MVT 1135 L Manitou Telehandler Specs & Dimensions (1997 - 1999)

The Manitou MVT 1135 L is a telehandler manufactured by Manitou from 1997 to 1999. It weighs 8.8 tons and has a nominal load capac…

The Manitou MVT 1135 L is a telehandler manufactured by Manitou from 1997 to 1999. It weighs 8.8 tons and has a nominal load capacity of 3.5 tons at the center of gravity. The lifting height is 10.7 meters, and it has a capacity of 2.5 tons at full lift height. The center of gravity is located at 500 millimeters.

Telehandlers Manitou MVT 1135 L

Visit Manitou live at

Technical specs - MVT 1135 L Manitou

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG
3.5 t
Model series
MVT
Centre of gravity
500 mm
Standard tyres
16/70-20
Transmission type
HY
Lifting height
10.7 m
Capacity at full lift height
2.5 t
Weight
8.8 t
Engine manuf.
Perkins
Engine type
1004.4
Engine power
67 kW

More technical details, like: max. reach horizontal, capacity at full forward reach, transport length, transport width, transport height, travel speed, max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load...

More technical details, like: max. reach horizontal, capacity at full forward reach, transport length, transport width, transport height, travel speed, max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, displacement, revolutions at max torque, max. torque, no. of cylinders, cylinder bore x stroke, emission level, cab position, chassis type, levelling - chassis, stabilisers, drive - 2w / 4w, transmission type, engine manufacturer, engine model, aspiration, rated speed, engine output - net, tyre - front size, tyre - rear size, service brake - type, service brake - location, length - front of carriage, height - over cab, width - operating, wheelbase, ground clearance, width - cab, lift height - maximum, reach - maximum, reach - at maximum lift height, unstabilised lift height - with maximum capacity, turning radius - over tyres, lift capacity - maximum, lift capacity - to max height, lift capacity - to max reach, unstabilised lift capacity - maximum, unstabilised lift capacity - to max height, unstabilised lift capacity - to max reach, fuel tank, number of boom sections, load centre, lift capacity - fork maximum, speed - forward maximum, operating weight are available in the full technical specs.

All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

Special equipment

Diesel particulate filter
No
StVZO Equipment
No
Inclination correction
No
Side displacement
No

Events

Visit Manitou live at

NordBau 2026

Holstenhallen Neumünster, Germany

September —
NordBau 2026

Buy & Rent

Used Manitou Telehandlers for sale

LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.

Get in touch for more details:

Used Manitou Telehandlers for sale | Forklift-International
Go to the offers

Compare Manitou MVT 1135 L with similar Telehandlers

Manitou MVT 1135 L

Manitou MVT 1135 L

Nominal load at COG:
3.5 t
Model series:
MVT
Centre of gravity:
500 mm
Standard tyres:
16/70-20
Komatsu WH609

Komatsu WH609

Nominal load at COG:
3.5 t
Model series:
WH
Centre of gravity:
500 mm
Standard tyres:
405/70-24 PR14
Merlo TF 33.9 CS-120

Merlo TF 33.9 CS-120

Nominal load at COG:
3.3 t
Model series:
TF
Centre of gravity:
500 mm
Standard tyres:
405/70 R24 14 PR
Caterpillar TH 82

Caterpillar TH 82

Nominal load at COG:
4 t
Model series:
TH
Centre of gravity:
500 mm
Standard tyres:
15.5-25
Haulotte HTL4014

Haulotte HTL4014

Nominal load at COG:
4 t
Model series:
HTL
Centre of gravity:
500 mm
Standard tyres:
400/80-24

Do you want to see more detailed comparison?

Show me!

Spare parts & Components

Get spare parts for Manitou MVT 1135 L easily from our partners

Spare parts

Do your lookup for high quality parts for Manitou MVT 1135 L online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Telehandlers spare parts easily today - worldwide.

Get parts for Manitou MVT 1135 L now!

Transport

Telehandlers Transport & Shipping Services

In case you look for a transport your machine, take advantage of our services. Check favourable transport quotes for Telehandlers created on dimensions and weight. Our partners provide major services to fit your requirements.

Ask for transport price

Data provided by Lectura logo

News