TC 16 Twindrive Terex excavator specs & dimensions (2006 - 2016)

Terex TC 16 Twindrive is a mini excavator manufactured from 2006 to 2016. It has a weight of 1.65 tons and a track width of 230 mm…

Terex TC 16 Twindrive is a mini excavator manufactured from 2006 to 2016. It has a weight of 1.65 tons and a track width of 230 mm. The transport dimensions are 3.8 meters in length, 0.99 meters in width, and 2.29 meters in height. The machine features a tear-out force of 9.3 kN, a dredging depth of 2.2 meters, and a maximum horizontal reach of 3.9 meters. The bucket width is 0.4 meters, with a capacity ranging from 0.021 to 0.091 cubic meters. Special equipment includes a blade, mechanical quick hitch, rubber track, and track adjustment.

TC 16 Twindrive

Years of manufacture: 2006—2016

Data sheet
Buy & Rent
Valuate & Sell
Spare parts
Transport
News

Technical specs - TC 16 Twindrive Terex

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Weight: 1.65 t

Transport length: 3.8 m

Transport width: 0.99 m

Transport height: 2.29 m

Bucket capacity min.: 0.021 m³

Bucket capacity max.: 0.091 m³

Bucket width: 0.4 m

Track width: 230 mm

Driver protection: FD

Max. Reach horizontal: 3.9 m

Dredging depth: 2.2 m

Tear-out force: 9.3 kN

Model series: TC

Engine manuf.: Mitsubishi

Engine type: L 3 E

Engine power: 13.1 kW

Displacement: 0.952 l

Revolutions at max torque: 2000 rpm

More technical details, like: bucket capacity, standard tyres, dimension lxwxh, max. torque, no. of cylinders, cylinder bore x stroke, emission level are available in the full technical specs.

Basic model with standard bucket

Special equipment

Track adjustment: Yes
Rubber track: Yes
Blade: Yes
Aircondition: No
Quick hitch hydr.: No
Quick hitch mech.: Yes

Download datasheets (PDF)

Terex TC 16 Twindrive FAQ

When was the Terex TC 16 Twindrive manufactured?

The Terex TC 16 Twindrive was manufactured from 2006 to 2016.

How much does the Terex TC 16 Twindrive weigh?

The Terex TC 16 Twindrive weighs 1.65 tons.

What are the transport dimensions of the Terex TC 16 Twindrive mini excavator?

The Terex TC 16 Twindrive has a transport length of 3.8 meters, a transport width of 0.99 meters, and a transport height of 2.29 meters.

What is the track width of the Terex TC 16 Twindrive's undercarriage?

The Terex TC 16 Twindrive has a track width of 230 mm.

What are the excavation performance specifications of the Terex TC 16 Twindrive mini excavator?

The Terex TC 16 Twindrive mini excavator has a dredging depth of 2.2 meters and a maximum horizontal reach of 3.9 meters.

What is the tear-out force of the Terex TC 16 Twindrive?

The Terex TC 16 Twindrive has a tear-out force of 9.3 kN.

What are the specifications of the primary work tool on the Terex TC 16 Twindrive mini excavator?

The primary work tool of the Terex TC 16 Twindrive mini excavator has a bucket capacity ranging from 0.02 to 0.09 cubic meters and a bucket width of 0.4 meters.

What operator safety and support features does the Terex TC 16 Twindrive have?

The Terex TC 16 Twindrive is equipped with a canopy for driver protection.

How much is a Terex TC 16 Twindrive Mini excavator (2006u20132016) worth?

The residual value of the Terex TC 16 Twindrive depends on the machine's individual parameters. Visit the LECTURA Valuation to check it.

Terex TC 16 Twindrive overview

Hydraulics

Clamshell grapple GL 1250, grab swing Ejector Cutting/milling unit Hydraulic hammer Quick-change adapter for hydraulic hammer Ground auger Other work attachments are available on request Load hook, can be bolted to bucket rod shell Set 250 mm wide, contents 45 l

Tyres / Tracks

OTHER OPTIONAL EQUIPMENT
Mechanical quick attachment system (QAS) Mechanical quick coupling system (Original "Lehnhoff"), type MS01 Crane lift beam Track shoes with „Felasto" tiles Boom mounted working fl ood light Rear guard Electric refueling pump Special coating/stick Front dozer blade - long version Other optional equipment available on request

Dimensions and weight

Width (outside edge of crawler tracks)	990 - 1340 mm
Width of rubber / steel crawler tracks	230 mm
Total length (sprocket - idler)	1130 mm
Total length (undercarriage)	1490 mm

