MT 1440 A Manitou Telehandler Specs & Dimensions (2017 - 2020)

The Manitou MT 1440 A is a telehandler manufactured by Manitou from 2017 to 2020. It has a weight of 10.8 tons and a transport len…

The Manitou MT 1440 A is a telehandler manufactured by Manitou from 2017 to 2020. It has a weight of 10.8 tons and a transport length of 6.13 meters. The maximum horizontal reach is 9.38 meters, and it can lift loads up to 4 tons at the nominal load center of gravity. The lifting height is 13.53 meters, and it has a capacity of 1.5 tons at full forward reach. The center of gravity is located at 500 millimeters. The telehandler has a travel speed of 25 km/h and a capacity of 3 tons at full lift height. The transport width is 2.37 meters, and the transport height is 2.45 meters.

Telehandlers Manitou MT 1440 A
Telehandlers Manitou MT 1440 A
Telehandlers Manitou MT 1440 A
Telehandlers Manitou MT 1440 A

Visit Manitou live at

Technical specs - MT 1440 A Manitou

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG
4 t
Model series
MT
Centre of gravity
500 mm
Standard tyres
400/80-25 162A8
Transmission type
W
Max. Reach horizontal
9.38 m
Capacity at full forward reach
1.5 t
Lifting height
13.53 m
Capacity at full lift height
3 t
Weight
10.8 t
Transport length
6.13 m
Transport width
2.37 m
Transport height
2.45 m
Travel speed
25 km/h
Engine manuf.
Perkins
Engine type
1104C-44T
Engine power
74.5 kW
Displacement
3.4 l
Revolutions at max torque
1400 rpm
Max. torque
430 Nm
No. of cylinders
4

More technical details, like: max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, cylinder bore x stroke, emission level, cab position...

More technical details, like: max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, cylinder bore x stroke, emission level, cab position, chassis type, levelling - chassis, stabilisers, drive - 2w / 4w, transmission type, telematics available, engine manufacturer, engine model, emission rating, aspiration, rated speed, engine output - gross, torque, tyre - front size, tyre - rear size, service brake - type, service brake - location, length - front of carriage, height - over cab, width - operating, wheelbase, ground clearance, width - cab, width - stabiliser spread, boom angle - maximum, lift height - maximum, reach - maximum, reach - at maximum lift height, reach - ground with maximum capacity, stabilised lift height - with maximum capacity, turning radius - over tyres, lift capacity - maximum, lift capacity - to max height, lift capacity - to max reach, stabilised lift capacity - maximum, stabilised lift capacity - to max height, stabilised lift capacity - to max reach, fuel tank, number of boom sections, load centre, lift capacity - fork maximum, speed - forward maximum, operating weight are available in the full technical specs.

All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

Special equipment

Diesel particulate filter
No
StVZO Equipment
No
Inclination correction
No
Side displacement
No

Download datasheets (PDF)

Events

Visit Manitou live at

NordBau 2026

Holstenhallen Neumünster, Germany

September —
NordBau 2026

Buy & Rent

Used Manitou Telehandlers for sale

LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.

Get in touch for more details:

Used Manitou Telehandlers for sale | Forklift-International
Go to the offers

Compare Manitou MT 1440 A with similar Telehandlers

Manitou MT 1440 A

Manitou MT 1440 A

Nominal load at COG:
4 t
Model series:
MT
Centre of gravity:
500 mm
Standard tyres:
400/80-25 162A8
Komatsu WH609

Komatsu WH609

Nominal load at COG:
3.5 t
Model series:
WH
Centre of gravity:
500 mm
Standard tyres:
405/70-24 PR14
Merlo TF 33.9 CS-120

Merlo TF 33.9 CS-120

Nominal load at COG:
3.3 t
Model series:
TF
Centre of gravity:
500 mm
Standard tyres:
405/70 R24 14 PR
Sennebogen 305 XL

Sennebogen 305 XL

Nominal load at COG:
4.5 t
Model series:
XL
Centre of gravity:
600 mm
Standard tyres:
405/70 R10
Caterpillar TH 82

Caterpillar TH 82

Nominal load at COG:
4 t
Model series:
TH
Centre of gravity:
500 mm
Standard tyres:
15.5-25

Do you want to see more detailed comparison?

Show me!

Sell Manitou MT 1440 A

Telehandlers appraisal with LECTURA Valuation

Valuation

Whether you need to calculate value of your Manitou MT 1440 A or valuation of your Telehandlers fleet, LECTURA Valuation will help. Simply fill the form and see the pricing information for Telehandlers in few clicks.

Valuate right now!

Data provided by Lectura logo

Spare parts & Components

Get spare parts for Manitou MT 1440 A easily from our partners

Spare parts

Do your lookup for high quality parts for Manitou MT 1440 A online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Telehandlers spare parts easily today - worldwide.

Get parts for Manitou MT 1440 A now!

Transport

Telehandlers Transport & Shipping Services

In case you look for a transport your machine, take advantage of our services. Search for the best fitting transport quotes for Telehandlers formed on dimensions and weight. Our partners provide major options to satisfy your wishes.

Ask for transport price

Data provided by Lectura logo

News