TLT 35 D 4x4 JCB Telehandler Specs & Dimensions (2005 - 2008)

The JCB TLT 35 D 4x4 telehandler, manufactured from 2005 to 2008, weighs 5.5 tons. It has a maximum horizontal reach of 2.45 meter…

The JCB TLT 35 D 4x4 telehandler, manufactured from 2005 to 2008, weighs 5.5 tons. It has a maximum horizontal reach of 2.45 meters and a lifting height of 4.35 meters. The nominal load at the center of gravity is 3.5 tons, while the capacity at full forward reach is 1.5 tons. The telehandler has a center of gravity at 500 millimeters. It can climb slopes with a maximum gradient of 25 percent. The capacity at full lift height is 2.75 tons. The travel speed of the telehandler is 20 km/h with or without a load.

Telehandlers JCB TLT 35 D 4x4

Visit JCB live at

Technical specs - TLT 35 D 4x4 JCB

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG
3.5 t
Model series
TLT
Centre of gravity
500 mm
Standard tyres
4x2
Transmission type
HY
Max. Reach horizontal
2.45 m
Capacity at full forward reach
1.5 t
Lifting height
4.35 m
Capacity at full lift height
2.75 t
Weight
5.5 t
max. climbing ability
25 %
Travel speed with / without load
20 km/h
Engine manuf.
JCB
Engine type
D 404 T
Engine power
45 kW

More technical details, like: transport length, transport width, transport height, travel speed, drive system, voltage, traction motor, hoist motor, hoisting with / without load, lowering with load, dimension lxwxh, displacement...

More technical details, like: transport length, transport width, transport height, travel speed, drive system, voltage, traction motor, hoist motor, hoisting with / without load, lowering with load, dimension lxwxh, displacement, revolutions at max torque, max. torque, no. of cylinders, cylinder bore x stroke, emission level, cab position, chassis type, levelling - chassis, stabilisers, drive - 2w / 4w, transmission type, attachment quickhitch, telematics available, platform, engine manufacturer, engine model, emission rating, aspiration, rated speed, engine output - gross, torque, tyre - front size, tyre - rear size, service brake - type, length - front of carriage, height - over cab, width - operating, wheelbase, ground clearance, lift height - maximum, reach - maximum, reach - at maximum lift height, reach - ground with maximum capacity, unstabilised lift height - with maximum capacity, turning radius - over tyres, lift capacity - maximum, lift capacity - to max height, lift capacity - to max reach, unstabilised lift capacity - maximum, unstabilised lift capacity - to max height, unstabilised lift capacity - to max reach, number of boom sections, load centre, lift capacity - fork maximum, speed - forward maximum, operating weight are available in the full technical specs.

All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

Special equipment

Diesel particulate filter
No
StVZO Equipment
No
Inclination correction
No
Side displacement
No

Events

Visit JCB live at

Buy & Rent

Used JCB Telehandlers for sale

LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.

Get in touch for more details:

Compare JCB TLT 35 D 4x4 with similar Telehandlers

JCB TLT 35 D 4x4

JCB TLT 35 D 4x4

Nominal load at COG:
3.5 t
Model series:
TLT
Centre of gravity:
500 mm
Standard tyres:
4x2
Komatsu WH609

Komatsu WH609

Nominal load at COG:
3.5 t
Model series:
WH
Centre of gravity:
500 mm
Standard tyres:
405/70-24 PR14
Merlo TF 33.9 CS-120

Merlo TF 33.9 CS-120

Nominal load at COG:
3.3 t
Model series:
TF
Centre of gravity:
500 mm
Standard tyres:
405/70 R24 14 PR
Caterpillar TH 82

Caterpillar TH 82

Nominal load at COG:
4 t
Model series:
TH
Centre of gravity:
500 mm
Standard tyres:
15.5-25
Haulotte HTL4014

Haulotte HTL4014

Nominal load at COG:
4 t
Model series:
HTL
Centre of gravity:
500 mm
Standard tyres:
400/80-24

Do you want to see more detailed comparison?

Show me!

Spare parts & Components

Get spare parts for JCB TLT 35 D 4x4 easily from our partners

Spare parts

Do your lookup for high quality parts for JCB TLT 35 D 4x4 online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Telehandlers spare parts easily today - worldwide.

Get parts for JCB TLT 35 D 4x4 now!

Transport

Telehandlers Transport & Shipping Services

In case you want to transport your machine, utilise our services. Query the most appropriate transport quotes for Telehandlers created on transport dimensions and machine weight. Our partners offer extensive services to satisfy your requirements.

Ask for transport price

Data provided by Lectura logo

News

Material Handling News by LECTURA 15.07.2026

More industry news