Manufacturer

    All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts LPG Forklifts LPG Forklifts Crown Crown C5 1050-40 specifications

    Technical specs - C5 1050-40 Crown

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    Nominal load at COG 1.814 t
    Standard tyres Front: 7.00 - 12 / Rear: 6.00 - 9
    Centre of gravity 610 mm
    Weight 3.908 t
    Total width 1194 mm
    Construction height 2184 mm
    Turning radius 2.222 m
    Lifting height 7.47 m
    Travel speed with / without load 19.6 / 19.6 km/h
    Hoisting with / without load 0.65 / 0.66 m/s
    Lowering with load 0.47 m/s
    max. climbing ability 28.5 %
    Engine manuf. N/A
    Engine type N/A
    Engine power 44 kW
    Engine power 59 HP
    Displacement 2.4 l
    Revolutions at max torque 1400 rpm
    Max. torque 169 Nm
    No. of cylinders 4
    Transmission type ###
    Dimension lxwxh ###
    Cylinder bore x stroke ###
    Weight ###
    Emission level ###

    L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulics with Simplex mast (3,3m up to 10t • 5m > 10t load capacity)

    RAVAS iForks-32 weight scaling solution for your Crown C5 1050-40

    RAVAS iForks-32

    Successful RAVAS scale forks

    Fit iForks for your Crown C5 1050-40 and realise immediate cost savings

    Functions:

    Gross/net weighing

    Totalling with sequence number

    Weight data transfer to smart phone, tablet, handheld and WMS/ERP system

    Benefits:

    Installation within 5 minutes

    Completely wireless with digital calibration

    More information

    Download data sheets - Crown C5 1050-40

    X

    What do you think about this machine?

    Compare Crown C5 1050-40 with other models

    Press 1 image

    Crown C5 1050-40

    1.814t

    Front: 7.00 - 12 / Rear: 6.00 - 9

    610 mm

    Crown products

    Check out 14 Crown products here

    More about Crown

    Material Handling News by LECTURA 05.08.2020

    Probst jumps across the Atlantic: Acquisition of the business of the American distributor Pave Tech by the subsidiary Probst Inc.
    Probst jumps across the Atlantic: Acquisition of the business of the American distributor Pave Tech by the subsidiary Probst Inc.

    By taking over the business of the American distributor Pave Tech, Probst expands its global sales network with another ten experienced employees.

    More industry news