420 Case 420 Specifications & Technical Data (2005—2008)

The Case 420 is a skid steer loader manufactured by Case from 2005 to 2008. It has a weight of 2.64 tons and a transport length of…

The Case 420 is a skid steer loader manufactured by Case from 2005 to 2008. It has a weight of 2.64 tons and a transport length of 3.28 meters. The bucket capacity is 0.43 cubic meters, with a maximum discharge height of 0.582 meters. It has a travel speed of 11 km/h, with a transport width of 1.5 meters and a transport height of 1.92 meters. The lifting force is 24.5 kilonewtons, and the rated operating capacity is 794 kilograms.

Skid Steer Loaders Case 420

Technical specs - 420 Case

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Weight
2.64 t
Rated operating capacity
794 kg
Bucket capacity
0.43 m³
Driver protection
Ü
Steering mode
AL
Transport length
3.28 m
Transport width
1.5 m
Transport height
1.92 m
Travel speed
11 km/h
Max. discharge height
0.582 m
Lifting force
24.5 kN
Engine manuf.
Case
Engine type
422T-M2
Engine power
42 kW

More technical details, like: track width, standard tyres, bucket width, model series, dimension lxwxh, displacement, revolutions at max torque, max. torque, no. of cylinders, cylinder bore x stroke, emission level, lift geometry...

More technical details, like: track width, standard tyres, bucket width, model series, dimension lxwxh, displacement, revolutions at max torque, max. torque, no. of cylinders, cylinder bore x stroke, emission level, lift geometry, access, engine manufacturer, engine model, aspiration, rated speed, engine output - net, engine output - gross, transmission type, tyre size, length - no bucket, length - with bucket, width - no bucket, width - with bucket, height - top of cab, ground clearance, wheelbase, rear departure angle, height to hinge pin, dump angle, dump height - maximum, reach - max dump height, turning radius - rear corner, turning radius - bucket corner, fuel tank, heaped capacity, tipping load, operating capacity, speed - maximum, breakout - bucket, lift capacity, pump type, pump flow, system pressure, operating weight are available in the full technical specs.

Basic model with ROPS cabin and std. shovel with teeth

Special equipment

Diesel particulate filter
No
LPG motor
No
Burglar proof system
No

Download datasheets (PDF)

Case 420 FAQ

When was the Case 420 skid steer loader manufactured?

The Case 420 skid steer loader was manufactured from 2005 to 2008.

How much does the Case 420 skid steer loader weigh?

The Case 420 skid steer loader weighs 2.64 tons.

What are the transport dimensions of the Case 420 skid steer loader?

The Case 420 skid steer loader has a transport length of 3.28 meters, a transport width of 1.5 meters, and a transport height of 1.92 meters.

What is the travel speed of the Case 420 skid steer loader?

The Case 420 skid steer loader has a travel speed of 11 km/h.

What is the steering mode of the Case 420 skid steer loader?

The Case 420 skid steer loader has an all-wheel steering mode.

What is the power rating of the Case 420 skid steer loader?

The source data does not provide a power rating for the Case 420 skid steer loader.

What is the material handling capacity of the Case 420 skid steer loader?

The Case 420 skid steer loader has a rated operating capacity of 794 kg and a maximum discharge height of 0.58 meters.

What is the bucket capacity of the Case 420 skid steer loader?

The Case 420 skid steer loader has a bucket capacity of 0.43 cubic meters.

What operator safety and support features does the Case 420 skid steer loader have?

The Case 420 skid steer loader is equipped with a roll-over bar for driver protection.

How much is a Case 420 Skid steer loader (2005u20132008) worth?

The residual value of the Case 420 depends on the machine's individual parameters. Visit the LECTURA Valuation to check it.

Machine inspection

Ask for inspection of your Case 420 from experts

Machine inspection

Mevas is an international operating inspection service for used heavy machinery. Construction machinery inspectors are available in more than 20 countries.

Use this service to minimise the risk when buying used equipment. An inspection by Mevas costs less than repairing a defective hydraulic cylinder.

Enquire machine inspection

Provided by: Mevas — The Heavy Equipment Inspectors

Buy & Rent

Compare Case 420 with similar Skid Steer Loaders

Case 420

Case 420

Weight:
2.64 t
Rated operating capacity:
794 kg
Bucket capacity:
0.43 m³
Driver protection:
Ü
New Holland LS 170

New Holland LS 170

Weight:
2.51 t
Rated operating capacity:
800 kg
Bucket capacity:
0.48 m³
Driver protection:
KbR
Volvo MC70C

Volvo MC70C

Weight:
2.84 t
Rated operating capacity:
703 kg
Bucket capacity:
0.39 m³
Driver protection:
KbR
JCB Robot 150

JCB Robot 150

Weight:
2.35 t
Rated operating capacity:
630 kg
Bucket capacity:
0.29 m³
XCMG XC740K

XCMG XC740K

Weight:
3.14 t
Rated operating capacity:
750 kg
Bucket capacity:
0.45 m³
Driver protection:
KbR

Do you want to see more detailed comparison?

Show me!

Sell Case 420

Skid Steer Loaders appraisal with LECTURA Valuation

Valuation

Whether you need to calculate value of your Case 420 or valuation of your Skid Steer Loaders fleet, LECTURA Valuation will help. Simply fill the equipment details and see the values for Skid Steer Loaders in few clicks.

Valuate right now!

Data provided by Lectura logo

Spare parts & Components

Get spare parts for Case 420 easily from our partners

Spare parts

Do your lookup for high quality parts for Case 420 online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Skid Steer Loaders spare parts easily today - worldwide.

Get parts for Case 420 now!

Transport

Skid Steer Loaders Transport & Shipping Services

In case you look for a transport your machine, apply our services. Query the most appropriate transport quotes for Skid Steer Loaders built on transport dimensions and weights. Our partners provide large-scale services to satisfy your demands.

Ask for transport price

Data provided by Lectura logo

News

Construction News by LECTURA 15.06.2026

Entegra Attachments, LLC announces purchase of TEI Rock Drills

Entegra Attachments, LLC announces purchase of TEI Rock Drills

Entegra Attachments, LLC, of Saint Charles, IL, is pleased to announce its acquisition of TEI Rock Drills, Inc., a Montrose, CO based manufacturer of specialized drilling machinery used in underground utilities, mining, tunneling, and construction applications.

More industry news