Manufacturer

    All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts LPG Forklifts LPG Forklifts Still Still RCG 15 specifications

    Still RCG 15 Specifications & Technical Data (2021-2021)

    Rate this machine now!

    Nominal load at COG: 1.5t – Standard tyres: SE 2x/2 – Centre of gravity: 500mm – Transmission type: EW – Weight: 3.1t – Total width: 1140mm

    Technical specs - RCG 15 Still

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    Nominal load at COG 1.5 t
    Standard tyres SE 2x/2
    Centre of gravity 500 mm
    Transmission type EW
    Weight 3.1 t
    Total width 1140 mm
    Construction height 2080 mm
    Turning radius 2.16 m
    Lifting height 3 m
    Travel speed with / without load 17 km/h
    Hoisting with / without load 0,65/0,76 m/s
    Lowering with load 0,48/0,43 m/s
    max. climbing ability 20/20 %
    Engine manuf. Deutz
    Engine type G2,2
    Engine power 40 kW
    Displacement 2.2 l
    No. of cylinders 3
    Engine power ###
    Dimension lxwxh ###
    Revolutions at max torque ###
    Max. torque ###
    Cylinder bore x stroke ###
    Weight ###
    Emission level ###

    L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulics with Simplex mast (3,3m up to 10t • 5m > 10t load capacity)

    RAVAS iForks-32 weight scaling solution for your Still RCG 15

    RAVAS iForks-32

    Successful RAVAS scale forks

    Fit iForks for your Still RCG 15 and realise immediate cost savings

    Functions:

    Gross/net weighing

    Totalling with sequence number

    Weight data transfer to smart phone, tablet, handheld and WMS/ERP system

    Benefits:

    Installation within 5 minutes

    Completely wireless with digital calibration

    More information
    X

    What do you think about this machine?

    Compare Still RCG 15 with other models

    No image available

    Still RCG 15

    1.5t

    SE 2x/2

    500 mm

    Still products

    Check out 15 Still products here

    More about Still