Manufacturer

    All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts Telehandlers Telehandlers Manitou Manitou MT 1135 Easy specifications

    Total Cost of Ownership for 3-4t Telehandlers

    BUY (Annual Ownership Cost): 16 730.79 € RENTAL COST (Annual Rental Cost): 15 521.03 €.

    Customize the calculation *Presented prices are sample calculations.

    Provided by

    Technical specs - MT 1135 Easy Manitou

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    Nominal load at COG 3.5 t
    Standard tyres 400/80-24
    Centre of gravity 500 mm
    Transmission type HY
    Max. Reach horizontal 7.75 m
    Capacity at full forward reach 0.4 t
    Lifting height 11.05 m
    Capacity at full lift hight 3.5 t
    Weight 8.9 t
    Transport length 5.37 m
    Transport width 2.28 m
    Transport height 2.42 m
    Travel speed 25 km/h
    Engine manuf. Perkins
    Engine type 854F-E34TA
    Engine power 75 kW
    Engine power 100 HP
    Max. torque 430 Nm
    Emission level Tier 4 f
    max. climbing ability ###
    Dimension lxwxh ###
    Displacement ###
    Revolutions at max torque ###
    No. of cylinders ###
    Cylinder bore x stroke ###
    Weight ###
    Cab Position ###
    Chassis Type ###
    Levelling - Chassis ###
    Stabilisers ###
    Drive - 2W / 4W ###
    Transmission Type ###
    Attachment Quickhitch ###
    Telematics Available ###
    Platform ###
    Engine Manufacturer ###
    Engine Model ###
    Emission Rating ###
    Aspiration ###
    Engine Output - Gross ###
    Torque ###
    Tyre - Front Size ###
    Tyre - Rear Size ###
    Service Brake - Type ###
    Service Brake - Location ###
    Length - Front Of Carriage ###
    Height - Over Cab ###
    Width - Operating ###
    Wheelbase ###
    Ground Clearance ###
    Width - Cab ###
    Lift Height - Maximum ###
    Reach - Maximum ###
    Unstabilised Lift Height - With Maximum Capacity ###
    Stabilised Lift Height - With Maximum Capacity ###
    Turning Radius - Over Tyres ###
    Breakout Force ###
    Lift Capacity - Maximum ###
    Lift Capacity - To Max Height ###
    Lift Capacity - To Max Reach ###
    Unstabilised Lift Capacity - Maximum ###
    Unstabilised Lift Capacity - To Max Height ###
    Unstabilised Lift Capacity - To Max Reach ###
    Stabilised Lift Capacity - Maximum ###
    Stabilised Lift Capacity - To Max Height ###
    Stabilised Lift Capacity - To Max Reach ###
    Fuel Tank ###
    Number Of Boom Sections ###
    Load Centre ###
    Lift Capacity - Fork Maximum ###
    Raise Time - Boom ###
    Extend Time - Boom ###
    Speed - Forward Maximum ###
    Speed - Reverse Maximum ###
    Operating Weight ###

    All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

    MT 1135 Easy Manitou - Special equipment

    • Diesel particulate filter
    • StVZO Equipment
    • Inclination correction
    • Side displacement

    RAVAS iForks-32 weight scaling solution for your Manitou MT 1135 Easy

    RAVAS iForks-32

    Successful RAVAS scale forks

    Fit iForks for your Manitou MT 1135 Easy and realise immediate cost savings

    Functions:

    Gross/net weighing

    Totalling with sequence number

    Weight data transfer to smart phone, tablet, handheld and WMS/ERP system

    Benefits:

    Installation within 5 minutes

    Completely wireless with digital calibration

    More information

    Download data sheets - Manitou MT 1135 Easy

    X

    What do you think about this machine?


    Compare Manitou MT 1135 Easy with other models

    Press 1 image

    Manitou MT 1135 Easy

    3.5t

    400/80-24

    500 mm

    Manitou products

    Check out 21 Manitou products here

    More about Manitou

    Material Handling News by LECTURA 01.12.2020

    Weekly overview 23.11.-27.11. 2020
    Weekly overview 23.11.-27.11. 2020

    Weekly overview of interesting news from heavy machinery industry.

    More industry news