Samson 40.11 TA Dieci Telehandler Specs & Dimensions (2004 - 2012)

The Dieci Samson 40.11 TA is a telehandler manufactured by Dieci from 2004 to 2012. It weighs 9.9 tons and has a transport length …

The Dieci Samson 40.11 TA is a telehandler manufactured by Dieci from 2004 to 2012. It weighs 9.9 tons and has a transport length of 5.09 meters. The telehandler has a nominal load capacity of 4 tons at the center of gravity and can lift loads up to a height of 11 meters. At full forward reach, it has a capacity of 1.1 tons. The center of gravity is located at 500 millimeters. The machine can also handle loads up to 3.5 tons at its full lift height. It has a transport width of 2.31 meters and a transport height of 2.5 meters.

Telehandlers Dieci Samson 40.11 TA

Technical specs - Samson 40.11 TA Dieci

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG
4 t
Model series
Samson
Centre of gravity
500 mm
Standard tyres
16/70x20
Transmission type
Hy
Max. Reach horizontal
7.6 m
Capacity at full forward reach
1.1 t
Lifting height
11 m
Capacity at full lift height
3.5 t
Weight
9.9 t
Transport length
5.09 m
Transport width
2.31 m
Transport height
2.5 m
Travel speed
30 km/h
max. climbing ability
40 %
Engine manuf.
Iveco
Engine type
F4GE0484C
Engine power
94 kW

More technical details, like: drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, displacement, revolutions at max torque, max. torque, no. of cylinders...

More technical details, like: drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, displacement, revolutions at max torque, max. torque, no. of cylinders, cylinder bore x stroke, emission level, cab position, chassis type, levelling - chassis, stabilisers, drive - 2w / 4w, transmission type, engine manufacturer, engine model, emission rating, aspiration, rated speed, engine output - gross, tyre - front size, tyre - rear size, tyre 2 - front size option, tyre 2 - rear size option, service brake - location, length - front of carriage, height - over cab, width - operating, wheelbase, ground clearance, width - cab, width - stabiliser spread, lift height - maximum, reach - maximum, reach - at maximum lift height, unstabilised lift height - with maximum capacity, stabilised lift height - with maximum capacity, turning radius - over tyres, breakout force, lift capacity - maximum, lift capacity - to max height, lift capacity - to max reach, unstabilised lift capacity - maximum, unstabilised lift capacity - to max height, unstabilised lift capacity - to max reach, stabilised lift capacity - maximum, stabilised lift capacity - to max height, stabilised lift capacity - to max reach, fuel tank, number of boom sections, load centre, lift capacity - fork maximum, speed - forward maximum, operating weight are available in the full technical specs.

All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

Special equipment

Diesel particulate filter
No
StVZO Equipment
No
Inclination correction
No
Side displacement
No

Download datasheets (PDF)

Buy & Rent

Used Dieci Telehandlers for sale

LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.

Get in touch for more details:

Used Dieci Telehandlers for sale | Forklift-International
Go to the offers

Compare Dieci Samson 40.11 TA with similar Telehandlers

Dieci Samson 40.11 TA

Dieci Samson 40.11 TA

Nominal load at COG:
4 t
Model series:
Samson
Centre of gravity:
500 mm
Standard tyres:
16/70x20
Komatsu WH609

Komatsu WH609

Nominal load at COG:
3.5 t
Model series:
WH
Centre of gravity:
500 mm
Standard tyres:
405/70-24 PR14
Merlo TF 33.9 CS-120

Merlo TF 33.9 CS-120

Nominal load at COG:
3.3 t
Model series:
TF
Centre of gravity:
500 mm
Standard tyres:
405/70 R24 14 PR
Sennebogen 305 XL

Sennebogen 305 XL

Nominal load at COG:
4.5 t
Model series:
XL
Centre of gravity:
600 mm
Standard tyres:
405/70 R10
Caterpillar TH 82

Caterpillar TH 82

Nominal load at COG:
4 t
Model series:
TH
Centre of gravity:
500 mm
Standard tyres:
15.5-25

Do you want to see more detailed comparison?

Show me!

Sell Dieci Samson 40.11 TA

Telehandlers appraisal with LECTURA Valuation

Valuation

Whether you need to know value of your Dieci Samson 40.11 TA or valuation of your Telehandlers fleet, LECTURA Valuation will help. Simply fill the machine information and see the values for Telehandlers in few clicks.

Valuate right now!

Data provided by Lectura logo

Spare parts & Components

Get spare parts for Dieci Samson 40.11 TA easily from our partners

Spare parts

Do your lookup for high quality parts for Dieci Samson 40.11 TA online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Telehandlers spare parts easily today - worldwide.

Get parts for Dieci Samson 40.11 TA now!

Transport

Telehandlers Transport & Shipping Services

In case you want to transport your machine, take advantage of our services. Query favourable transport quotes for Telehandlers built on machine's dimensions and weight. Our partners offer various services to fit your demands.

Ask for transport price

Data provided by Lectura logo

News