Transport weight (incl. bucket)	1900 kg
Operating weight as per ISO 6016 (with driver)	1975 kg
Total length (driving position)	2800 mm
Total length (trailer transport position)	3800 (3720*) mm
Total height (driving position)	2400 mm
Total width (crawler tracks retracted)	998 mm
Uppercarriage tailswing	1280 mm
Uppercarriage frontswing	1250 mm
Working envelope 180° / 360°	2530 / 2560 mm
Ground clearance	170 mm
Bucket digging force (ISO 6015)	14400 N
Stick digging force (ISO 6015)	9300 (8300*) N
Specifi c ground pressure (rubber crawler tracks)	0	29 daN/cm2"

Other features

OPERATOR'S COMPARTMENT
Cab: spacious, clearly structured with safety glass, upper front window part slippery under cab canopy. Rear panoramic window, skylight, 2 doors of the same size. Cab heater with disc defroster by means of integrated hot water heat exchanger. Comfort seat, armrests, driver weight adjustment adjustable. H3 halogen work lights. Incl. cable drum with 15 m supply cable and CEE 32A port. MSG 20 driver's seat (base model), fabric cover, lap belt, driverweight adjustable 250 mm wide, displacement 24 l 300 mm wide, capacity 30 l 400 mm wide, contents 44 l 500 mm wide, volume 55 l 600 mm wide, power 71 l 1000 mm wide, weight 91 l 850 mm wide, load rating 61 l

Tables

On-board electrics for diesel operation	12 V DC
Battery	12 V / 71 Ah
Alternator	12 V / 40 A
Starter motor	12 V / 1.7 kW
On-board electrics for electrical operation	400 V / 50 Hz

Independent of drive train	sensitive control via separate hand lever."
Width x height	1340 x 235 mm
Dozer cut below ground	160 mm
Dozer lift above ground	200 mm
Slope angle	25°

Travel speed	forward and reverse"	0 - 2.4 km/h
Gradeability	max. 60%
Drawbar pull	1160 daN

Manufacturer, model	Mitsubishi, L3E"
Type	3-cylinder diesel engine	EPA/Tier 4 Final (2008)"
Method of operation	4-stroke	swirl chamber injection"
Stroke displacement	952 cm3
Power rating as per ISO 9249 at 2250rpm	13.1 kW (18 PS)
Torque	55 Nm at 2100 rpm
Cooling system	Water

Type	Air-cooled electric motor
Output at 2950 rpm	11 kW (15 PS)
Electrical voltage	400 Volt / 50 Hz
Electrical connected load at 400 V / 50 Hz	32 A

Noise emission ambience LWA	93 dB (A)
Noise emission cab LpA	78 dB (A)
Measured in dynamic measuring cycle as per Directive 2000/14/EC.
*with 1300 mm dipperstick (optional)
**FOPS-approved only with skylight guard (optional)

Bucket hinge height	Load distance from the centre of the slewing ring
1300 mm dipperstick	1.5 m	2.0 m	2.5 m	3.0 m
	UE	UR	UE	UR	UE	UR	UE	UR
Longit.	Transverse	Longit.	Transverse	Longit.	Transverse	Longit.	Transverse	Longit.	Transverse	Longit.	Transverse	Longit.	Transverse	Longit.	Transverse
2.0 m	S	-	-	-	-	-	-	-	-	0.45	0.46	0.45	0.29	0.35	0.32	0.35	0.22
	A	-	-	-	-	-	-	-	-	0.30	0.45	0.30	0.27	0.21	0.30	0.21	0.21
1.0 m	S	-	-	-	-	0.64	0.61	0.64	0.44	0.40	0.39	0.40	0.28	0.35	0.32	0.35	0.21
	A	-	-	-	-	0.40	0.61	0.40	0.36	0.28	0.39	0.28	0.26	0.23	0.30	0.23	0.19
0 m	S	0.99	0.78	0.99	0.53	0.61	0.53	0.61	0.36	0.44	0.37	0.44	0.27	0.32	0.31	0.32	0.20
	A	0.58	0.75	0.58	0.45	0.36	0.50	0.36	0.32	0.26	0.37	0.26	0.24	0.21	0.29	0.21	0.18
-0.75 m	S	0.68	0.77	0.68	0.50	0.49	0.51	0.49	0.34	0.35	0.37	0.35	0.25	0.25	0.30	0.25	0.19
	A	0.50	0.74	0.50	0.47	0.35	0.52	0.35	0.30	0.29	0.37	0.29	0.23	0.20	0.28	0.20	0.17

