G 10-43 A JLG Telehandler Specs & Dimensions (2010 - 2012)

The JLG G 10-43 A telehandler, manufactured from 2010 to 2012, has a weight of 12.157 tons and a transport length of 5.9 meters. I…

The JLG G 10-43 A telehandler, manufactured from 2010 to 2012, has a weight of 12.157 tons and a transport length of 5.9 meters. It has a nominal load at the center of gravity of 4.536 tons and a lifting height of 13.1 meters. The capacity at full forward reach is 1.225 tons and the center of gravity is at 610 millimeters. It has a capacity of 3.175 tons at full lift height. The transport width is 2.5 meters and the transport height is 2.43 meters.

Technical specs - G 10-43 A JLG

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG
4.536 t
Model series
G
Centre of gravity
610 mm
Standard tyres
400/75-28
Transmission type
W
Max. Reach horizontal
9.3 m
Capacity at full forward reach
1.225 t
Lifting height
13.1 m
Capacity at full lift height
3.175 t
Weight
12.157 t
Transport length
5.9 m
Transport width
2.5 m
Transport height
2.43 m
Travel speed
31.4 km/h
Engine manuf.
Cummins
Engine type
QSB3.3T
Engine power
74 kW
Displacement
3.3 l
Revolutions at max torque
2200 rpm
Emission level
Tier 3

More technical details, like: max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, max. torque, no. of cylinders, cylinder bore x stroke...

More technical details, like: max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, max. torque, no. of cylinders, cylinder bore x stroke, cab position, chassis type, levelling - chassis, stabilisers, drive - 2w / 4w, transmission type, engine manufacturer, engine model, emission rating, aspiration, rated speed, engine output - gross, torque, tyre - front size, tyre - rear size, tyre 2 - front size option, tyre 2 - rear size option, service brake - type, service brake - location, length - front of carriage, height - over cab, width - operating, wheelbase, ground clearance, boom angle - maximum, lift height - maximum, reach - maximum, reach - at maximum lift height, reach - ground with maximum capacity, unstabilised lift height - with maximum capacity, stabilised lift height - with maximum capacity, turning radius - over tyres, lift capacity - maximum, lift capacity - to max height, lift capacity - to max reach, unstabilised lift capacity - maximum, unstabilised lift capacity - to max height, unstabilised lift capacity - to max reach, stabilised lift capacity - maximum, stabilised lift capacity - to max height, stabilised lift capacity - to max reach, fuel tank, number of boom sections, load centre, lift capacity - fork maximum, raise time - boom, extend time - boom, speed - forward maximum, operating weight are available in the full technical specs.

All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

Special equipment

Diesel particulate filter
No
StVZO Equipment
No
Inclination correction
No
Side displacement
No

Download datasheets (PDF)

Buy & Rent

Used JLG Telehandlers for sale

LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.

Get in touch for more details:

Compare JLG G 10-43 A with similar Telehandlers

JLG G 10-43 A

JLG G 10-43 A

Nominal load at COG:
4.536 t
Model series:
G
Centre of gravity:
610 mm
Standard tyres:
400/75-28
Sennebogen 305 XL

Sennebogen 305 XL

Nominal load at COG:
4.5 t
Model series:
XL
Centre of gravity:
600 mm
Standard tyres:
405/70 R10
Caterpillar TH 82

Caterpillar TH 82

Nominal load at COG:
4 t
Model series:
TH
Centre of gravity:
500 mm
Standard tyres:
15.5-25
Haulotte HTL4014

Haulotte HTL4014

Nominal load at COG:
4 t
Model series:
HTL
Centre of gravity:
500 mm
Standard tyres:
400/80-24
Skyjack SJ1056 TH

Skyjack SJ1056 TH

Nominal load at COG:
4.535 t
Model series:
SJ
Centre of gravity:
500 mm
Standard tyres:
14x24 16 PR

Do you want to see more detailed comparison?

Show me!

Sell JLG G 10-43 A

Telehandlers appraisal with LECTURA Valuation

Valuation

Whether you need to see value of your JLG G 10-43 A or valuation of your Telehandlers fleet, LECTURA Valuation will help. Simply fill the machine information and see the values for Telehandlers in few clicks.

Data provided by Lectura logo

Spare parts & Components

Get spare parts for JLG G 10-43 A easily from our partners

Spare parts

Do your lookup for high quality parts for JLG G 10-43 A online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Telehandlers spare parts easily today - worldwide.

Transport

Telehandlers Transport & Shipping Services

In case you need to transport your machine, apply our services. Query favourable transport quotes for Telehandlers built on transport dimensions and weights. Our partners provide large-scale services to fit your demands.

Data provided by Lectura logo

News

Material Handling News by LECTURA 03.08.2026