DCG60-6 Kalmar diesel forklift specs & dimensions (2016 - 2021)

The Kalmar DCG60-6 is a diesel forklift manufactured by Kalmar from 2016 to 2021. It has a weight of 8.9 tons and a nominal load a…

The Kalmar DCG60-6 is a diesel forklift manufactured by Kalmar from 2016 to 2021. It has a weight of 8.9 tons and a nominal load at the center of gravity of 6 tons. The forklift can lift loads up to a height of 3.5 meters and has a center of gravity at 600 mm. It has a maximum climbing ability of 85 percent and a total width of 2000 mm. The turning radius of the forklift is 3.3 meters and its construction height is 2570 mm.

Diesel Forklifts Kalmar DCG60-6

Technical specs - DCG60-6 Kalmar

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG
6 t
Centre of gravity
600 mm
Standard tyres
4x2
Transmission type
W
Weight
8.9 t
Total width
2000 mm
Construction height
2570 mm
Turning radius
3.3 m
Lifting height
3.5 m
Travel speed with / without load
22/23 km/h
Hoisting with / without load
0.33/0.37 m/s
Lowering with load
0.49/0.42 m/s
max. climbing ability
85 %
Model series
DCG
Engine manuf.
AGCO Power
Engine type
44 AWF
Engine power
77 kW
Revolutions at max torque
2200 rpm
Max. torque
425/1500 Nm
No. of cylinders
4
Emission level
IV

More technical details, like: dimension lxwxh, displacement, cylinder bore x stroke are available in the full technical specs.

L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulics with Simplex mast (3,3m up to 10t • 5m > 10t load capacity)

Download datasheets (PDF)

Kalmar DCG60-6 overview

Kalmar DCG60-6 features overview

Tailored operator environment

Customizing your forklift is not just about ordering factory-delivered features. It’s also about being able to adapt the driver’s operational environment using, for example, adjustable seats, levers and settings. Need we say that no other forklift brand is as adaptable to different driver requirements?


Keeping operators in good shape

Most companies agree that safety and ergonomics are important. But is it really worth the expense to go for the very best operator environment? We say: can you afford not to care for your operators’ well-being?


Operator well-being

Even the most advanced forklift is only half a forklift without a healthy and motivated driver. Invest in your operators’ wellbeing and you can expect them to perform better, stay healthy and remain loyal to your company. Who wouldn’t want that?


Performance

Three different performance settings

The driver can optimize the forklift’s operational performance depending on the actual need for e.g. low fuel consumption or high power output. All from the comfort of the popular EGO cabin – and by simply toggling a switch during operation.


Cabin & Equipment

Clear view

Stepping into the cabin, you will immediately notice the exceptionally good view ergonomically, both forward and backward. The large front-view window, along with the side-posts, provides a perfect, unobstructed view of the work area. No more constantly changing positions to get a clear view from the cabin.


Buy & Rent

Used Kalmar Diesel Forklifts for sale

LECTURA gathers most relevant deals from many sources about Diesel Forklifts.
Find current offers on often visited classified marketplaces presenting second hand Diesel Forklifts to buy in many countries.

Get in touch for more details:

Used Kalmar Diesel Forklifts for sale | Forklift-International
Go to the offers

Compare Kalmar DCG60-6 with similar Diesel Forklifts

Kalmar DCG60-6

Kalmar DCG60-6

Nominal load at COG:
6 t
Centre of gravity:
600 mm
Standard tyres:
4x2
Transmission type:
W
OM DI 50 C 500

OM DI 50 C 500

Nominal load at COG:
5 t
Centre of gravity:
600 mm
Standard tyres:
L 4
Transmission type:
W
Nissan DF 05 A 50 U

Nissan DF 05 A 50 U

Nominal load at COG:
5 t
Centre of gravity:
600 mm
Standard tyres:
L 4
Transmission type:
W
Heli CPCD 60 W

Heli CPCD 60 W

Nominal load at COG:
6 t
Centre of gravity:
600 mm
Standard tyres:
SE 4x/2
Lugli 70 C

Lugli 70 C

Nominal load at COG:
7 t
Centre of gravity:
600 mm
Standard tyres:
L 6
Transmission type:
HY

Sell Kalmar DCG60-6

Diesel Forklifts appraisal with LECTURA Valuation

Valuation

Whether you need to calculate value of your Kalmar DCG60-6 or valuation of your Diesel Forklifts fleet, LECTURA Valuation will help. Simply fill the equipment details and see the values for Diesel Forklifts in few clicks.

Valuate right now!

Data provided by Lectura logo

Spare parts & Components

Get spare parts for Kalmar DCG60-6 easily from our partners

Spare parts

Do your lookup for high quality parts for Kalmar DCG60-6 online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Diesel Forklifts spare parts easily today - worldwide.

Get parts for Kalmar DCG60-6 now!

Transport

Diesel Forklifts Transport & Shipping Services

In case you look for a transport your machine, apply our services. Seek for the most appropriate transport quotes for Diesel Forklifts built on transport dimensions and weight. Our partners provide comprehensive services to satisfy your demands.

Ask for transport price

Data provided by Lectura logo

News