Scorpion 7040 Claas Telehandler Specs & Dimensions (2007 - 2014)

Name: Claas Scorpion 7040 Telehandlers
Brand: Claas

The Claas Scorpion 7040 telehandler, manufactured from 2007 to 2014, has a weight of 7.8 tons and a transport length of 4.76 meter…

The Claas Scorpion 7040 telehandler, manufactured from 2007 to 2014, has a weight of 7.8 tons and a transport length of 4.76 meters. It has a maximum horizontal reach of 3.75 meters and a lifting height of 7.1 meters. The nominal load at the center of gravity is 4 tons, and it has a capacity of 1.2 tons at full forward reach and 2.8 tons at full lift height. The telehandler has a center of gravity at 570 mm and a travel speed of 40 km/h. It has a transport width of 2.39 meters and a transport height of 2.49 meters. The special equipment included is inclination correction.

Scorpion 7040

Years of manufacture: 2007—2014

Data sheet
Buy & Rent
Valuate & Sell
Spare parts
Transport
News

Technical specs - Scorpion 7040 Claas

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG: 4 t

Model series: Scorpion

Centre of gravity: 570 mm

Standard tyres: 460/70 R24 AS Profil

Transmission type: HY

Max. Reach horizontal: 3.75 m

Capacity at full forward reach: 1.2 t

Lifting height: 7.1 m

Capacity at full lift height: 2.8 t

Weight: 7.8 t

Transport length: 4.76 m

Transport width: 2.39 m

Transport height: 2.49 m

Travel speed: 40 km/h

Engine manuf.: Deutz

Engine type: TCD2012 L4

Engine power: 88 kW

Emission level: Stufe III B

More technical details, like: max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, displacement, revolutions at max torque, max. torque, no. of cylinders, cylinder bore x stroke, cab position, chassis type, levelling - chassis, stabilisers, drive - 2w / 4w, transmission type, engine manufacturer, engine model, emission rating, aspiration, rated speed, engine output - gross, torque, tyre - front size, tyre - rear size, tyre 2 - front size option, tyre 2 - rear size option, service brake - type, service brake - location, length - front of carriage, height - over cab, width - operating, wheelbase, ground clearance, width - cab, boom angle - maximum, lift height - maximum, reach - maximum, reach - at maximum lift height, reach - ground with maximum capacity, unstabilised lift height - with maximum capacity, turning radius - over tyres, lift capacity - maximum, lift capacity - to max height, lift capacity - to max reach, unstabilised lift capacity - maximum, unstabilised lift capacity - to max height, unstabilised lift capacity - to max reach, fuel tank, number of boom sections, load centre, lift capacity - fork maximum, raise time - boom, extend time - boom, speed - forward maximum, operating weight are available in the full technical specs.

All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

Special equipment

Diesel particulate filter: No
StVZO Equipment: No
Inclination correction: Yes
Side displacement: No

Download datasheets (PDF)

Buy & Rent

Used Claas Telehandlers for sale

LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.

Get in touch for more details:

Go to the offers

Compare Claas Scorpion 7040 with similar Telehandlers

Claas Scorpion 7040

Nominal load at COG:: 4 t

Model series:: Scorpion

Centre of gravity:: 570 mm

Standard tyres:: 460/70 R24 AS Profil

Komatsu WH609

Nominal load at COG:: 3.5 t

Model series:: WH

Centre of gravity:: 500 mm

Standard tyres:: 405/70-24 PR14

Merlo TF 33.9 CS-120

Nominal load at COG:: 3.3 t

Model series:: TF

Centre of gravity:: 500 mm

Standard tyres:: 405/70 R24 14 PR

Sennebogen 305 XL

Nominal load at COG:: 4.5 t

Model series:: XL

Centre of gravity:: 600 mm

Standard tyres:: 405/70 R10

Caterpillar TH 82

Nominal load at COG:: 4 t

Model series:: TH

Centre of gravity:: 500 mm

Standard tyres:: 15.5-25

Do you want to see more detailed comparison?

Show me!

Sell Claas Scorpion 7040

Telehandlers appraisal with LECTURA Valuation

Whether you need to see value of your Claas Scorpion 7040 or valuation of your Telehandlers fleet, LECTURA Valuation will help. Simply fill the machine details and see the values for Telehandlers in few clicks.

Valuate right now!

Data provided by

Spare parts & Components

Get spare parts for Claas Scorpion 7040 easily from our partners

Do your lookup for high quality parts for Claas Scorpion 7040 online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Telehandlers spare parts easily today - worldwide.

Get parts for Claas Scorpion 7040 now!

Transport

Telehandlers Transport & Shipping Services

In case you need to transport your machine, apply our services. Check the ideal transport quotes for Telehandlers built on transport dimensions and weights. Our partners provide large-scale services to meet your demands.

Ask for transport price

Data provided by

News

Material Handling News by LECTURA 17.06.2026