GTH4014 Genie Telehandler Specs & Dimensions (2013 - 2018)

Name: Genie GTH4014 Telehandlers
Brand: Genie

The Genie GTH4014 is a telehandler manufactured by Genie from 2013 to 2018. It has a weight of 10.225 tons and a transport length …

The Genie GTH4014 is a telehandler manufactured by Genie from 2013 to 2018. It has a weight of 10.225 tons and a transport length of 6.06 meters. The maximum horizontal reach is 9.08 meters, and it can lift loads up to 4 tons at the nominal load center of gravity. The lifting height is 13.57 meters, and it has a capacity of 1 ton at full forward reach. The center of gravity is located at 480 millimeters. The travel speed of this telehandler is 26 km/h. It can also lift loads up to 4 tons at the full lift height. The transport width is 2.32 meters, and the transport height is 2.4 meters.

GTH4014

Years of manufacture: 2013—2018

Data sheet
Buy & Rent
Valuate & Sell
Spare parts
Transport
News

Technical specs - GTH4014 Genie

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG: 4 t

Centre of gravity: 480 mm

Standard tyres: 405/70-20

Transmission type: HY

Max. Reach horizontal: 9.08 m

Capacity at full forward reach: 1 t

Lifting height: 13.57 m

Capacity at full lift height: 4 t

Weight: 10.225 t

Transport length: 6.06 m

Transport width: 2.32 m

Transport height: 2.4 m

Travel speed: 26 km/h

Engine manuf.: Perkins

Engine type: 854E-34TA

Engine power: 75 kW

Displacement: 3.4 l

Max. torque: 430/1400 Nm

Emission level: IV

More technical details, like: model series, max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, revolutions at max torque, no. of cylinders, cylinder bore x stroke, cab position, chassis type, levelling - chassis, stabilisers, drive - 2w / 4w, transmission type, attachment quickhitch, telematics available, engine manufacturer, engine model, emission rating, aspiration, rated speed, engine output - gross, tyre - front size, tyre - rear size, tyre 2 - front size option, tyre 2 - rear size option, service brake - type, service brake - location, length - at ground, length - front of carriage, height - over cab, width - operating, wheelbase, ground clearance, width - cab, width - stabiliser spread, boom angle - maximum, lift height - maximum, reach - maximum, reach - at maximum lift height, reach - ground with maximum capacity, unstabilised lift height - with maximum capacity, stabilised lift height - with maximum capacity, breakout force, lift capacity - maximum, lift capacity - to max height, lift capacity - to max reach, unstabilised lift capacity - maximum, unstabilised lift capacity - to max height, unstabilised lift capacity - to max reach, stabilised lift capacity - maximum, stabilised lift capacity - to max height, stabilised lift capacity - to max reach, fuel tank, number of boom sections, lift capacity - fork maximum, raise time - boom, extend time - boom, speed - forward maximum, speed - reverse maximum, operating weight are available in the full technical specs.

All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

Special equipment

Diesel particulate filter: No
StVZO Equipment: No
Inclination correction: No
Side displacement: No

Download datasheets (PDF)

Buy & Rent

Used Genie Telehandlers for sale

LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.

Get in touch for more details:

Go to the offers

Compare Genie GTH4014 with similar Telehandlers

Genie GTH4014

Nominal load at COG:: 4 t

Centre of gravity:: 480 mm

Standard tyres:: 405/70-20

Transmission type:: HY

Komatsu WH609

Nominal load at COG:: 3.5 t

Centre of gravity:: 500 mm

Standard tyres:: 405/70-24 PR14

Transmission type:: W

Merlo TF 33.9 CS-120

Nominal load at COG:: 3.3 t

Centre of gravity:: 500 mm

Standard tyres:: 405/70 R24 14 PR

Transmission type:: HY

Sennebogen 305 XL

Nominal load at COG:: 4.5 t

Centre of gravity:: 600 mm

Standard tyres:: 405/70 R10

Caterpillar TH 82

Nominal load at COG:: 4 t

Centre of gravity:: 500 mm

Standard tyres:: 15.5-25

Transmission type:: W

Do you want to see more detailed comparison?

Show me!

Sell Genie GTH4014

Telehandlers appraisal with LECTURA Valuation

Whether you need to see value of your Genie GTH4014 or valuation of your Telehandlers fleet, LECTURA Valuation will help. Simply fill the equipment details and see the values for Telehandlers in few clicks.

Valuate right now!

Data provided by

Spare parts & Components

Get spare parts for Genie GTH4014 easily from our partners

Do your lookup for high quality parts for Genie GTH4014 online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Telehandlers spare parts easily today - worldwide.

Get parts for Genie GTH4014 now!

Transport

Telehandlers Transport & Shipping Services

In case you need to transport your machine, apply our services. Search for the most appropriate transport quotes for Telehandlers built on transport dimensions and weight. Our partners provide comprehensive options to satisfy your demands.

Ask for transport price

Data provided by

News

Material Handling News by LECTURA 12.06.2026

Hyster launches XN2 electric forklift: High-performance evolution of a proven electric solution

Hyster announces the E2.2-3.5XN2, a 2,000 - 3,000kg capacity cushion tyre, electric lift truck series that builds upon the success of the established XN models to provide high performance, minimal downtime, and reduced total cost of operation in tough indoor applications.