MT 732 Evolution Manitou Telehandler Specs & Dimensions (2007 - 2015)

The Manitou MT 732 Evolution is a telehandler manufactured from 2007 to 2015. It weighs 7.25 tons and has a maximum horizontal rea…

The Manitou MT 732 Evolution is a telehandler manufactured from 2007 to 2015. It weighs 7.25 tons and has a maximum horizontal reach of 4.16 meters. The nominal load at the center of gravity is 3.2 tons, and it can lift up to a height of 6.9 meters. At full forward reach, it has a capacity of 1.25 tons, and at full lift height, it can handle loads up to 2.8 tons. The center of gravity is located at 500 millimeters.

Telehandlers Manitou MT 732 Evolution
Telehandlers Manitou MT 732 Evolution
Telehandlers Manitou MT 732 Evolution
Telehandlers Manitou MT 732 Evolution
Telehandlers Manitou MT 732 Evolution
Telehandlers Manitou MT 732 Evolution

Visit Manitou live at

Technical specs - MT 732 Evolution Manitou

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG
3.2 t
Model series
MT
Centre of gravity
500 mm
Standard tyres
400/80 -24 156 A8 TL
Transmission type
W
Max. Reach horizontal
4.16 m
Capacity at full forward reach
1.25 t
Lifting height
6.9 m
Capacity at full lift height
2.8 t
Weight
7.25 t
Engine manuf.
Perkins
Engine type
1104C-44
Engine power
61.5 kW
Displacement
4.4 l
Revolutions at max torque
2200 rpm

More technical details, like: transport length, transport width, transport height, travel speed, max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load...

More technical details, like: transport length, transport width, transport height, travel speed, max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, max. torque, no. of cylinders, cylinder bore x stroke, emission level, cab position, chassis type, levelling - chassis, stabilisers, drive - 2w / 4w, transmission type, telematics available, engine manufacturer, engine model, emission rating, aspiration, rated speed, engine output - gross, torque, tyre - front size, tyre - rear size, service brake - type, service brake - location, length - front of carriage, height - over cab, width - operating, wheelbase, ground clearance, width - cab, boom angle - maximum, lift height - maximum, reach - maximum, reach - at maximum lift height, reach - ground with maximum capacity, unstabilised lift height - with maximum capacity, turning radius - over tyres, lift capacity - maximum, lift capacity - to max height, lift capacity - to max reach, unstabilised lift capacity - maximum, unstabilised lift capacity - to max height, unstabilised lift capacity - to max reach, fuel tank, number of boom sections, load centre, lift capacity - fork maximum, raise time - boom, extend time - boom, speed - forward maximum, operating weight are available in the full technical specs.

All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

Special equipment

Diesel particulate filter
No
StVZO Equipment
No
Inclination correction
No
Side displacement
No

Download datasheets (PDF)

Events

Visit Manitou live at

NordBau 2026

Holstenhallen Neumünster, Germany

September —
NordBau 2026

Buy & Rent

Used Manitou Telehandlers for sale

LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.

Get in touch for more details:

Used Manitou Telehandlers for sale | Forklift-International
Go to the offers

Compare Manitou MT 732 Evolution with similar Telehandlers

Manitou MT 732 Evolution

Manitou MT 732 Evolution

Nominal load at COG:
3.2 t
Model series:
MT
Centre of gravity:
500 mm
Standard tyres:
400/80 -24 156 A8 TL
New Holland LM 410

New Holland LM 410

Nominal load at COG:
2.8 t
Model series:
LM
Centre of gravity:
500 mm
Standard tyres:
17.5 LR 24
Komatsu WH609

Komatsu WH609

Nominal load at COG:
3.5 t
Model series:
WH
Centre of gravity:
500 mm
Standard tyres:
405/70-24 PR14
Merlo TF 33.9 CS-120

Merlo TF 33.9 CS-120

Nominal load at COG:
3.3 t
Model series:
TF
Centre of gravity:
500 mm
Standard tyres:
405/70 R24 14 PR
John Deere 4400 TJ

John Deere 4400 TJ

Nominal load at COG:
2.7 t
Model series:
4000
Centre of gravity:
500 mm
Standard tyres:
16.00/70x20

Do you want to see more detailed comparison?

Show me!

Sell Manitou MT 732 Evolution

Telehandlers appraisal with LECTURA Valuation

Valuation

Whether you need to know value of your Manitou MT 732 Evolution or valuation of your Telehandlers fleet, LECTURA Valuation will help. Simply fill the equipment details and see the values for Telehandlers in few clicks.

Valuate right now!

Data provided by Lectura logo

Spare parts & Components

Get spare parts for Manitou MT 732 Evolution easily from our partners

Spare parts

Do your lookup for high quality parts for Manitou MT 732 Evolution online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Telehandlers spare parts easily today - worldwide.

Get parts for Manitou MT 732 Evolution now!

Transport

Telehandlers Transport & Shipping Services

In case you want to transport your machine, take advantage of our services. Examine the most appropriate transport quotes for Telehandlers built on machine's dimensions and weight. Our partners offer various options to satisfy your demands.

Ask for transport price

Data provided by Lectura logo

News