TH407C Caterpillar Telehandler Specs & Dimensions (2012 - 2017)

The Caterpillar TH407C Telehandler, manufactured from 2012 to 2017, weighs 8.73 tons and has a transport length of 5.347 meters. I…

The Caterpillar TH407C Telehandler, manufactured from 2012 to 2017, weighs 8.73 tons and has a transport length of 5.347 meters. It has a maximum horizontal reach of 3.763 meters and a nominal load at the center of gravity of 3.7 tons. The lifting height of this telehandler is 7.3 meters. It has a capacity of 1.5 tons at full forward reach and 2 tons at full lift height. The travel speed of this machine is 40 km/h. It has a transport width of 2.382 meters and a transport height of 2.374 meters.

Telehandlers Caterpillar TH407C

Technical specs - TH407C Caterpillar

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG
3.7 t
Model series
TH
Standard tyres
15.5/80-24 16PR
Max. Reach horizontal
3.763 m
Capacity at full forward reach
1.5 t
Lifting height
7.3 m
Capacity at full lift height
2 t
Weight
8.73 t
Transport length
5.347 m
Transport width
2.382 m
Transport height
2.374 m
Travel speed
40 km/h
Engine manuf.
Caterpillar
Engine type
C3.4B
Engine power
75 kW
Displacement
3.4 l
Max. torque
420/1400 Nm
Cylinder bore x stroke
99x110 mm
Emission level
III b

More technical details, like: centre of gravity, transmission type, max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, revolutions at max torque...

More technical details, like: centre of gravity, transmission type, max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, revolutions at max torque, no. of cylinders, cab position, chassis type, levelling - chassis, stabilisers, drive - 2w / 4w, transmission type, attachment quickhitch, telematics available, engine manufacturer, engine model, emission rating, aspiration, engine output - gross, torque, tyre - front size, tyre - rear size, tyre 2 - front size option, tyre 2 - rear size option, service brake - type, service brake - location, length - front of carriage, height - over cab, width - operating, wheelbase, ground clearance, width - cab, boom angle - maximum, lift height - maximum, reach - maximum, reach - at maximum lift height, reach - ground with maximum capacity, unstabilised lift height - with maximum capacity, turning radius - over tyres, breakout force, lift capacity - maximum, lift capacity - to max height, lift capacity - to max reach, unstabilised lift capacity - maximum, unstabilised lift capacity - to max height, unstabilised lift capacity - to max reach, fuel tank, number of boom sections, load centre, lift capacity - fork maximum, raise time - boom, extend time - boom, speed - forward maximum, operating weight are available in the full technical specs.

All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

Special equipment

Diesel particulate filter
No
StVZO Equipment
No
Inclination correction
No
Side displacement
No

Download specalog and datasheets (PDF)

Buy & Rent

Used Caterpillar Telehandlers for sale

LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.

Get in touch for more details:

Used Caterpillar Telehandlers for sale | Forklift-International
Go to the offers

Compare Caterpillar TH407C with similar Telehandlers

Caterpillar TH407C

Caterpillar TH407C

Nominal load at COG:
3.7 t
Model series:
TH
Standard tyres:
15.5/80-24 16PR
Max. Reach horizontal:
3.763 m
Komatsu WH609

Komatsu WH609

Nominal load at COG:
3.5 t
Model series:
WH
Standard tyres:
405/70-24 PR14
Max. Reach horizontal:
5.2 m
Merlo TF 33.9 CS-120

Merlo TF 33.9 CS-120

Nominal load at COG:
3.3 t
Model series:
TF
Standard tyres:
405/70 R24 14 PR
Max. Reach horizontal:
6.7 m
Caterpillar TH 82

Caterpillar TH 82

Nominal load at COG:
4 t
Model series:
TH
Standard tyres:
15.5-25
Max. Reach horizontal:
4.06 m
Haulotte HTL4014

Haulotte HTL4014

Nominal load at COG:
4 t
Model series:
HTL
Standard tyres:
400/80-24
Max. Reach horizontal:
9.8 m

Do you want to see more detailed comparison?

Show me!

Sell Caterpillar TH407C

Telehandlers appraisal with LECTURA Valuation

Valuation

Whether you need to get value of your Caterpillar TH407C or valuation of your Telehandlers fleet, LECTURA Valuation will help. Simply fill the machine details and see the pricing information for Telehandlers in few clicks.

Valuate right now!

Data provided by Lectura logo

Spare parts & Components

Get spare parts for Caterpillar TH407C easily from our partners

Spare parts

Do your lookup for high quality parts for Caterpillar TH407C online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Telehandlers spare parts easily today - worldwide.

Get parts for Caterpillar TH407C now!

Transport

Telehandlers Transport & Shipping Services

In case you look into transport options for your machine, apply our services. Examine the ideal transport quotes for Telehandlers created on transport dimensions and weights. Our partners provide large-scale options to meet your requirements.

Ask for transport price

Data provided by Lectura logo

News