GC60K Caterpillar LPG Forklift Specs & Dimensions (2019 - 2026)

Nominal load at COG: 6t – Centre of gravity: 600mm – Standard tyres: Front: 28x12x22 / Rear: 22x8x16 – Weight: 8.76t – Total width…

Nominal load at COG: 6t – Centre of gravity: 600mm – Standard tyres: Front: 28x12x22 / Rear: 22x8x16 – Weight: 8.76t – Total width: 1440mm – Construction height: 2150mm

Caterpillar is the manufacturer of the GC60K LPG forklift. The production years for this model are (2019 - 2026). Find here detailed specs for GC60K LPG powered lift truck - in a form of table chart below and downloadable datasheet. Explore also the other forklift models produced by Caterpillar.

LPG Forklifts Caterpillar GC60K

Technical specs - GC60K Caterpillar

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG
6 t
Centre of gravity
600 mm
Standard tyres
Front: 28x12x22 / Rear: 22x8x16
Weight
8.76 t
Total width
1440 mm
Construction height
2150 mm
Turning radius
2.57 m
Lifting height
2.37 m
Travel speed with / without load
21.0/23.0 km/h
Hoisting with / without load
0.36/0.39 m/s
Lowering with load
0.54 m/s
max. climbing ability
30 %
Model series
GC
Engine manuf.
N/A
Engine type
PSI 4X
Engine power
78 kW
Revolutions at max torque
1000 rpm
Max. torque
285 Nm
No. of cylinders
6

More technical details, like: transmission type, dimension lxwxh, displacement, cylinder bore x stroke, emission level are available in the full technical specs.

L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulics with Simplex mast (3,3m up to 10t • 5m > 10t load capacity)

Download specalog and datasheets (PDF)

Caterpillar GC60K overview

Handling

Lower Cost of Ownership

Informative display panel reduces costly, unscheduled downtime. Easy to access engine allows for quick, easy inspection and maintenance. Rugged mast offers good visibility, while tapered fork bars allow good visibility through the carriage. Hydraulic cushioning on Triplex masts reduces the risk of load damage.


Performance

Unmatched Productivity

Powered by a proven engine giving smooth, quiet performance and high torque at low speeds - essential for handling heavy loads. Electronically-controlled VORTEC induction system optimizes fuel and air mixture to give efficient low-end power. Short wheelbase and a small turning radius give good maneuverability. STR models feature extra-heavy counterweights, which permit a short turning radius, providing greater maneuverability and rearward visibility. Additionally, a vacuum-boosted brake system ensures easy operation. The 3.5 - 5.5 tonne models feature a single speed power shift transmission, while the 6.0 - 7.0 tonne models are equipped with a two-speed automatic transmission.


Safety

Options

Speed limit options Foot directional control Double element cyclone air cleaner Non marking tires Dust proof kit for hydraulic tank and pump Rear view mirror


Cabin & Equipment

Safety & Ergonomics

An open-step frame and easy-to-reach grab bar allow easy entry and exit. Noise reduction and vibration damping reduce operator fatigue. An adjustable, full suspension seat enhances operator comfort by resisting shock and vibration from rough and uneven surfaces. Additionally, the adjustable tilt steering column improves operator comfort. The hydraulic controls allow precise, short-throw operation, while the seat-activated transmission interlock system disengages the drive function if the operator leaves the seat.


Buy & Rent

Used Caterpillar LPG Forklifts for sale

We analyze attractive deals from many sources about LPG Forklifts.
Find current offers on often visited classified websites presenting second hand LPG Forklifts to buy in many countries.

Get in touch for more details:

Compare Caterpillar GC60K with similar LPG Forklifts

Caterpillar GC60K

Caterpillar GC60K

Nominal load at COG:
6 t
Centre of gravity:
600 mm
Standard tyres:
Front: 28x12x22 / Rear: 22x8x16
Weight:
8.76 t
Kalmar GCD 70-6 H

Kalmar GCD 70-6 H

Nominal load at COG:
7 t
Centre of gravity:
600 mm
Standard tyres:
L 2/2xL
Weight:
9.6 t
DanTruck 9860 G

DanTruck 9860 G

Nominal load at COG:
6 t
Centre of gravity:
600 mm
Standard tyres:
SE2/SE2
Weight:
9.8 t
Steinbock H 50 L

Steinbock H 50 L

Nominal load at COG:
5 t
Centre of gravity:
600 mm
Standard tyres:
L 6

Sell Caterpillar GC60K

LPG Forklifts appraisal with LECTURA Valuation

Valuation

Whether you need to get value of your Caterpillar GC60K or valuation of your LPG Forklifts fleet, LECTURA Valuation will help. Simply fill the machine details and see the pricing information for LPG Forklifts in few clicks.

Valuate right now!

Data provided by Lectura logo

Spare parts & Components

Get spare parts for Caterpillar GC60K easily from our partners

Spare parts

Do your lookup for high quality parts for Caterpillar GC60K online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the LPG Forklifts spare parts easily today - worldwide.

Get parts for Caterpillar GC60K now!

Transport

LPG Forklifts Transport & Shipping Services

In case you want a transport for your machine, apply our services. Examine the ideal transport quotes for LPG Forklifts created on transport dimensions and weights. Our partners provide large-scale options to meet your requirements.

Ask for transport price

Data provided by Lectura logo

News

Material Handling News by LECTURA 06.07.2026

More industry news