuf.: Perkins

Engine type: 1104D-44T

Engine power: 74.5 kW

More technical details, like: transmission type, max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, displacement, revolutions at max torque, max. torque, no. of cylinders, cylinder bore x stroke, emission level, cab position, chassis type, levelling - chassis, stabilisers, drive - 2w / 4w, transmission type, engine manufacturer, emission rating, aspiration, rated speed, engine output - gross, tyre - front size, tyre - rear size, service brake - type, service brake - location, length - front of carriage, height - over cab, width - operating, wheelbase, ground clearance, width - cab, boom angle - maximum, lift height - maximum, reach - maximum, reach - at maximum lift height, reach - ground with maximum capacity, unstabilised lift height - with maximum capacity, turning radius - over tyres, lift capacity - maximum, lift capacity - to max height, lift capacity - to max reach, unstabilised lift capacity - maximum, unstabilised lift capacity - to max height, unstabilised lift capacity - to max reach, fuel tank, number of boom sections, load centre, lift capacity - fork maximum, speed - forward maximum, operating weight are available in the full technical specs.

All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

Special equipment

Diesel particulate filter: No
StVZO Equipment: No
Inclination correction: Yes
Side displacement: Yes

Download datasheets (PDF)

Buy & Rent

Used Merlo Telehandlers for sale

LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.

Get in touch for more details:

Go to the offers

Compare Merlo Panoramic P 37.12 Plus with similar Telehandlers

Merlo Panoramic P 37.12 Plus

Nominal load at COG:: 3.7 t

Model series:: Panasonic

Centre of gravity:: 500 mm

Standard tyres:: 16/70-20

Komatsu WH609

Nominal load at COG:: 3.5 t

Model series:: WH

Centre of gravity:: 500 mm

Standard tyres:: 405/70-24 PR14

Merlo TF 33.9 CS-120

Nominal load at COG:: 3.3 t

Model series:: TF

Centre of gravity:: 500 mm

Standard tyres:: 405/70 R24 14 PR

Caterpillar TH 82

Nominal load at COG:: 4 t

Model series:: TH

Centre of gravity:: 500 mm

Standard tyres:: 15.5-25

Haulotte HTL4014

Nominal load at COG:: 4 t

Model series:: HTL

Centre of gravity:: 500 mm

Standard tyres:: 400/80-24

Do you want to see more detailed comparison?

Show me!

Sell Merlo Panoramic P 37.12 Plus

Telehandlers appraisal with LECTURA Valuation

Whether you need to get value of your Merlo Panoramic P 37.12 Plus or valuation of your Telehandlers fleet, LECTURA Valuation will help. Simply fill the machine information and see the price for Telehandlers in few clicks.

Valuate right now!

Data provided by

Spare parts & Components

Get spare parts for Merlo Panoramic P 37.12 Plus easily from our partners

Do your lookup for high quality parts for Merlo Panoramic P 37.12 Plus online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Telehandlers spare parts easily today - worldwide.

Get parts for Merlo Panoramic P 37.12 Plus now!

Transport

Telehandlers Transport & Shipping Services

In case you want a transport for your machine, take advantage of our services. Examine favourable transport quotes for Telehandlers based on dimensions and weight. Our partners provide major options to fit your needs.

Ask for transport price

Data provided by

News

Material Handling News by LECTURA 17.06.2026