Lectura specs Forklifts Diesel Forklifts Diesel Forklifts Kalmar Kalmar DCG 180-6 specifications

Kalmar DCG 180-6 diesel forklift specs (2012 - 2018)

Rate this machine now!

The Kalmar DCG 180-6 is a diesel forklift manufactured by Kalmar from 2012 to 2018. It has a weight of 21.6 tons and a nominal loa... Read more

The Kalmar DCG 180-6 is a diesel forklift manufactured by Kalmar from 2012 to 2018. It has a weight of 21.6 tons and a nominal load at the center of gravity of 18 tons. The forklift can lift loads up to a height of 5 meters and has a center of gravity at 600 mm. It has a maximum climbing ability of 79 percent and a lowering speed of 0.4 meters per second with a load. The total width of the forklift is 2540 mm and it has a turning radius of 4.57 meters. The construction height of the forklift is 2920 mm.

Technical specs - DCG 180-6 Kalmar

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur.Contact our team with any change suggestion.

  • Nominal load at COG 18 t
  • Centre of gravity 600 mm
  • Standard tyres 4x/2
  • Transmission type W
  • Weight 21.6 t
  • Total width 2540 mm
  • Construction height 2920 mm
  • Turning radius 4.57 m
  • Lifting height 5 m
  • Travel speed with / without load 27/29 km/h
  • Hoisting with / without load 0.35/0.4 m/s
  • Lowering with load 0.4 m/s
  • max. climbing ability 79 %
  • Model series DCG
  • Engine manuf. Volvo
  • Engine type TAD761VE
  • Engine power 160 kW

More technical details, like: dimension lxwxh, displacement, revolutions at max torque, max. torque, no. of cylinders, cylinder bore x stroke, emission level are available in the full technical specs.

L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulics with Simplex mast (3,3m up to 10t • 5m > 10t load capacity)

Carbon footprint calculator for Diesel Forklifts

Check out the ERA equipment CO2 Calculator to estimate the CO2 footprint per hour of use of the Kalmar DCG 180-6 or alternative Diesel Forklifts.

The carbon footprint calculation can be carried out based on various energy consumption scenarios or other variables.

or go to the ERA Equipment CO2 Calculator to find out how to optimise your carbon footprint.

service provided by ERA

Buy & Rent

Used Kalmar Diesel Forklifts for sale

LECTURA gathers most relevant deals from many sources about Diesel Forklifts.
Find current offers on often visited classified marketplaces presenting second hand Diesel Forklifts to buy in many countries.

Get in touch for more details:

Spare parts & Components

Get spare parts for Kalmar DCG 180-6 easily from our partners

Inquire the spare part you need from our partners with a few easy steps and choose the best offer. Wether you are a dealer or an owner, LECTURA can advise you to the right direction. Order the Diesel Forklifts spare parts easily today - worldwide.

Transport

Diesel Forklifts Transport & Shipping Services

In case you want to transport your machine, take advantage of our services. Ask for the ideal transport quotes for Diesel Forklifts created on dimensions and weight. Our partners offer major options to meet your requirements.

Ask for transport price
Data provided by

Events & News

X

What do you think about this machine?

Kalmar products

Check out 6 Kalmar products here

More about Kalmar