MT 1435 Easy Manitou Telehandler Specs & Dimensions (2015 - 2020)

The Manitou MT 1435 Easy is a telehandler manufactured by Manitou from 2015 to 2020. It has a weight of 9.7 tons and a transport l…

The Manitou MT 1435 Easy is a telehandler manufactured by Manitou from 2015 to 2020. It has a weight of 9.7 tons and a transport length of 6.13 meters. The maximum horizontal reach is 9.42 meters, and it can lift loads up to 3.5 tons at the nominal load center of gravity. The lifting height is 13.52 meters. At full forward reach, it has a capacity of 0.95 tons, and at full lift height, it can handle loads up to 3 tons. The telehandler has a transport width of 2.37 meters and a transport height of 2.45 meters.

Telehandlers Manitou MT 1435 Easy

Visit Manitou live at

Technical specs - MT 1435 Easy Manitou

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG
3.5 t
Model series
MT
Centre of gravity
500 mm
Standard tyres
400/80-24
Transmission type
W
Max. Reach horizontal
9.42 m
Capacity at full forward reach
0.95 t
Lifting height
13.52 m
Capacity at full lift height
3 t
Weight
9.7 t
Transport length
6.13 m
Transport width
2.37 m
Transport height
2.45 m
Engine manuf.
Deutz
Engine type
854E-E34T
Engine power
55.4 kW
Displacement
3.621 l
Max. torque
330 Nm

More technical details, like: travel speed, max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, revolutions at max torque, no. of cylinders...

More technical details, like: travel speed, max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, revolutions at max torque, no. of cylinders, cylinder bore x stroke, emission level, cab position, chassis type, levelling - chassis, stabilisers, drive - 2w / 4w, transmission type, telematics available, engine manufacturer, engine model, emission rating, aspiration, rated speed, engine output - gross, torque, tyre - front size, tyre - rear size, service brake - type, service brake - location, length - front of carriage, height - over cab, width - operating, wheelbase, ground clearance, width - cab, width - stabiliser spread, boom angle - maximum, lift height - maximum, reach - maximum, reach - at maximum lift height, reach - ground with maximum capacity, stabilised lift height - with maximum capacity, turning radius - over tyres, lift capacity - maximum, lift capacity - to max height, lift capacity - to max reach, stabilised lift capacity - maximum, stabilised lift capacity - to max height, stabilised lift capacity - to max reach, fuel tank, number of boom sections, load centre, lift capacity - fork maximum, raise time - boom, extend time - boom, speed - forward maximum, operating weight are available in the full technical specs.

All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

Special equipment

Diesel particulate filter
No
StVZO Equipment
No
Inclination correction
No
Side displacement
No

Download datasheets (PDF)

Events

Visit Manitou live at

NordBau 2026

Holstenhallen Neumünster, Germany

September —
NordBau 2026

Buy & Rent

Used Manitou Telehandlers for sale

LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.

Get in touch for more details:

Used Manitou Telehandlers for sale | Forklift-International
Go to the offers

Compare Manitou MT 1435 Easy with similar Telehandlers

Manitou MT 1435 Easy

Manitou MT 1435 Easy

Nominal load at COG:
3.5 t
Model series:
MT
Centre of gravity:
500 mm
Standard tyres:
400/80-24
Komatsu WH609

Komatsu WH609

Nominal load at COG:
3.5 t
Model series:
WH
Centre of gravity:
500 mm
Standard tyres:
405/70-24 PR14
Merlo TF 33.9 CS-120

Merlo TF 33.9 CS-120

Nominal load at COG:
3.3 t
Model series:
TF
Centre of gravity:
500 mm
Standard tyres:
405/70 R24 14 PR
Caterpillar TH 82

Caterpillar TH 82

Nominal load at COG:
4 t
Model series:
TH
Centre of gravity:
500 mm
Standard tyres:
15.5-25
Haulotte HTL4014

Haulotte HTL4014

Nominal load at COG:
4 t
Model series:
HTL
Centre of gravity:
500 mm
Standard tyres:
400/80-24

Do you want to see more detailed comparison?

Show me!

Sell Manitou MT 1435 Easy

Telehandlers appraisal with LECTURA Valuation

Valuation

Whether you need to know value of your Manitou MT 1435 Easy or valuation of your Telehandlers fleet, LECTURA Valuation will help. Simply fill the machine details and see the pricing information for Telehandlers in few clicks.

Valuate right now!

Data provided by Lectura logo

Spare parts & Components

Get spare parts for Manitou MT 1435 Easy easily from our partners

Spare parts

Do your lookup for high quality parts for Manitou MT 1435 Easy online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Telehandlers spare parts easily today - worldwide.

Get parts for Manitou MT 1435 Easy now!

Transport

Telehandlers Transport & Shipping Services

In case you want to transport your machine, apply our services. Query the ideal transport quotes for Telehandlers created on transport dimensions and weights. Our partners offer large-scale services to meet your requirements.

Ask for transport price

Data provided by Lectura logo

News