MLT 1040-145 PS Manitou Telehandler Specs & Dimensions (2017 - 2020)

The Manitou MLT 1040-145 PS is a telehandler manufactured by Manitou from 2017 to 2020. It weighs 9.175 tons and has a transport l…

The Manitou MLT 1040-145 PS is a telehandler manufactured by Manitou from 2017 to 2020. It weighs 9.175 tons and has a transport length of 5.17 meters. With a maximum horizontal reach of 6.55 meters, it can lift loads up to 4 tons at the nominal load center of gravity of 500mm. The lifting height of this telehandler is 9.6 meters. It has a capacity of 0.8 tons at full forward reach and 0.6 tons at full lift height. The transport width is 2.39 meters and the transport height is 2.38 meters.

Visit Manitou live at

Technical specs - MLT 1040-145 PS Manitou

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG
4 t
Model series
MLT
Centre of gravity
500 mm
Max. Reach horizontal
6.55 m
Capacity at full forward reach
0.8 t
Lifting height
9.6 m
Capacity at full lift height
0.6 t
Weight
9.175 t
Transport length
5.17 m
Transport width
2.39 m
Transport height
2.38 m
Engine manuf.
John Deere
Engine type
k.A.
Engine power
104 kW
Displacement
4.5 l
Revolutions at max torque
1600 rpm
Max. torque
540 Nm
No. of cylinders
4
Emission level
Tier 4 f

More technical details, like: standard tyres, transmission type, travel speed, max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh...

More technical details, like: standard tyres, transmission type, travel speed, max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, cylinder bore x stroke, cab position, chassis type, levelling - chassis, stabilisers, drive - 2w / 4w, transmission type, attachment quickhitch, telematics available, platform, engine manufacturer, engine model, emission rating, aspiration, rated speed, engine output - gross, torque, tyre - front size, tyre - rear size, service brake - type, service brake - location, length - front of carriage, height - over cab, width - operating, wheelbase, ground clearance, width - cab, boom angle - maximum, lift height - maximum, reach - maximum, reach - at maximum lift height, reach - ground with maximum capacity, unstabilised lift height - with maximum capacity, turning radius - over tyres, lift capacity - maximum, lift capacity - to max height, lift capacity - to max reach, unstabilised lift capacity - maximum, unstabilised lift capacity - to max height, unstabilised lift capacity - to max reach, fuel tank, number of boom sections, load centre, lift capacity - fork maximum, raise time - boom, extend time - boom, speed - forward maximum, operating weight are available in the full technical specs.

All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

Special equipment

Diesel particulate filter
No
StVZO Equipment
No
Inclination correction
No
Side displacement
No

Download datasheets (PDF)

Events

Visit Manitou live at

NordBau 2026

Holstenhallen Neumünster, Germany

September
NordBau 2026

Buy & Rent

Used Manitou Telehandlers for sale

LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.

Get in touch for more details:

Compare Manitou MLT 1040-145 PS with similar Telehandlers

Manitou MLT 1040-145 PS

Manitou MLT 1040-145 PS

Nominal load at COG:
4 t
Model series:
MLT
Centre of gravity:
500 mm
Max. Reach horizontal:
6.55 m
Komatsu WH609

Komatsu WH609

Nominal load at COG:
3.5 t
Model series:
WH
Centre of gravity:
500 mm
Max. Reach horizontal:
5.2 m
Merlo TF 33.9 CS-120

Merlo TF 33.9 CS-120

Nominal load at COG:
3.3 t
Model series:
TF
Centre of gravity:
500 mm
Max. Reach horizontal:
6.7 m
Sennebogen 305 XL

Sennebogen 305 XL

Nominal load at COG:
4.5 t
Model series:
XL
Centre of gravity:
600 mm
Max. Reach horizontal:
5.6 m
Caterpillar TH 82

Caterpillar TH 82

Nominal load at COG:
4 t
Model series:
TH
Centre of gravity:
500 mm
Max. Reach horizontal:
4.06 m

Do you want to see more detailed comparison?

Show me!

Sell Manitou MLT 1040-145 PS

Telehandlers appraisal with LECTURA Valuation

Valuation

Whether you need to get value of your Manitou MLT 1040-145 PS or valuation of your Telehandlers fleet, LECTURA Valuation will help. Simply fill the machine details and see the pricing information for Telehandlers in few clicks.

Data provided by Lectura logo

Spare parts & Components

Get spare parts for Manitou MLT 1040-145 PS easily from our partners

Spare parts

Do your lookup for high quality parts for Manitou MLT 1040-145 PS online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Telehandlers spare parts easily today - worldwide.

Transport

Telehandlers Transport & Shipping Services

In case you look into transport options for your machine, apply our services. Query the ideal transport quotes for Telehandlers formed on transport dimensions and weight. Our partners provide comprehensive services to meet your wishes.

Data provided by Lectura logo

News