HTL4017 Haulotte Telehandler Specs & Dimensions (2007 - 2018)

Model rating
10,00 / 10

The Haulotte HTL4017 is a telehandler manufactured by Haulotte from 2007 to 2018. It has a weight of 12.1 tons and a transport len…

The Haulotte HTL4017 is a telehandler manufactured by Haulotte from 2007 to 2018. It has a weight of 12.1 tons and a transport length of 6.76 meters. The maximum horizontal reach is 12.85 meters, and it can lift loads up to 4 tons at the nominal load center of gravity of 500mm. The lifting height is 17.2 meters, and it has a capacity of 0.7 tons at full forward reach. The telehandler has a travel speed of 25 km/h. It can handle loads up to 2.5 tons at full lift height. The transport width is 2.43 meters, and the transport height is 2.67 meters. The special equipment included is inclination correction.

Telehandlers Haulotte HTL4017
Telehandlers Haulotte HTL4017
Telehandlers Haulotte HTL4017
Telehandlers Haulotte HTL4017

Technical specs - HTL4017 Haulotte

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG
4 t
Model series
HTL
Centre of gravity
500 mm
Standard tyres
400/80-24
Transmission type
HY
Max. Reach horizontal
12.85 m
Capacity at full forward reach
0.7 t
Lifting height
17.2 m
Capacity at full lift height
2.5 t
Weight
12.1 t
Transport length
6.76 m
Transport width
2.43 m
Transport height
2.67 m
Travel speed
25 km/h
Engine manuf.
Deutz
Engine type
BF4M2012
Engine power
74.9 kW
Displacement
3.4 l
Emission level
Tier 4

More technical details, like: max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, revolutions at max torque, max. torque, no. of cylinders...

More technical details, like: max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, revolutions at max torque, max. torque, no. of cylinders, cylinder bore x stroke, cab position, chassis type, levelling - chassis, stabilisers, drive - 2w / 4w, transmission type, telematics available, engine manufacturer, engine model, aspiration, rated speed, engine output - gross, torque, tyre - front size, tyre - rear size, service brake - type, length - front of carriage, height - over cab, width - operating, wheelbase, ground clearance, width - cab, width - stabiliser spread, boom angle - maximum, lift height - maximum, reach - maximum, reach - at maximum lift height, reach - ground with maximum capacity, unstabilised lift height - with maximum capacity, stabilised lift height - with maximum capacity, turning radius - over tyres, lift capacity - maximum, lift capacity - to max height, lift capacity - to max reach, unstabilised lift capacity - maximum, unstabilised lift capacity - to max height, unstabilised lift capacity - to max reach, stabilised lift capacity - maximum, stabilised lift capacity - to max height, stabilised lift capacity - to max reach, fuel tank, number of boom sections, load centre, lift capacity - fork maximum, speed - forward maximum, operating weight are available in the full technical specs.

All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

Special equipment

Diesel particulate filter
No
StVZO Equipment
No
Inclination correction
Yes
Side displacement
No

Download datasheets (PDF)

Buy & Rent

Used Haulotte Telehandlers for sale

LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.

Get in touch for more details:

Used Haulotte Telehandlers for sale | Forklift-International
Go to the offers

Compare Haulotte HTL4017 with similar Telehandlers

Haulotte HTL4017

Haulotte HTL4017

Nominal load at COG:
4 t
Model series:
HTL
Centre of gravity:
500 mm
Standard tyres:
400/80-24
Komatsu WH609

Komatsu WH609

Nominal load at COG:
3.5 t
Model series:
WH
Centre of gravity:
500 mm
Standard tyres:
405/70-24 PR14
Merlo TF 33.9 CS-120

Merlo TF 33.9 CS-120

Nominal load at COG:
3.3 t
Model series:
TF
Centre of gravity:
500 mm
Standard tyres:
405/70 R24 14 PR
Sennebogen 305 XL

Sennebogen 305 XL

Nominal load at COG:
4.5 t
Model series:
XL
Centre of gravity:
600 mm
Standard tyres:
405/70 R10
Caterpillar TH 82

Caterpillar TH 82

Nominal load at COG:
4 t
Model series:
TH
Centre of gravity:
500 mm
Standard tyres:
15.5-25

Do you want to see more detailed comparison?

Show me!

Sell Haulotte HTL4017

Telehandlers appraisal with LECTURA Valuation

Valuation

Whether you need to calculate value of your Haulotte HTL4017 or valuation of your Telehandlers fleet, LECTURA Valuation will help. Simply fill the form and see the pricing information for Telehandlers in few clicks.

Valuate right now!

Data provided by Lectura logo

Spare parts & Components

Get spare parts for Haulotte HTL4017 easily from our partners

Spare parts

Do your lookup for high quality parts for Haulotte HTL4017 online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Telehandlers spare parts easily today - worldwide.

Get parts for Haulotte HTL4017 now!

Transport

Telehandlers Transport & Shipping Services

In case you look for a transport your machine, take advantage of our services. Check the best fitting transport quotes for Telehandlers created on transport dimensions and machine's weight. Our partners provide various services to satisfy your requirements.

Ask for transport price

Data provided by Lectura logo

News