Manufacturer

    All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts Telehandlers Telehandlers Merlo Merlo P 40.8 K specifications

    Merlo P 40.8 K Specifications & Technical Data (2002-2006)

    Rate this machine now!

    The P 40.8 K telehandler model is manufactured by Merlo. Find and download detailed specs and data sheets for this machine here. ... Read more

    The P 40.8 K telehandler model is manufactured by Merlo. Find and download detailed specs and data sheets for this machine here.

    Equipped with a powerful Perkins engine, this P 40.8 K 7.6t machine can provide 62kW or 83 horse power for the telehandler. This Merlo telehandler belongs to the biggest machine segment in the telehandlers category. The model's dimensions are 4.635m x 2.22m x 2.44m. The size of standard tyres for this Merlo P 40.8 K is 16/70-20. Operators can travel by 20km/h with this telehandler. Max. Horizontal reach of this P 40.8 K model from Merlo is 4,3m. 4t is its maximum nominal load capacity with a 500mm center of gravity. The P 40.8 K has a lift height of 8.24m, to which it can lift 3t. The Merlo P 40.8 K can operate up to 1.3t at full forward reach.

    It has been sold without Inclination correction, Diesel particulate filter and StVZO Equipment as of 2006. Take the original Merlo P 40.8 K datasheet for even more detailed specifications and machine details. Available in German, LECTURA Specs offers a free download of highly detailed specifications and machine descriptions of this model.

    This model can be acquired for a list price between €65,000 and €82,000. Production of the P 40.8 K stopped in 2006. For more detailed information about pricing and current residual values, check out the LECTURA Valuation system.

    Based on other telehandlers specifications and pricing variations, the Merlo P 40.8 K can be considered similar to the New Holland LM 5060 (250), Dieci ET HVN 40.8T and Manitou MT 1240 (6.00). The most commonly viewed Merlo models of this type on LECTURA Specs are the TF 33.7-115, TF 50.8 T-120 and TF 50.8 T-CS-156-CVTRONIC, and 56 other telehandlers, which currently range from 2.7t up to 12t are also available. Want more detailed specifications? Download the latest Merlo P 40.8 K specs data sheet on LECTURA Specs today!

    Technical specs - P 40.8 K Merlo

    Specification

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    • Nominal load at COG 4 t
    • Standard tyres 16/70-20
    • Centre of gravity 500 mm
    • Max. Reach horizontal 4,3 m
    • Capacity at full forward reach 1.3 t
    • Lifting height 8.24 m
    • Capacity at full lift hight 3 t
    • Weight 7.6 t
    • Transport length 4.635 m
    • Transport width 2.22 m
    • Transport height 2.44 m
    • Travel speed 20 km/h
    • Engine manuf. Perkins
    • Engine type 1004.42
    • Engine power 62 kW
    • Transmission type ###
    • max. climbing ability ###
    • Dimension lxwxh ###
    • Displacement ###
    • Revolutions at max torque ###
    • Max. torque ###
    • No. of cylinders ###
    • Cylinder bore x stroke ###
    • Emission level ###
    • Cab Position ###
    • Chassis Type ###
    • Levelling - Chassis ###
    • Stabilisers ###
    • Drive - 2W / 4W ###
    • Transmission Type ###
    • Engine Manufacturer ###
    • Engine Model ###
    • Aspiration ###
    • Rated Speed ###
    • Engine Output - Gross ###
    • Tyre - Front Size ###
    • Tyre - Rear Size ###
    • Service Brake - Type ###
    • Service Brake - Location ###
    • Length - Front Of Carriage ###
    • Height - Over Cab ###
    • Width - Operating ###
    • Wheelbase ###
    • Ground Clearance ###
    • Width - Cab ###
    • Lift Height - Maximum ###
    • Reach - Maximum ###
    • Unstabilised Lift Height - With Maximum Capacity ###
    • Turning Radius - Over Tyres ###
    • Breakout Force ###
    • Lift Capacity - Maximum ###
    • Lift Capacity - To Max Height ###
    • Lift Capacity - To Max Reach ###
    • Unstabilised Lift Capacity - Maximum ###
    • Unstabilised Lift Capacity - To Max Height ###
    • Unstabilised Lift Capacity - To Max Reach ###
    • Fuel Tank ###
    • Number Of Boom Sections ###
    • Load Centre ###
    • Lift Capacity - Fork Maximum ###
    • Speed - Forward Maximum ###
    • Operating Weight ###

    All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

    Special equipment

    • Diesel particulate filter
    • StVZO Equipment
    • Inclination correction
    • Side displacement

    Total Cost of Ownership for 3-4t Telehandlers

    Find out if rental works for you:

    Ownership cost (annual): 16730.79 EUR

    Rental cost (annual): 15521.03 EUR

    You can save 8 % by renting a telehandlers

    *Presented prices are sample calculations.

    Customize the calculation
    service provided by ERA

    Compare Merlo P 40.8 K with similar Telehandlers

    Press 1 image

    Merlo P 40.8 K

    Nominal load at COG: 4 t

    Standard tyres: 16/70-20

    Centre of gravity: 500 mm

    Max. Reach horizontal: 4,3 m

    Press 1 image
    Caterpillar TH 82

    Nominal load at COG: 4 t

    Standard tyres: 15.5-25

    Centre of gravity: 500 mm

    Max. Reach horizontal: 4.06 m

    Press 1 image
    Komatsu WH609

    Nominal load at COG: 3.5 t

    Standard tyres: 405/70-24 PR14

    Centre of gravity: 500 mm

    Max. Reach horizontal: 5,2 m

    Press 1 image
    Merlo TF 33.9 CS-120

    Nominal load at COG: 3.3 t

    Standard tyres: 405/70 R24 14 PR

    Centre of gravity: 500 mm

    Max. Reach horizontal: 6,7 m

    Press 1 image
    Weidemann T 5625 CX 80

    Nominal load at COG: 4.1 t

    Standard tyres: 12.5/80-20AS

    Centre of gravity: 500 mm

    Max. Reach horizontal: 3.42 m

    Do you want to see more detailed comparison?

    Show me!

    Sell Merlo P 40.8 K

    Telehandlers appraisal with LECTURA Valuation

    Wether you need to get value of your Merlo P 40.8 K or valuation of your Telehandlers fleet, LECTURA Valuation will help. Simply fill the machine details and see the pricing information for Telehandlers in few clicks.

    Valuate right now!
    Data provided by

    Spare parts & Components

    Get spare parts for Merlo P 40.8 K easily from our partners

    Inquire the spare part you search for from our partners with a few easy steps and choose the best offer. Wether you are a dealer or an owner, LECTURA can point you to the right direction. Order the Telehandlers spare parts easily today - worldwide.

    RAVAS iForks-32 weight scaling solution for your Merlo P 40.8 K

    RAVAS iForks-32

    Successful RAVAS scale forks

    Fit iForks for your Merlo P 40.8 K and realise immediate cost savings

    Functions:

    Gross/net weighing

    Totalling with sequence number

    Weight data transfer to smart phone, tablet, handheld and WMS/ERP system

    Benefits:

    Installation within 5 minutes

    Completely wireless with digital calibration

    More information

    Events & News

    Material Handling News by LECTURA 19.09.2021

    TOBROCO-GIANT expands dealer network
    TOBROCO-GIANT expands dealer network

    The manufacturer TOBROCO-GIANT from the Netherlands is actually changing its structure for sales and support for Austrian customers.

    More industry news Listen to podcast
    X

    What do you think about this machine?

    Merlo products

    Check out 2 Merlo products here

    More about Merlo