The Manitou MT 1030 ST Evolution is a telehandler manufactured from 2007 to 2014. It weighs 7.47 tons and has a maximum horizontal…
The Manitou MT 1030 ST Evolution is a telehandler manufactured from 2007 to 2014. It weighs 7.47 tons and has a maximum horizontal reach of 7.15 meters. The nominal load at the center of gravity is 3 tons, and it can lift up to a height of 10 meters. At full forward reach, it has a capacity of 0.85 tons, and at full lift height, it can handle loads up to 2.5 tons. The center of gravity is located at 500 millimeters.
More technical details, like: transport length, transport width, transport height, travel speed, max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load...
More technical details, like: transport length, transport width, transport height, travel speed, max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, displacement, revolutions at max torque, max. torque, no. of cylinders, cylinder bore x stroke, emission level, cab position, chassis type, levelling - chassis, stabilisers, drive - 2w / 4w, transmission type, telematics available, engine manufacturer, engine model, emission rating, aspiration, rated speed, engine output - gross, torque, tyre - front size, tyre - rear size, service brake - type, service brake - location, length - front of carriage, height - over cab, width - operating, wheelbase, ground clearance, width - cab, width - stabiliser spread, boom angle - maximum, lift height - maximum, reach - maximum, reach - at maximum lift height, reach - ground with maximum capacity, stabilised lift height - with maximum capacity, turning radius - over tyres, lift capacity - maximum, lift capacity - to max height, lift capacity - to max reach, stabilised lift capacity - maximum, stabilised lift capacity - to max height, stabilised lift capacity - to max reach, fuel tank, number of boom sections, load centre, lift capacity - fork maximum, raise time - boom, extend time - boom, speed - forward maximum, operating weight are available in the full technical specs.
All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel
95 or 101 HP Perkins Engine and torque converter transmission driving a 4 speed gear box, perfectly suited for travelling on the road. 8200 daN (S) or 8300 daN (ST) drawbar pull enabling fast achievement of any loading task. Hydraulic Pump operating at 250 bars and supplying a 105 l/m flow. Simultaneous use of hydraulic functions and 5350 daN tear out force.
Efficient on site
Dual lever system fitted directly on valve bank. Transmission cut off switch allocating all the engine power to hydraulic performances. In addition, the forward/reverse selector is now integrated into the LPS, allowing the operator to keep the left hand on the steering wheel for greater safety.
Basic dimensions
Compactness and Manoeuvrability
Overall length up to carriage under 5 m and short rear overhang offer all the compactness and manoeuverability required in confined sites. Turning radius of 3.75 m for easy manoeuvering. Proportional and independant stabilizers lowering on a 2.21 m width. Ideal in restricted spaces with minimum damage to the surface.
LECTURA analyzes fresh deals from many sources about Telehandlers. Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.
Whether you need to get value of your Manitou MT 1030 ST Evolution or valuation of your Telehandlers fleet, LECTURA Valuation will help. Simply fill the equipment details and see the values for Telehandlers in few clicks.
Get spare parts for Manitou MT 1030 ST Evolution easily from our partners
Do your lookup for high quality parts for Manitou MT 1030 ST Evolution online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Telehandlers spare parts easily today - worldwide.
In case you want a transport for your machine, take advantage of our services. Query the most appropriate transport quotes for Telehandlers built on dimensions and weight. Our partners provide major services to satisfy your demands.
LECTURA, a heavy machinery intelligence leader and technical data expert, has entered into a strategic partnership with Rental-Portal, a specialised digital marketplace for machinery hire. The collaboration connects in-depth equipment research directly with rental availability, offering professionals a seamless route from machine comparison to immediate rental.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.png)
.jpg)
.png)