4012 JLG Telehandler Specs & Dimensions (2002 - 2006)

The JLG 4012 is a telehandler manufactured by JLG from 2002 to 2006. It has a weight of 10.7 tons and a transport length of 5.79 m…

The JLG 4012 is a telehandler manufactured by JLG from 2002 to 2006. It has a weight of 10.7 tons and a transport length of 5.79 meters. The telehandler has a nominal load at the center of gravity of 4 tons and a lifting height of 11.5 meters. It has a capacity of 1.4 tons at full forward reach and 4 tons at full lift height. The center of gravity is located at 500 millimeters. The transport width is 2.38 meters and the transport height is 2.45 meters.

Telehandlers JLG 4012

Technical specs - 4012 JLG

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG
4 t
Centre of gravity
500 mm
Standard tyres
405/70-24
Transmission type
W
Max. Reach horizontal
7.9 m
Capacity at full forward reach
1.4 t
Lifting height
11.5 m
Capacity at full lift height
4 t
Weight
10.7 t
Transport length
5.79 m
Transport width
2.38 m
Transport height
2.45 m
Engine manuf.
Perkins
Engine type
1004.44T
Engine power
60 kW

More technical details, like: model series, travel speed, max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, displacement...

More technical details, like: model series, travel speed, max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, displacement, revolutions at max torque, max. torque, no. of cylinders, cylinder bore x stroke, emission level, cab position, chassis type, levelling - chassis, stabilisers, drive - 2w / 4w, transmission type, engine manufacturer, engine model, aspiration, rated speed, engine output - gross, tyre - front size, tyre - rear size, service brake - type, service brake - location, length - front of carriage, height - over cab, width - operating, wheelbase, ground clearance, width - cab, width - stabiliser spread, boom angle - maximum, lift height - maximum, reach - maximum, reach - at maximum lift height, unstabilised lift height - with maximum capacity, stabilised lift height - with maximum capacity, turning radius - over tyres, breakout force, lift capacity - maximum, lift capacity - to max height, lift capacity - to max reach, unstabilised lift capacity - maximum, unstabilised lift capacity - to max height, unstabilised lift capacity - to max reach, stabilised lift capacity - maximum, stabilised lift capacity - to max height, stabilised lift capacity - to max reach, fuel tank, load centre, lift capacity - fork maximum, speed - forward maximum, operating weight are available in the full technical specs.

All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

Special equipment

Diesel particulate filter
No
StVZO Equipment
No
Inclination correction
No
Side displacement
No

Buy & Rent

Used JLG Telehandlers for sale

LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.

Get in touch for more details:

Used JLG Telehandlers for sale | Forklift-International
Go to the offers

Compare JLG 4012 with similar Telehandlers

JLG 4012

JLG 4012

Nominal load at COG:
4 t
Centre of gravity:
500 mm
Standard tyres:
405/70-24
Transmission type:
W
Komatsu WH609

Komatsu WH609

Nominal load at COG:
3.5 t
Centre of gravity:
500 mm
Standard tyres:
405/70-24 PR14
Transmission type:
W
Merlo TF 33.9 CS-120

Merlo TF 33.9 CS-120

Nominal load at COG:
3.3 t
Centre of gravity:
500 mm
Standard tyres:
405/70 R24 14 PR
Transmission type:
HY
Sennebogen 305 XL

Sennebogen 305 XL

Nominal load at COG:
4.5 t
Centre of gravity:
600 mm
Standard tyres:
405/70 R10
Caterpillar TH 82

Caterpillar TH 82

Nominal load at COG:
4 t
Centre of gravity:
500 mm
Standard tyres:
15.5-25
Transmission type:
W

Do you want to see more detailed comparison?

Show me!

Spare parts & Components

Get spare parts for JLG 4012 easily from our partners

Spare parts

Do your lookup for high quality parts for JLG 4012 online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Telehandlers spare parts easily today - worldwide.

Get parts for JLG 4012 now!

Transport

Telehandlers Transport & Shipping Services

In case you look for a transport your machine, utilise our services. Ask for the ideal transport quotes for Telehandlers built on transport dimensions and machine weight. Our partners provide extensive options to meet your demands.

Ask for transport price

Data provided by Lectura logo

News