The P 28.7 EVT telehandler model is manufactured by Merlo. Find and download detailed specs and data sheets for this machine here.... Read more
The P 28.7 EVT telehandler model is manufactured by Merlo. Find and download detailed specs and data sheets for this machine here.
Equipped with a powerful Perkins engine, this P 28.7 EVT 6.65t machine can provide 84kW or 112 horse power for the telehandler. The Merlo P 28.7 EVT can be grouped in the smallest machine segment in the telehandlers category. 405/70x24 is the size of standard tyres equipped on this Merlo P 28.7 EVT telehandler. The model's features include a max. Horizontal reach of 3,58m 2.8t is its maximum nominal load capacity with a 500mm center of gravity. The P 28.7 EVT has a lift height of 6.95m, to which it can lift 2.8t. At full forward reach, this model can control a weight of 1.1t.
It has been sold without Side displacement, Inclination correction and Diesel particulate filter as of 2001. There are more detailed specifications and machine descriptions available in the original Merlo P 28.7 EVT specs data sheet. Specification sheet is available for a free download in German - providing the machine descriptions and more detailed specs about this particular model.
The production stopped in 2001, where this P 28.7 EVT was available at a new list price between €51,000 and €65,000. For more detailed information about pricing and current residual values, check out the LECTURA Valuation system.
The P 28.7 EVT Merlo can be compared to several models from other manufacturers. The closest telehandlers based on specification and pricing are the Dieci ET 27 HV 7-T, John Deere 4500 TJ and Manitou MT 728-4. At present, 56 other telehandlers, which range from 2.7t up to 12t are produced by Merlo. Of these, TF 50.8 T-120, TF 33.7-115 and also TF 50.8 T-CS-156-CVTRONIC are the most frequently visited on LECTURA Specs. Want more detailed specifications? Download the latest Merlo P 28.7 EVT specs data sheet on LECTURA Specs today!
Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur.Contact our team with any change suggestion.
More technical details, like: model series, transport length, transport width, transport height, travel speed , max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load...
Show moreAll specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel
Use the ERA equipment CO2 Calculator to track the CO2 emissions per hour of use of the Merlo P 28.7 EVT or alternative Telehandlers.
The footprint evaluation can be carried out considering different fuel consumption scenarios or other variables.
or visit the ERA Equipment CO2 Calculator to find out how to optimise your CO2 emissions.
What are the key characteristics of this model?
The 28.7 EVT lifts 2.8 t and reaches a height of 7 m. It is approximately 2.2 m wide and 2.5 m high. Its 4-cylinder engine delivers 84 kW or 114 hp.
What type of job is the machine best suited to do?
The 28.7 is a classic robust loader that is suitable for powerful telescopic operations. It can load in the straw, stack pallets and move bulk goods with a shovel.
Can you name features that differentiates this machine from others?
In the hydraulic system, the pump has a delivery rate of 91 l / min. The loader has a 2-part telescopic arm.
What type of companies is this machine designed for?
The 28.7 can be used in construction, agriculture or municipalities.
LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.
Find out if rental works for you:
Ownership cost (annual): 16730.79 EUR
Rental cost (annual): 15521.03 EUR
You can save 8 % by renting a telehandlers
*Presented prices are sample calculations.
Merlo P 28.7 EVT
Nominal load at COG: 2.8 t
Standard tyres: 405/70x24
Centre of gravity: 500 mm
Transmission type: Hy
Nominal load at COG: 2.8 t
Standard tyres: 17.5 LR 24
Centre of gravity: 500 mm
Transmission type: W
Nominal load at COG: 2.5 t
Standard tyres: 400/70x20
Centre of gravity: 500 mm
Transmission type: HY
Nominal load at COG: 2.5 t
Standard tyres: 12x18
Centre of gravity: 500 mm
Transmission type: HY
Nominal load at COG: 2.5 t
Standard tyres: 400/70-20
Centre of gravity: 500 mm
Transmission type: Hy
Inquire the spare part you look for from our partners with a few easy steps and select the best offer. Wether you are a dealer or an operator, LECTURA can navigate you to the right direction. Order the Telehandlers spare parts easily today - worldwide.
.jpg)
Volvo Penta and FTMH have expanded their partnership to include electric forklifts. This collaboration highlights the trust in Volvo Penta’s modularized electric platform and its full system supplier approach of the latest electromobility technology.
What do you think about this machine?
Check out 2 Merlo products here
.jpg)
.png)
.png)
