Volvo Penta and FTMH have expanded their partnership to include electric forklifts. This collaboration highlights the trust in Volvo Penta’s modularized electric platform and its full system supplier approach of the latest electromobility technology.
.png)
Matbro TS 300 telehandler specs (1997 - 1999)
Matbro is the manufacturer of the telehandler model TS 300. Find and download detailed specs and data sheets for this machine here... Read more
Matbro is the manufacturer of the telehandler model TS 300. Find and download detailed specs and data sheets for this machine here.
The Matbro TS 300 is a 9.98t machine with Perkins engine which powers this model with up to 70kW or 93 horse power. This Matbro telehandler belongs to the biggest machine segment in the telehandlers category. 15.5x25 is the size of standard tyres equipped on this Matbro TS 300 telehandler. It can operate with up to 5,1m of horizontal reach. 4t is its maximum nominal load capacity with a 500mm center of gravity. The TS 300 has a lift height of 9m, to which it can lift 4t. At full forward reach, this model can control a weight of 1t.
It has been sold without StVZO Equipment, Inclination correction and Side displacement as of 1999. Take the original Matbro TS 300 datasheet for even more detailed specifications and machine details.
The newest version of this TS 300 model is priced at between €62,000 and €78,000, with the production of this model stopped in 1999. For more detailed information about pricing and current residual values, check out the LECTURA Valuation system.
The TS 300 Matbro can be compared to several models from other manufacturers. The closest telehandlers based on specification and pricing are the Merlo P 40.8, Manitou MT 940 LTMU and Manitou MT 940 LT. At present, other telehandlers, which range from up to are produced by Matbro. Of these, are the most frequently visited on LECTURA Specs. Want more detailed specifications? Download the latest Matbro TS 300 specs data sheet on LECTURA Specs today!
Technical specs - TS 300 Matbro
Specification
Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur.Contact our team with any change suggestion.
- Nominal load at COG 4 t
- Standard tyres 15.5x25
- Centre of gravity 500 mm
- Transmission type Hy
- Max. Reach horizontal 5,1 m
- Capacity at full forward reach 1 t
- Lifting height 9 m
- Capacity at full lift height 4 t
- Weight 9.98 t
- Engine manuf. Perkins
- Engine type 1004.4T-HR4
- Engine power 70 kW
More technical details, like: model series, transport length, transport width, transport height, travel speed , max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load...
Show moreAll specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel
Special equipment
- Diesel particulate filter
- StVZO Equipment
- Inclination correction
- Side displacement
Carbon footprint calculator for Telehandlers
See the ERA equipment CO2 Calculator to estimate the CO2 emissions per hour of use of the Matbro TS 300 or alternative Telehandlers.
The footprint calculation can be carried out considering different energy consumption scenarios or other variables.
or go to the ERA Equipment CO2 Calculator to find out how to optimise your carbon footprint.
service provided by
Buy & Rent
Used Matbro Telehandlers for sale
LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.
Get in touch for more details:
Total Cost of Ownership for 3-4t Telehandlers
Find out if rental works for you:
Ownership cost (annual): 16730.79 EUR
Rental cost (annual): 15521.03 EUR
You can save 8 % by renting a telehandlers
*Presented prices are sample calculations.
Customize the calculation
service provided by
Compare Matbro TS 300 with similar Telehandlers
Matbro TS 300
Nominal load at COG: 4 t
Standard tyres: 15.5x25
Centre of gravity: 500 mm
Transmission type: Hy
Komatsu WH609
Nominal load at COG: 3.5 t
Standard tyres: 405/70-24 PR14
Centre of gravity: 500 mm
Transmission type: W
Merlo TF 33.9 CS-120
Nominal load at COG: 3.3 t
Standard tyres: 405/70 R24 14 PR
Centre of gravity: 500 mm
Transmission type: HY
Weidemann T 5625 CX 80
Nominal load at COG: 4.1 t
Standard tyres: 12.5/80-20AS
Centre of gravity: 500 mm
Transmission type: HY
Caterpillar TH 82
Nominal load at COG: 4 t
Standard tyres: 15.5-25
Centre of gravity: 500 mm
Transmission type: W
Spare parts & Components
Get spare parts for Matbro TS 300 easily from our partners
Inquire the spare part you search for from our partners with a few easy steps and choose the best offer. Wether you are a dealer or an owner, LECTURA can navigate you to the right direction. Order the Telehandlers spare parts easily today - worldwide.
Events & News
Material Handling News by LECTURA 03.06.2023
.jpg)
Volvo Penta’s modular electric systems triumph in FTMH partnership
X
What do you think about this machine?
Matbro products
Check out 1 Matbro products here