Skyjack SJ1056 TH telehandler specs (2016 - 2025)

The Skyjack SJ1056 TH is a telehandler manufactured since 2016. It has a weight of 14.288 tons and a transport length of 6.75 mete…

The Skyjack SJ1056 TH is a telehandler manufactured since 2016. It has a weight of 14.288 tons and a transport length of 6.75 meters. With a maximum horizontal reach of 12.95 meters, it can handle a nominal load of 4.535 tons at the center of gravity, and has a lifting height of 17.14 meters. At full forward reach, it can carry a capacity of 0.181 tons, and at full lift height, it can handle 1.814 tons. The telehandler has a center of gravity at 500 mm and a travel speed of 24 km/h. Its transport width is 2.56 meters and transport height is 2.47 meters.

Technical specs - SJ1056 TH Skyjack

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG
4.535 t
Model series
SJ
Centre of gravity
500 mm
Standard tyres
14x24 16 PR
Max. Reach horizontal
12.95 m
Capacity at full forward reach
0.181 t
Lifting height
17.14 m
Capacity at full lift height
1.814 t
Weight
14.288 t
Transport length
6.75 m
Transport width
2.56 m
Transport height
2.47 m
Travel speed
24 km/h
Engine manuf.
Deutz
Engine type
TCD3.6L
Engine power
55 kW
Emission level
Tier 4 f

More technical details, like: transmission type, max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, displacement, revolutions at max torque...

More technical details, like: transmission type, max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, displacement, revolutions at max torque, max. torque, no. of cylinders, cylinder bore x stroke, cab position, chassis type, levelling - chassis, stabilisers, drive - 2w / 4w, transmission type, attachment quickhitch, telematics available, platform, engine manufacturer, engine model, emission rating, aspiration, engine output - gross, torque, tyre - front size, tyre - rear size, tyre 2 - front size option, tyre 2 - rear size option, dimension configuration, length - front of carriage, height - over cab, width - operating, ground clearance, boom angle - maximum, lift height - maximum, reach - maximum, reach - at maximum lift height, reach - ground with maximum capacity, unstabilised lift height - with maximum capacity, stabilised lift height - with maximum capacity, turning radius - over tyres, lift capacity - maximum, lift capacity - to max height, lift capacity - to max reach, unstabilised lift capacity - maximum, unstabilised lift capacity - to max height, unstabilised lift capacity - to max reach, stabilised lift capacity - maximum, stabilised lift capacity - to max height, stabilised lift capacity - to max reach, fuel tank, number of boom sections, lift capacity - fork maximum, speed - forward maximum, operating weight are available in the full technical specs.

All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

Special equipment

Diesel particulate filter
No
StVZO Equipment
No
Inclination correction
No
Side displacement
No

Download datasheets (PDF)

Buy & Rent

Used Skyjack Telehandlers for sale

LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.

Get in touch for more details:

Compare Skyjack SJ1056 TH with similar Telehandlers

Skyjack SJ1056 TH

Skyjack SJ1056 TH

Nominal load at COG:
4.535 t
Model series:
SJ
Centre of gravity:
500 mm
Standard tyres:
14x24 16 PR
Caterpillar TH 82

Caterpillar TH 82

Nominal load at COG:
4 t
Model series:
TH
Centre of gravity:
500 mm
Standard tyres:
15.5-25
Sennebogen 305 XL

Sennebogen 305 XL

Nominal load at COG:
4.5 t
Model series:
XL
Centre of gravity:
600 mm
Standard tyres:
405/70 R10
Haulotte HTL4014

Haulotte HTL4014

Nominal load at COG:
4 t
Model series:
HTL
Centre of gravity:
500 mm
Standard tyres:
400/80-24
Skyjack SJ1056 TH

Skyjack SJ1056 TH

Nominal load at COG:
4.535 t
Model series:
SJ
Centre of gravity:
500 mm
Standard tyres:
14x24 16 PR

Do you want to see more detailed comparison?

Show me!

Sell Skyjack SJ1056 TH

Telehandlers appraisal with LECTURA Valuation

Valuation

Whether you need to get value of your Skyjack SJ1056 TH or valuation of your Telehandlers fleet, LECTURA Valuation will help. Simply fill the equipment details and see the values for Telehandlers in few clicks.

Valuation

Data provided by Lectura logo

Spare parts & Components

Get spare parts for Skyjack SJ1056 TH easily from our partners

Spare parts

Do your lookup for high quality parts for Skyjack SJ1056 TH online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Telehandlers spare parts easily today - worldwide.

Spare parts

Transport

Telehandlers Transport & Shipping Services

In case you look into transport options for your machine, take advantage of our services. Query the most appropriate transport quotes for Telehandlers built on dimensions and weight. Our partners provide major services to satisfy your demands.

Data provided by Lectura logo

Events & News

Material Handling News by LECTURA 12.02.2025

This website uses cookies

We use cookies in order to ensure the best and most relevant web-experience on LECTURA. We personalize the website content and tailored ads based on your given interest in specific topics. By clicking the button “Understand & proceed” you additionally consent to the use of cookies that allow for personalized retargeting ads on third party websites based on your interests in accordance with our privacy policy.