Bucket hinge height	Load distance from the centre of the slewing ring
1100 mm dipperstick	1.5 m	2.0 m	2.5 m	3.0 m
	UE	UR	UE	UR	UE	UR	UE	UR
Longit.	Transverse	Longit.	Transverse	Longit.	Transverse	Longit.	Transverse	Longit.	Transverse	Longit.	Transverse	Longit.	Transverse	Longit.	Transverse
2.0 m	S	-	-	-	-	0.56	0.47	0.56	0.37	0.54	0.38	0.54	0.29	-	-	-	-
A	-	-	-	-	0.38	0.46	0.38	0.32	0.34	0.37	0.34	0.24	-	-	-	-
1.0 m	S	0.89	0.79	0.89	0.69	0.70	0.50	0.70	0.39	0.56	0.37	0.56	0.27	0.35	0.32	0.35	0.21
A	0.54	0.77	0.54	0.60	0.38	0.49	0.38	0.32	0.28	0.36	0.28	0.23	0.19	0.30	0.19	0.19
0 m	S	0.92	0.71	0.92	0.49	0.64	0.47	0.64	0.33	0.44	0.35	0.44	0.25	0.31	0.31	0.31	0.20
	A	0.59	0.69	0.59	0.41	0.34	0.46	0.34	0.28	0.23	0.34	0.23	0.21	0.18	0.29	0.18	0.18
-0.75 m	S	0.64	0.61	0.64	0.42	0.46	0.46	0.46	0.31	0.33	0.33	0.33	0.24	0.22	0.30	0.22	0.19
	A	0.50	0.61	0.50	0.37	0.29	0.46	0.29	0.27	0.23	0.33	0.23	0.20	0.17	0.28	0.17	0.17

Machine inspection

Ask for inspection of your Terex TC 16 Twindrive from experts

Mevas is an international operating inspection service for used heavy machinery. Construction machinery inspectors are available in more than 20 countries.

Use this service to minimise the risk when buying used equipment. An inspection by Mevas costs less than repairing a defective hydraulic cylinder.

Enquire machine inspection

Provided by:

Buy & Rent

Mini Excavator Buyers Guide - price ranges of new and used models

At LECTURA we watch information since 40 years and using this data, we can support buyers with pricing lists of used mini excavators, such as Terex TC 16 Twindrive.

Check what new and used models of mini excavators you can get in each price range:

Data provided by

Compare Terex TC 16 Twindrive with similar Mini Excavators

Terex TC 16 Twindrive

Weight:: 1.65 t

Transport length:: 3.8 m

Transport width:: 0.99 m

Transport height:: 2.29 m

Wacker Neuson ET 18

Weight:: 1.74 t

Transport length:: 3.8 m

Transport width:: 0.99 m

Transport height:: 2.29 m

Caterpillar 301.7D

Weight:: 1.72 t

Transport length:: 3.855 m

Transport width:: 0.99 m

Transport height:: 2.29 m

JCB 801

Weight:: 1.43 t

Transport width:: 0.98 m

Bobcat X 220

Weight:: 1.5 t

Transport width:: 0.98 m

Do you want to see more detailed comparison?

Show me!

Check other popular models from Mini Excavators

Terex TC 20

Weight:: 1.95 t

Terex TC 37

Weight:: 3.57 t

Terex TC 29

Weight:: 2.85 t

Terex TC 35

Weight:: 3.5 t

Terex TC 60

Weight:: 5.65 t

New Holland E30C

Weight:: 3 t

New Holland E60C

Kubota U17

Weight:: 1.73 t

John Deere Construction 260

Weight:: 3.584 t

John Deere Construction 50

Weight:: 4.3 t

John Deere Construction 70

Yanmar SV40

Weight:: 4.32 t

Sell Terex TC 16 Twindrive

Mini Excavators appraisal with LECTURA Valuation

Whether you need to calculate value of your Terex TC 16 Twindrive or valuation of your Mini Excavators fleet, LECTURA Valuation will help. Simply fill the machine details and see the values for Mini Excavators in few clicks.

Valuate right now!

Data provided by

Spare parts & Components

Get spare parts for Terex TC 16 Twindrive easily from our partners

Do your lookup for high quality parts for Terex TC 16 Twindrive online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Mini Excavators spare parts easily today - worldwide.

Get parts for Terex TC 16 Twindrive now!

Transport

Mini Excavators Transport & Shipping Services

In case you look for a transport your machine, take advantage of our services. Check the ideal transport quotes for Mini Excavators built on dimensions and weight. Our partners provide major services to meet your demands.

Ask for transport price

Data provided by

News

Construction News by LECTURA 22.06.2026