All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts LPG Forklifts LPG Forklifts Crown Crown C-5 1050-2.0 specifications

    Technical specs - C-5 1050-2.0 Crown

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    Nominal load at COG 2 t
    Standard tyres Front: 26x7.00-12 / Rear: 6.00-9
    Centre of gravity 500 mm
    Weight 3.905 t
    Total width 1195 mm
    Construction height 2185 mm
    Turning radius 2.355 m
    Lifting height 3.81 m
    Travel speed with / without load 20/20 km/h
    Hoisting with / without load 0.58/0.64 m/s
    Lowering with load 0.46/0.47 m/s
    max. climbing ability 40 %
    Engine manuf. Crown
    Engine type 4024
    Engine power 43 kW
    Engine power 58 HP
    Revolutions at max torque 1680 rpm
    Max. torque 171 Nm
    No. of cylinders 4
    Transmission type ###
    Dimension lxwxh ###
    Displacement ###
    Cylinder bore x stroke ###
    Weight ###
    Emission level ###

    L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulics with Simplex mast (3,3m up to 10t • 5m > 10t load capacity)

    RAVAS iForks-32 weight scaling solution for your Crown C-5 1050-2.0

    RAVAS iForks-32

    Successful RAVAS scale forks

    Fit iForks for your Crown C-5 1050-2.0 and realise immediate cost savings


    Gross/net weighing

    Totalling with sequence number

    Weight data transfer to smart phone, tablet, handheld and WMS/ERP system


    Installation within 5 minutes

    Completely wireless with digital calibration

    More information

    What do you think about this machine?

    Compare Crown C-5 1050-2.0 with other models

    Press 1 image

    Crown C-5 1050-2.0


    Front: 26x7.00-12 / Rear: 6.00-9

    500 mm

    Crown products

    Check out 14 Crown products here

    More about Crown

    Material Handling News by LECTURA 29.11.2020

    Weekly overview 23.11.-27.11. 2020
    Weekly overview 23.11.-27.11. 2020

    Weekly overview of interesting news from heavy machinery industry.

    More industry news